| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1586572830-22727-1-git-send-email-sivaprak@codeaurora.org>
Date: Sat, 11 Apr 2020 08:10:30 +0530
From: Sivaprakash Murugesan <sivaprak@...eaurora.org>
To: agross@...nel.org, bjorn.andersson@...aro.org, robh+dt@...nel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Sivaprakash Murugesan <sivaprak@...eaurora.org>
Subject: [PATCH] arm64: dts: ipq8074: Re-arrange dts nodes based on address
This patch re-arranges ipq8074 device nodes based on node address
followed by node names followed by node labels.
Suggested-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@...eaurora.org>
---
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 112 ++++---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 474 +++++++++++++++---------------
2 files changed, 292 insertions(+), 294 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 70be3f9..6754cb0 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -24,63 +24,61 @@
device_type = "memory";
reg = <0x0 0x40000000 0x0 0x20000000>;
};
+};
+
+&blsp1_i2c2 {
+ status = "ok";
+};
+
+&blsp1_spi1 {
+ status = "ok";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&blsp1_uart3 {
+ status = "ok";
+};
+
+&blsp1_uart5 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+ perst-gpio = <&tlmm 61 0x1>;
+};
+
+&pcie1 {
+ status = "ok";
+ perst-gpio = <&tlmm 58 0x1>;
+};
+
+&pcie_phy0 {
+ status = "ok";
+};
+
+&pcie_phy1 {
+ status = "ok";
+};
+
+&qpic_bam {
+ status = "ok";
+};
+
+&qpic_nand {
+ status = "ok";
- soc {
- serial@...3000 {
- status = "ok";
- };
-
- spi@...5000 {
- status = "ok";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
- };
-
- serial@...1000 {
- status = "ok";
- };
-
- i2c@...6000 {
- status = "ok";
- };
-
- dma@...4000 {
- status = "ok";
- };
-
- nand@...0000 {
- status = "ok";
-
- nand@0 {
- reg = <0>;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
- nand-bus-width = <8>;
- };
- };
-
- phy@...00 {
- status = "ok";
- };
-
- phy@...00 {
- status = "ok";
- };
-
- pci@...00000 {
- status = "ok";
- perst-gpio = <&tlmm 58 0x1>;
- };
-
- pci@...00000 {
- status = "ok";
- perst-gpio = <&tlmm 61 0x1>;
- };
+ nand@0 {
+ reg = <0>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
};
};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 2b31823..5303821 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -10,15 +10,111 @@
model = "Qualcomm Technologies, Inc. IPQ8074";
compatible = "qcom,ipq8074";
+ clocks {
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+
+ xo: xo {
+ compatible = "fixed-clock";
+ clock-frequency = <19200000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ cpus {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x2>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x3>;
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <0x2>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
soc: soc {
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
+ pcie_phy0: phy@...00 {
+ compatible = "qcom,ipq8074-qmp-pcie-phy";
+ reg = <0x00086000 0x1000>;
+ #phy-cells = <0>;
+ clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+ clock-names = "pipe_clk";
+ clock-output-names = "pcie20_phy0_pipe_clk";
+
+ resets = <&gcc GCC_PCIE0_PHY_BCR>,
+ <&gcc GCC_PCIE0PHY_PHY_BCR>;
+ reset-names = "phy",
+ "common";
+ status = "disabled";
+ };
+
+ pcie_phy1: phy@...00 {
+ compatible = "qcom,ipq8074-qmp-pcie-phy";
+ reg = <0x0008e000 0x1000>;
+ #phy-cells = <0>;
+ clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
+ clock-names = "pipe_clk";
+ clock-output-names = "pcie20_phy1_pipe_clk";
+
+ resets = <&gcc GCC_PCIE1_PHY_BCR>,
+ <&gcc GCC_PCIE1PHY_PHY_BCR>;
+ reset-names = "phy",
+ "common";
+ status = "disabled";
+ };
+
tlmm: pinctrl@...0000 {
compatible = "qcom,ipq8074-pinctrl";
- reg = <0x1000000 0x300000>;
+ reg = <0x01000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&tlmm 0 0 70>;
@@ -66,102 +162,16 @@
};
};
- intc: interrupt-controller@...0000 {
- compatible = "qcom,msm-qgic2";
- interrupt-controller;
- #interrupt-cells = <0x3>;
- reg = <0xb000000 0x1000>, <0xb002000 0x1000>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- timer@...0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- compatible = "arm,armv7-timer-mem";
- reg = <0xb120000 0x1000>;
- clock-frequency = <19200000>;
-
- frame@...0000 {
- frame-number = <0>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb121000 0x1000>,
- <0xb122000 0x1000>;
- };
-
- frame@...3000 {
- frame-number = <1>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb123000 0x1000>;
- status = "disabled";
- };
-
- frame@...4000 {
- frame-number = <2>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb124000 0x1000>;
- status = "disabled";
- };
-
- frame@...5000 {
- frame-number = <3>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb125000 0x1000>;
- status = "disabled";
- };
-
- frame@...6000 {
- frame-number = <4>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb126000 0x1000>;
- status = "disabled";
- };
-
- frame@...7000 {
- frame-number = <5>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb127000 0x1000>;
- status = "disabled";
- };
-
- frame@...8000 {
- frame-number = <6>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb128000 0x1000>;
- status = "disabled";
- };
- };
-
gcc: gcc@...0000 {
compatible = "qcom,gcc-ipq8074";
- reg = <0x1800000 0x80000>;
+ reg = <0x01800000 0x80000>;
#clock-cells = <0x1>;
#reset-cells = <0x1>;
};
- blsp1_uart5: serial@...3000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x78b3000 0x200>;
- interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-0 = <&serial_4_pins>;
- pinctrl-names = "default";
- status = "disabled";
- };
-
blsp_dma: dma@...4000 {
compatible = "qcom,bam-v1.7.0";
- reg = <0x7884000 0x2b000>;
+ reg = <0x07884000 0x2b000>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
@@ -171,7 +181,7 @@
blsp1_uart1: serial@...f000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x78af000 0x200>;
+ reg = <0x078af000 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
@@ -181,7 +191,7 @@
blsp1_uart3: serial@...1000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x78b1000 0x200>;
+ reg = <0x078b1000 0x200>;
interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
@@ -194,11 +204,23 @@
status = "disabled";
};
+ blsp1_uart5: serial@...3000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x078b3000 0x200>;
+ interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ pinctrl-0 = <&serial_4_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
blsp1_spi1: spi@...5000 {
compatible = "qcom,spi-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x78b5000 0x600>;
+ reg = <0x078b5000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
spi-max-frequency = <50000000>;
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
@@ -215,7 +237,7 @@
compatible = "qcom,i2c-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x78b6000 0x600>;
+ reg = <0x078b6000 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
@@ -232,7 +254,7 @@
compatible = "qcom,i2c-qup-v2.2.1";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x78b7000 0x600>;
+ reg = <0x078b7000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
@@ -245,7 +267,7 @@
qpic_bam: dma@...4000 {
compatible = "qcom,bam-v1.7.0";
- reg = <0x7984000 0x1a000>;
+ reg = <0x07984000 0x1a000>;
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QPIC_AHB_CLK>;
clock-names = "bam_clk";
@@ -256,7 +278,7 @@
qpic_nand: nand@...0000 {
compatible = "qcom,ipq8074-nand";
- reg = <0x79b0000 0x10000>;
+ reg = <0x079b0000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&gcc GCC_QPIC_CLK>,
@@ -272,104 +294,85 @@
status = "disabled";
};
- pcie_phy0: phy@...00 {
- compatible = "qcom,ipq8074-qmp-pcie-phy";
- reg = <0x86000 0x1000>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
- clock-names = "pipe_clk";
- clock-output-names = "pcie20_phy0_pipe_clk";
+ intc: interrupt-controller@...0000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <0x3>;
+ reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+ };
- resets = <&gcc GCC_PCIE0_PHY_BCR>,
- <&gcc GCC_PCIE0PHY_PHY_BCR>;
- reset-names = "phy",
- "common";
- status = "disabled";
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
- pcie0: pci@...00000 {
- compatible = "qcom,pcie-ipq8074";
- reg = <0x20000000 0xf1d
- 0x20000f20 0xa8
- 0x80000 0x2000
- 0x20100000 0x1000>;
- reg-names = "dbi", "elbi", "parf", "config";
- device_type = "pci";
- linux,pci-domain = <0>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
- #address-cells = <3>;
- #size-cells = <2>;
+ timer@...0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0b120000 0x1000>;
+ clock-frequency = <19200000>;
- phys = <&pcie_phy0>;
- phy-names = "pciephy";
+ frame@...0000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b121000 0x1000>,
+ <0x0b122000 0x1000>;
+ };
- ranges = <0x81000000 0 0x20200000 0x20200000
- 0 0x100000 /* downstream I/O */
- 0x82000000 0 0x20300000 0x20300000
- 0 0xd00000>; /* non-prefetchable memory */
+ frame@...3000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b123000 0x1000>;
+ status = "disabled";
+ };
- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 75
- IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 78
- IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 79
- IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 83
- IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ frame@...4000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b124000 0x1000>;
+ status = "disabled";
+ };
- clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
- <&gcc GCC_PCIE0_AXI_M_CLK>,
- <&gcc GCC_PCIE0_AXI_S_CLK>,
- <&gcc GCC_PCIE0_AHB_CLK>,
- <&gcc GCC_PCIE0_AUX_CLK>;
+ frame@...5000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b125000 0x1000>;
+ status = "disabled";
+ };
- clock-names = "iface",
- "axi_m",
- "axi_s",
- "ahb",
- "aux";
- resets = <&gcc GCC_PCIE0_PIPE_ARES>,
- <&gcc GCC_PCIE0_SLEEP_ARES>,
- <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
- <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
- <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
- <&gcc GCC_PCIE0_AHB_ARES>,
- <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>;
- reset-names = "pipe",
- "sleep",
- "sticky",
- "axi_m",
- "axi_s",
- "ahb",
- "axi_m_sticky";
- status = "disabled";
- };
+ frame@...6000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b126000 0x1000>;
+ status = "disabled";
+ };
- pcie_phy1: phy@...00 {
- compatible = "qcom,ipq8074-qmp-pcie-phy";
- reg = <0x8e000 0x1000>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
- clock-names = "pipe_clk";
- clock-output-names = "pcie20_phy1_pipe_clk";
+ frame@...7000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b127000 0x1000>;
+ status = "disabled";
+ };
- resets = <&gcc GCC_PCIE1_PHY_BCR>,
- <&gcc GCC_PCIE1PHY_PHY_BCR>;
- reset-names = "phy",
- "common";
- status = "disabled";
+ frame@...8000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0b128000 0x1000>;
+ status = "disabled";
+ };
};
pcie1: pci@...00000 {
compatible = "qcom,pcie-ipq8074";
reg = <0x10000000 0xf1d
0x10000f20 0xa8
- 0x88000 0x2000
+ 0x00088000 0x2000
0x10100000 0x1000>;
reg-names = "dbi", "elbi", "parf", "config";
device_type = "pci";
@@ -426,71 +429,68 @@
"axi_m_sticky";
status = "disabled";
};
- };
-
- cpus {
- #address-cells = <0x1>;
- #size-cells = <0x0>;
-
- CPU0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CPU1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- enable-method = "psci";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
- };
- CPU2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- enable-method = "psci";
- reg = <0x2>;
- next-level-cache = <&L2_0>;
- };
-
- CPU3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- enable-method = "psci";
- reg = <0x3>;
- next-level-cache = <&L2_0>;
- };
+ pcie0: pci@...00000 {
+ compatible = "qcom,pcie-ipq8074";
+ reg = <0x20000000 0xf1d
+ 0x20000f20 0xa8
+ 0x00080000 0x2000
+ 0x20100000 0x1000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
- L2_0: l2-cache {
- compatible = "cache";
- cache-level = <0x2>;
- };
- };
+ phys = <&pcie_phy0>;
+ phy-names = "pciephy";
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
+ ranges = <0x81000000 0 0x20200000 0x20200000
+ 0 0x100000 /* downstream I/O */
+ 0x82000000 0 0x20300000 0x20300000
+ 0 0xd00000>; /* non-prefetchable memory */
- pmu {
- compatible = "arm,armv8-pmuv3";
- interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 75
+ IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 78
+ IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 79
+ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 83
+ IRQ_TYPE_LEVEL_HIGH>; /* int_d */
- clocks {
- sleep_clk: sleep_clk {
- compatible = "fixed-clock";
- clock-frequency = <32000>;
- #clock-cells = <0>;
- };
+ clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
+ <&gcc GCC_PCIE0_AXI_M_CLK>,
+ <&gcc GCC_PCIE0_AXI_S_CLK>,
+ <&gcc GCC_PCIE0_AHB_CLK>,
+ <&gcc GCC_PCIE0_AUX_CLK>;
- xo: xo {
- compatible = "fixed-clock";
- clock-frequency = <19200000>;
- #clock-cells = <0>;
+ clock-names = "iface",
+ "axi_m",
+ "axi_s",
+ "ahb",
+ "aux";
+ resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+ <&gcc GCC_PCIE0_SLEEP_ARES>,
+ <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+ <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
+ <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
+ <&gcc GCC_PCIE0_AHB_ARES>,
+ <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>;
+ reset-names = "pipe",
+ "sleep",
+ "sticky",
+ "axi_m",
+ "axi_s",
+ "ahb",
+ "axi_m_sticky";
+ status = "disabled";
};
};
};
--
2.7.4
Powered by blists - more mailing lists