linux-kernel - [PATCH v3] Drivers: hv: vmbus: Fix Suspend-to-Idle for Generation-2 VM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1586663435-36243-1-git-send-email-decui@microsoft.com>
Date:   Sat, 11 Apr 2020 20:50:35 -0700
From:   Dexuan Cui <decui@...rosoft.com>
To:     kys@...rosoft.com, haiyangz@...rosoft.com, sthemmin@...rosoft.com,
        wei.liu@...nel.org, linux-hyperv@...r.kernel.org,
        linux-kernel@...r.kernel.org, mikelley@...rosoft.com,
        vkuznets@...hat.com
Cc:     Dexuan Cui <decui@...rosoft.com>, stable@...r.kernel.org
Subject: [PATCH v3] Drivers: hv: vmbus: Fix Suspend-to-Idle for Generation-2 VM

Before the hibernation patchset (e.g. f53335e3289f), in a Generation-2
Linux VM on Hyper-V, the user can run "echo freeze > /sys/power/state" to
freeze the system, i.e. Suspend-to-Idle. The user can press the keyboard
or move the mouse to wake up the VM.

With the hibernation patchset, Linux VM on Hyper-V can hibernate to disk,
but Suspend-to-Idle is broken: when the synthetic keyboard/mouse are
suspended, there is no way to wake up the VM.

Fix the issue by not suspending and resuming the vmbus devices upon
Suspend-to-Idle.

Fixes: f53335e3289f ("Drivers: hv: vmbus: Suspend/resume the vmbus itself for hibernation")
Cc: stable@...r.kernel.org
Reviewed-by: Michael Kelley <mikelley@...rosoft.com>
Signed-off-by: Dexuan Cui <decui@...rosoft.com>
---

Changes in v2:
    Added "#define vmbus_suspend NULL", etc. for the case where
CONFIG_PM_SLEEP is not defined.
    Many thanks to kbuild test robot <lkp@...el.com> for this!

Changes in v3:
    Fixed a typo in the comment before "vmbus_bus_pm": thie -> this.
    Added Michael's Reviewed-by.

 drivers/hv/vmbus_drv.c | 43 ++++++++++++++++++++++++++++++++++---------
 1 file changed, 34 insertions(+), 9 deletions(-)

diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 029378c..f2985bd 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -950,6 +950,9 @@ static int vmbus_resume(struct device *child_device)
 
 	return drv->resume(dev);
 }
+#else
+#define vmbus_suspend NULL
+#define vmbus_resume NULL
 #endif /* CONFIG_PM_SLEEP */
 
 /*
@@ -969,11 +972,22 @@ static void vmbus_device_release(struct device *device)
 }
 
 /*
- * Note: we must use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS rather than
- * SET_SYSTEM_SLEEP_PM_OPS: see the comment before vmbus_bus_pm.
+ * Note: we must use the "noirq" ops: see the comment before vmbus_bus_pm.
+ *
+ * suspend_noirq/resume_noirq are set to NULL to support Suspend-to-Idle: we
+ * shouldn't suspend the vmbus devices upon Suspend-to-Idle, otherwise there
+ * is no way to wake up a Generation-2 VM.
+ *
+ * The other 4 ops are for hibernation.
  */
+
 static const struct dev_pm_ops vmbus_pm = {
-	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(vmbus_suspend, vmbus_resume)
+	.suspend_noirq	= NULL,
+	.resume_noirq	= NULL,
+	.freeze_noirq	= vmbus_suspend,
+	.thaw_noirq	= vmbus_resume,
+	.poweroff_noirq	= vmbus_suspend,
+	.restore_noirq	= vmbus_resume,
 };
 
 /* The one and only one */
@@ -2253,6 +2267,9 @@ static int vmbus_bus_resume(struct device *dev)
 
 	return 0;
 }
+#else
+#define vmbus_bus_suspend NULL
+#define vmbus_bus_resume NULL
 #endif /* CONFIG_PM_SLEEP */
 
 static const struct acpi_device_id vmbus_acpi_device_ids[] = {
@@ -2263,16 +2280,24 @@ static int vmbus_bus_resume(struct device *dev)
 MODULE_DEVICE_TABLE(acpi, vmbus_acpi_device_ids);
 
 /*
- * Note: we must use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS rather than
- * SET_SYSTEM_SLEEP_PM_OPS, otherwise NIC SR-IOV can not work, because the
- * "pci_dev_pm_ops" uses the "noirq" callbacks: in the resume path, the
- * pci "noirq" restore callback runs before "non-noirq" callbacks (see
+ * Note: we must use the "no_irq" ops, otherwise hibernation can not work with
+ * PCI device assignment, because "pci_dev_pm_ops" uses the "noirq" ops: in
+ * the resume path, the pci "noirq" restore op runs before "non-noirq" op (see
  * resume_target_kernel() -> dpm_resume_start(), and hibernation_restore() ->
  * dpm_resume_end()). This means vmbus_bus_resume() and the pci-hyperv's
- * resume callback must also run via the "noirq" callbacks.
+ * resume callback must also run via the "noirq" ops.
+ *
+ * Set suspend_noirq/resume_noirq to NULL for Suspend-to-Idle: see the comment
+ * earlier in this file before vmbus_pm.
  */
+
 static const struct dev_pm_ops vmbus_bus_pm = {
-	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(vmbus_bus_suspend, vmbus_bus_resume)
+	.suspend_noirq	= NULL,
+	.resume_noirq	= NULL,
+	.freeze_noirq	= vmbus_bus_suspend,
+	.thaw_noirq	= vmbus_bus_resume,
+	.poweroff_noirq	= vmbus_bus_suspend,
+	.restore_noirq	= vmbus_bus_resume
 };
 
 static struct acpi_driver vmbus_acpi_driver = {
-- 
1.8.3.1