[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200415151234.GA25862@bogus>
Date: Wed, 15 Apr 2020 10:12:34 -0500
From: Rob Herring <robh@...nel.org>
To: Kiran Gunda <kgunda@...eaurora.org>
Cc: bjorn.andersson@...aro.org, jingoohan1@...il.com,
lee.jones@...aro.org, b.zolnierkie@...sung.com,
dri-devel@...ts.freedesktop.org, daniel.thompson@...aro.org,
jacek.anaszewski@...il.com, pavel@....cz, mark.rutland@....com,
linux-leds@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Dan Murphy <dmurphy@...com>,
linux-arm-msm@...r.kernel.org,
Subbaraman Narayanamurthy <subbaram@...eaurora.org>
Subject: Re: [PATCH V5 3/4] backlight: qcom-wled: Add WLED5 bindings
On Tue, Apr 07, 2020 at 09:17:09PM +0530, Kiran Gunda wrote:
> Add WLED5 specific bindings.
>
checkpatch.pl complains about some trailing whitespace. The previous
patch too.
> Signed-off-by: Kiran Gunda <kgunda@...eaurora.org>
> Signed-off-by: Subbaraman Narayanamurthy <subbaram@...eaurora.org>
> ---
> .../bindings/leds/backlight/qcom-wled.yaml | 60 ++++++++++++++++++++--
> 1 file changed, 57 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> index 770e780..5714631 100644
> --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> @@ -21,6 +21,7 @@ properties:
> - qcom,pm8941-wled
> - qcom,pmi8998-wled
> - qcom,pm660l-wled
> + - qcom,pm8150l-wled
>
> reg:
> maxItems: 1
> @@ -28,12 +29,13 @@ properties:
> default-brightness:
> description:
> brightness value on boot.
> - minimum: 0
> - maximum: 4095
> - default: 2048
>
> label: true
>
> + max-brightness:
> + description:
> + Maximum brightness level.
> +
> qcom,cs-out:
> description:
> enable current sink output.
> @@ -130,6 +132,31 @@ properties:
> This feature is not supported for WLED3.
> type: boolean
>
> + qcom,modulator-sel:
> + description:
Need a '|' at the end to preserve formatting.
> + Selects the modulator used for brightness modulation.
> + Allowed values are,
> + 0 - Modulator A
> + 1 - Modulator B
> + This property is applicable only to WLED5 peripheral.
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + - enum: [ 0, 1 ]
> + - default: 0
> +
> + qcom,cabc-sel:
> + description:
Need a '|'.
> + Selects the CABC pin signal used for brightness modulation.
> + Allowed values are,
> + 0 - CABC disabled
> + 1 - CABC 1
> + 2 - CABC 2
> + 3 - External signal (e.g. LPG) is used for dimming
> + This property is applicable only to WLED5 peripheral.
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + - enum: [ 0, 1, 2, 3 ]
> +
> allOf:
> - if:
> properties:
> @@ -179,6 +206,33 @@ allOf:
> - const: ovp
> - const: short
>
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,pm8150l-wled
> +
> + then:
> + properties:
> + default-brightness:
> + minimum: 0
> + maximum: 32767
> +
> + max-brightness:
> + minimum: 0
> + maximum: 32767
> +
> + else:
> + properties:
> + default-brightness:
> + minimum: 0
> + maximum: 4095
Wrong indentation.
> +
> + max-brightness:
> + minimum: 0
> + maximum: 4095
> +
> required:
> - compatible
> - reg
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
Powered by blists - more mailing lists