| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 15 Apr 2020 14:23:29 +0530
From: "Sandeep Maheswaram (Temp)" <sanm@...eaurora.org>
To: Rob Herring <robh@...nel.org>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Mark Rutland <mark.rutland@....com>,
Felipe Balbi <balbi@...nel.org>,
Stephen Boyd <swboyd@...omium.org>,
Doug Anderson <dianders@...omium.org>,
Matthias Kaehlcke <mka@...omium.org>,
linux-arm-msm@...r.kernel.org, linux-usb@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Manu Gautam <mgautam@...eaurora.org>
Subject: Re: [PATCH v5 1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3
bindings
Hi Rob,
Any suggestions to solve this error in assigned-clock-rates
Regards
Sandeep
On 4/6/2020 10:09 PM, Sandeep Maheswaram (Temp) wrote:
> Hi Rob,
>
> On 4/4/2020 10:47 PM, Rob Herring wrote:
>> On Thu, Mar 26, 2020 at 12:36:07PM +0530, Sandeep Maheswaram wrote:
>>> Convert USB DWC3 bindings to DT schema format using json-schema.
>>>
>>> Signed-off-by: Sandeep Maheswaram <sanm@...eaurora.org>
>>> ---
>>> .../devicetree/bindings/usb/qcom,dwc3.txt | 104
>>> --------------
>>> .../devicetree/bindings/usb/qcom,dwc3.yaml | 158
>>> +++++++++++++++++++++
>>> 2 files changed, 158 insertions(+), 104 deletions(-)
>>> delete mode 100644
>>> Documentation/devicetree/bindings/usb/qcom,dwc3.txt
>>> create mode 100644
>>> Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
>>
>>> diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
>>> b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
>>> new file mode 100644
>>> index 0000000..0f69475
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
>>> @@ -0,0 +1,158 @@
>>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>>> +
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Qualcomm SuperSpeed DWC3 USB SoC controller
>>> +
>>> +maintainers:
>>> + - Manu Gautam <mgautam@...eaurora.org>
>>> +
>>> +properties:
>>> + compatible:
>>> + items:
>>> + - enum:
>>> + - qcom,msm8996-dwc3
>>> + - qcom,msm8998-dwc3
>>> + - qcom,sdm845-dwc3
>>> + - const: qcom,dwc3
>>> +
>>> + reg:
>>> + description: Offset and length of register set for QSCRATCH
>>> wrapper
>>> + maxItems: 1
>>> +
>>> + "#address-cells":
>>> + enum: [ 1, 2 ]
>>> +
>>> + "#size-cells":
>>> + enum: [ 1, 2 ]
>>> +
>>> + power-domains:
>>> + description: specifies a phandle to PM domain provider node
>>> + maxItems: 1
>>> +
>>> + clocks:
>>> + description:
>>> + A list of phandle and clock-specifier pairs for the clocks
>>> + listed in clock-names.
>>> + items:
>>> + - description: System Config NOC clock.
>>> + - description: Master/Core clock, has to be >= 125 MHz
>>> + for SS operation and >= 60MHz for HS operation.
>>> + - description: System bus AXI clock.
>>> + - description: Mock utmi clock needed for ITP/SOF generation
>>> + in host mode. Its frequency should be 19.2MHz.
>>> + - description: Sleep clock, used for wakeup when
>>> + USB3 core goes into low power mode (U3).
>>> +
>>> + clock-names:
>>> + items:
>>> + - const: cfg_noc
>>> + - const: core
>>> + - const: iface
>>> + - const: mock_utmi
>>> + - const: sleep
>>> +
>>> + assigned-clocks:
>>> + items:
>>> + - description: Phandle and clock specifier of MOCK_UTMI_CLK.
>>> + - description: Phandle and clock specifoer of MASTER_CLK.
>>> +
>>> + assigned-clock-rates:
>>> + maxItems: 2
>> Need to drop this as it is redundant. Soon this will generate an error.
> Will do in next version.
>>> + items:
>>> + - description: Must be 19.2MHz (19200000).
>> Sounds like a constraint:
>>
>> - const: 19200000
>>
>>> + - description: Must be >= 60 MHz in HS mode, >= 125 MHz in SS
>>> mode.
>> - minimum: 60000000
>> maximum: ?
>
> Tried as below but facing errors
>
> assigned-clock-rates:
> items:
> - const: 19200000
> - minimum: 60000000
> maximum: 150000000
>
> Errors
>
> linux-next/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dt.yaml:
> usb@...8800: assigned-clock-rates: Additional items are not allowed
> ([150000000] was unexpected)
> linux-next/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dt.yaml:
> usb@...8800: assigned-clock-rates:0: [19200000] is too short
> linux-next/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dt.yaml:
> usb@...8800: assigned-clock-rates: [[19200000], [150000000]] is too long
>
>>> +
>>> + resets:
>>> + maxItems: 1
>>> +
>>> + interrupts:
>>> + items:
>>> + - description: The interrupt that is asserted
>>> + when a wakeup event is received on USB2 bus.
>>> + - description: The interrupt that is asserted
>>> + when a wakeup event is received on USB3 bus.
>>> + - description: Wakeup event on DM line.
>>> + - description: Wakeup event on DP line.
>>> +
>>> + interrupt-names:
>>> + items:
>>> + - const: hs_phy_irq
>>> + - const: ss_phy_irq
>>> + - const: dm_hs_phy_irq
>>> + - const: dp_hs_phy_irq
>>> +
>>> + qcom,select-utmi-as-pipe-clk:
>>> + description:
>>> + If present, disable USB3 pipe_clk requirement.
>>> + Used when dwc3 operates without SSPHY and only
>>> + HS/FS/LS modes are supported.
>>> + type: boolean
>>> +
>>> +# Required child node:
>>> +
>>> +patternProperties:
>>> + "^dwc3@[0-9a-f]+$":
>>> + type: object
>>> + description:
>>> + A child node must exist to represent the core DWC3 IP block
>>> + The content of the node is defined in dwc3.txt.
>>> +
>>> +required:
>>> + - compatible
>>> + - reg
>>> + - "#address-cells"
>>> + - "#size-cells"
>>> + - power-domains
>>> + - clocks
>>> + - clock-names
>>> +
>>> +examples:
>>> + - |
>>> + #include <dt-bindings/clock/qcom,gcc-sdm845.h>
>>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>>> + #include <dt-bindings/interrupt-controller/irq.h>
>>> + usb@...8800 {
>>> + compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
>>> + reg = <0 0x0a6f8800 0 0x400>;
>>> +
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> +
>>> + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
>>> + <&gcc GCC_USB30_PRIM_MASTER_CLK>,
>>> + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
>>> + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
>>> + <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
>>> + clock-names = "cfg_noc", "core", "iface", "mock_utmi",
>>> + "sleep";
>>> +
>>> + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
>>> + <&gcc GCC_USB30_PRIM_MASTER_CLK>;
>>> + assigned-clock-rates = <19200000>, <150000000>;
>>> +
>>> + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
>>> + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupt-names = "hs_phy_irq", "ss_phy_irq",
>>> + "dm_hs_phy_irq", "dp_hs_phy_irq";
>>> +
>>> + power-domains = <&gcc USB30_PRIM_GDSC>;
>>> +
>>> + resets = <&gcc GCC_USB30_PRIM_BCR>;
>>> +
>>> + dwc3@...0000 {
>>> + compatible = "snps,dwc3";
>>> + reg = <0 0x0a600000 0 0xcd00>;
>> You need 'ranges' in the parent for this address to be translatable.
> Will add in next version.
>>
>>> + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
>>> + iommus = <&apps_smmu 0x740 0>;
>>> + snps,dis_u2_susphy_quirk;
>>> + snps,dis_enblslpm_quirk;
>>> + phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
>>> + phy-names = "usb2-phy", "usb3-phy";
>>> + };
>>> + };
>>> --
>>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
>>> member
>>> of Code Aurora Forum, hosted by The Linux Foundation
>>>
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Powered by blists - more mailing lists