[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <875zdzx5zd.fsf@vitty.brq.redhat.com>
Date: Thu, 16 Apr 2020 09:08:38 +0200
From: Vitaly Kuznetsov <vkuznets@...hat.com>
To: Sean Christopherson <sean.j.christopherson@...el.com>
Cc: Wanpeng Li <wanpengli@...cent.com>,
Jim Mattson <jmattson@...gle.com>,
Joerg Roedel <joro@...tes.org>, kvm@...r.kernel.org,
linux-kernel@...r.kernel.org, Paolo Bonzini <pbonzini@...hat.com>
Subject: Re: [PATCH] KVM: nVMX: Remove non-functional "support" for CR3 target values
Sean Christopherson <sean.j.christopherson@...el.com> writes:
> Remove all references to cr3_target_value[0-3] and replace the fields
> in vmcs12 with "dead_space" to preserve the vmcs12 layout. KVM doesn't
> support emulating CR3-target values, despite a variety of code that
> implies otherwise, as KVM unconditionally reports '0' for the number of
> supported CR3-target values.
>
> This technically fixes a bug where KVM would incorrectly allow VMREAD
> and VMWRITE to nonexistent fields, i.e. cr3_target_value[0-3]. Per
> Intel's SDM, the number of supported CR3-target values reported in
> VMX_MISC also enumerates the existence of the associated VMCS fields:
>
> If a future implementation supports more than 4 CR3-target values, they
> will be encoded consecutively following the 4 encodings given here.
>
> Alternatively, the "bug" could be fixed by actually advertisting support
> for 4 CR3-target values, but that'd likely just enable kvm-unit-tests
> given that no one has complained about lack of support for going on ten
> years, e.g. KVM, Xen and HyperV don't use CR3-target values.
>
> Signed-off-by: Sean Christopherson <sean.j.christopherson@...el.com>
> ---
>
> Krish's patch to allow L1 to disable unrestricted guest got me poking
> around the related code. That led me into nested_vmx_exit_handled_cr()
> and handle_cr(). handle_cr() does WARN_ON_ONCE(enable_unrestricted_guest)
> in the MOV-to-CR3 path, as KVM should never enable CR3-exiting for L1.
> But the CR3-target matching nested_vmx_exit_handled_cr() meant that it
> would be possible to trigger the warn by enabling CR3-exiting in L1 with
> a valid list of CR3-targets. I got so far as to write a patch and a unit
> test, and then I checked MSR_IA32_VMX_MISC under KVM...
>
> AFAICT, properly emulating CR3-targets would be a trivial patch. But, I
> don't think there would be any meaningful users, e.g. Xen is the one
> hypervisor (that I am aware of) that runs with EPT disabled for certain
> use cases, and even Xen doesn't bother with CR3-targets. On the other
> hand, the odds of introducing a bug of one form or another seem high.
>
> Amusing side note, Xen's only reference to vmcs.CR3_TARGET_VALUE* is in
> its vmcs_dump_vcpu(), which explains why KVM's dump_vmcs() bothers to spit
> out the unused CR3-target fields :-).
>
> Documentation/virt/kvm/nested-vmx.rst | 5 +----
> arch/x86/kvm/vmx/evmcs.c | 8 --------
> arch/x86/kvm/vmx/nested.c | 17 -----------------
> arch/x86/kvm/vmx/vmcs12.c | 4 ----
> arch/x86/kvm/vmx/vmcs12.h | 10 ++--------
> arch/x86/kvm/vmx/vmx.c | 9 ---------
> 6 files changed, 3 insertions(+), 50 deletions(-)
'git grep CR3_TARGET_VALUE' tells me we also have stuff in selftests:
tools/testing/selftests/kvm/include/evmcs.h: case CR3_TARGET_VALUE0:
tools/testing/selftests/kvm/include/evmcs.h: case CR3_TARGET_VALUE1:
tools/testing/selftests/kvm/include/evmcs.h: case CR3_TARGET_VALUE2:
tools/testing/selftests/kvm/include/evmcs.h: case CR3_TARGET_VALUE3:
tools/testing/selftests/kvm/include/evmcs.h: case CR3_TARGET_VALUE0:
tools/testing/selftests/kvm/include/evmcs.h: case CR3_TARGET_VALUE1:
tools/testing/selftests/kvm/include/evmcs.h: case CR3_TARGET_VALUE2:
tools/testing/selftests/kvm/include/evmcs.h: case CR3_TARGET_VALUE3:
tools/testing/selftests/kvm/include/x86_64/vmx.h: CR3_TARGET_VALUE0 = 0x00006008,
tools/testing/selftests/kvm/include/x86_64/vmx.h: CR3_TARGET_VALUE1 = 0x0000600a,
tools/testing/selftests/kvm/include/x86_64/vmx.h: CR3_TARGET_VALUE2 = 0x0000600c,
tools/testing/selftests/kvm/include/x86_64/vmx.h: CR3_TARGET_VALUE3 = 0x0000600e,
we should probably clean it up al well.
>
> diff --git a/Documentation/virt/kvm/nested-vmx.rst b/Documentation/virt/kvm/nested-vmx.rst
> index 592b0ab6970b..89851cbb7df9 100644
> --- a/Documentation/virt/kvm/nested-vmx.rst
> +++ b/Documentation/virt/kvm/nested-vmx.rst
> @@ -116,10 +116,7 @@ struct shadow_vmcs is ever changed.
> natural_width cr4_guest_host_mask;
> natural_width cr0_read_shadow;
> natural_width cr4_read_shadow;
> - natural_width cr3_target_value0;
> - natural_width cr3_target_value1;
> - natural_width cr3_target_value2;
> - natural_width cr3_target_value3;
> + natural_width dead_space[4]; /* Last remnants of cr3_target_value[0-3]. */
> natural_width exit_qualification;
> natural_width guest_linear_address;
> natural_width guest_cr0;
> diff --git a/arch/x86/kvm/vmx/evmcs.c b/arch/x86/kvm/vmx/evmcs.c
> index 303813423c3e..73f3e07c1852 100644
> --- a/arch/x86/kvm/vmx/evmcs.c
> +++ b/arch/x86/kvm/vmx/evmcs.c
> @@ -160,14 +160,6 @@ const struct evmcs_field vmcs_field_to_evmcs_1[] = {
> HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
> EVMCS1_FIELD(VM_ENTRY_MSR_LOAD_ADDR, vm_entry_msr_load_addr,
> HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
> - EVMCS1_FIELD(CR3_TARGET_VALUE0, cr3_target_value0,
> - HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
> - EVMCS1_FIELD(CR3_TARGET_VALUE1, cr3_target_value1,
> - HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
> - EVMCS1_FIELD(CR3_TARGET_VALUE2, cr3_target_value2,
> - HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
> - EVMCS1_FIELD(CR3_TARGET_VALUE3, cr3_target_value3,
> - HV_VMX_ENLIGHTENED_CLEAN_FIELD_ALL),
>
> /* 32 bit rw */
> EVMCS1_FIELD(TPR_THRESHOLD, tpr_threshold,
> diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
> index aca57d8da400..aeb56b515c5c 100644
> --- a/arch/x86/kvm/vmx/nested.c
> +++ b/arch/x86/kvm/vmx/nested.c
> @@ -1785,10 +1785,6 @@ static int copy_enlightened_to_vmcs12(struct vcpu_vmx *vmx)
> * vmcs12->vm_exit_msr_store_addr = evmcs->vm_exit_msr_store_addr;
> * vmcs12->vm_exit_msr_load_addr = evmcs->vm_exit_msr_load_addr;
> * vmcs12->vm_entry_msr_load_addr = evmcs->vm_entry_msr_load_addr;
> - * vmcs12->cr3_target_value0 = evmcs->cr3_target_value0;
> - * vmcs12->cr3_target_value1 = evmcs->cr3_target_value1;
> - * vmcs12->cr3_target_value2 = evmcs->cr3_target_value2;
> - * vmcs12->cr3_target_value3 = evmcs->cr3_target_value3;
> * vmcs12->page_fault_error_code_mask =
> * evmcs->page_fault_error_code_mask;
> * vmcs12->page_fault_error_code_match =
> @@ -1862,10 +1858,6 @@ static int copy_vmcs12_to_enlightened(struct vcpu_vmx *vmx)
> * evmcs->vm_exit_msr_store_addr = vmcs12->vm_exit_msr_store_addr;
> * evmcs->vm_exit_msr_load_addr = vmcs12->vm_exit_msr_load_addr;
> * evmcs->vm_entry_msr_load_addr = vmcs12->vm_entry_msr_load_addr;
> - * evmcs->cr3_target_value0 = vmcs12->cr3_target_value0;
> - * evmcs->cr3_target_value1 = vmcs12->cr3_target_value1;
> - * evmcs->cr3_target_value2 = vmcs12->cr3_target_value2;
> - * evmcs->cr3_target_value3 = vmcs12->cr3_target_value3;
> * evmcs->tpr_threshold = vmcs12->tpr_threshold;
> * evmcs->virtual_processor_id = vmcs12->virtual_processor_id;
> * evmcs->exception_bitmap = vmcs12->exception_bitmap;
> @@ -5540,15 +5532,6 @@ static bool nested_vmx_exit_handled_cr(struct kvm_vcpu *vcpu,
> return true;
> break;
> case 3:
> - if ((vmcs12->cr3_target_count >= 1 &&
> - vmcs12->cr3_target_value0 == val) ||
> - (vmcs12->cr3_target_count >= 2 &&
> - vmcs12->cr3_target_value1 == val) ||
> - (vmcs12->cr3_target_count >= 3 &&
> - vmcs12->cr3_target_value2 == val) ||
> - (vmcs12->cr3_target_count >= 4 &&
> - vmcs12->cr3_target_value3 == val))
> - return false;
> if (nested_cpu_has(vmcs12, CPU_BASED_CR3_LOAD_EXITING))
> return true;
> break;
> diff --git a/arch/x86/kvm/vmx/vmcs12.c b/arch/x86/kvm/vmx/vmcs12.c
> index 53dfb401316d..c8e51c004f78 100644
> --- a/arch/x86/kvm/vmx/vmcs12.c
> +++ b/arch/x86/kvm/vmx/vmcs12.c
> @@ -115,10 +115,6 @@ const unsigned short vmcs_field_to_offset_table[] = {
> FIELD(CR4_GUEST_HOST_MASK, cr4_guest_host_mask),
> FIELD(CR0_READ_SHADOW, cr0_read_shadow),
> FIELD(CR4_READ_SHADOW, cr4_read_shadow),
> - FIELD(CR3_TARGET_VALUE0, cr3_target_value0),
> - FIELD(CR3_TARGET_VALUE1, cr3_target_value1),
> - FIELD(CR3_TARGET_VALUE2, cr3_target_value2),
> - FIELD(CR3_TARGET_VALUE3, cr3_target_value3),
> FIELD(EXIT_QUALIFICATION, exit_qualification),
> FIELD(GUEST_LINEAR_ADDRESS, guest_linear_address),
> FIELD(GUEST_CR0, guest_cr0),
> diff --git a/arch/x86/kvm/vmx/vmcs12.h b/arch/x86/kvm/vmx/vmcs12.h
> index d0c6df373f67..80232daf00ff 100644
> --- a/arch/x86/kvm/vmx/vmcs12.h
> +++ b/arch/x86/kvm/vmx/vmcs12.h
> @@ -80,10 +80,7 @@ struct __packed vmcs12 {
> natural_width cr4_guest_host_mask;
> natural_width cr0_read_shadow;
> natural_width cr4_read_shadow;
> - natural_width cr3_target_value0;
> - natural_width cr3_target_value1;
> - natural_width cr3_target_value2;
> - natural_width cr3_target_value3;
> + natural_width dead_space[4]; /* Last remnants of cr3_target_value[0-3]. */
> natural_width exit_qualification;
> natural_width guest_linear_address;
> natural_width guest_cr0;
> @@ -263,10 +260,7 @@ static inline void vmx_check_vmcs12_offsets(void)
> CHECK_OFFSET(cr4_guest_host_mask, 352);
> CHECK_OFFSET(cr0_read_shadow, 360);
> CHECK_OFFSET(cr4_read_shadow, 368);
> - CHECK_OFFSET(cr3_target_value0, 376);
> - CHECK_OFFSET(cr3_target_value1, 384);
> - CHECK_OFFSET(cr3_target_value2, 392);
> - CHECK_OFFSET(cr3_target_value3, 400);
> + CHECK_OFFSET(dead_space, 376);
> CHECK_OFFSET(exit_qualification, 408);
> CHECK_OFFSET(guest_linear_address, 416);
> CHECK_OFFSET(guest_cr0, 424);
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index aa1b8cf7c915..1ba7722445cc 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -5711,7 +5711,6 @@ void dump_vmcs(void)
> u32 cpu_based_exec_ctrl, pin_based_exec_ctrl, secondary_exec_control;
> unsigned long cr4;
> u64 efer;
> - int i, n;
>
> if (!dump_invalid_vmcs) {
> pr_warn_ratelimited("set kvm_intel.dump_invalid_vmcs=1 to dump internal KVM state.\n");
> @@ -5848,14 +5847,6 @@ void dump_vmcs(void)
> pr_err("PostedIntrVec = 0x%02x\n", vmcs_read16(POSTED_INTR_NV));
> if ((secondary_exec_control & SECONDARY_EXEC_ENABLE_EPT))
> pr_err("EPT pointer = 0x%016llx\n", vmcs_read64(EPT_POINTER));
> - n = vmcs_read32(CR3_TARGET_COUNT);
> - for (i = 0; i + 1 < n; i += 4)
> - pr_err("CR3 target%u=%016lx target%u=%016lx\n",
> - i, vmcs_readl(CR3_TARGET_VALUE0 + i * 2),
> - i + 1, vmcs_readl(CR3_TARGET_VALUE0 + i * 2 + 2));
> - if (i < n)
> - pr_err("CR3 target%u=%016lx\n",
> - i, vmcs_readl(CR3_TARGET_VALUE0 + i * 2));
> if (secondary_exec_control & SECONDARY_EXEC_PAUSE_LOOP_EXITING)
> pr_err("PLE Gap=%08x Window=%08x\n",
> vmcs_read32(PLE_GAP), vmcs_read32(PLE_WINDOW));
--
Vitaly
Powered by blists - more mailing lists