| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200416113745.GS34509@piout.net>
Date: Thu, 16 Apr 2020 13:37:45 +0200
From: Alexandre Belloni <alexandre.belloni@...tlin.com>
To: Rob Herring <robh@...nel.org>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Krzysztof Kozlowski <krzk@...nel.org>,
Maxime Ripard <mripard@...nel.org>,
Stephen Boyd <sboyd@...nel.org>,
Alexandre Torgue <alexandre.torgue@...com>,
Thierry Reding <thierry.reding@...il.com>,
Sam Ravnborg <sam@...nborg.org>, Vinod Koul <vkoul@...nel.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Guenter Roeck <linux@...ck-us.net>,
Jonathan Cameron <jic23@...nel.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Jacek Anaszewski <jacek.anaszewski@...il.com>,
Pavel Machek <pavel@....cz>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Lee Jones <lee.jones@...aro.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
Heiko Stuebner <heiko@...ech.de>, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Linus Walleij <linus.walleij@...aro.org>,
Fabio Estevam <festevam@...il.com>,
Mark Brown <broonie@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Amit Kucheria <amit.kucheria@...aro.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
linux-arm-kernel@...ts.infradead.org, linux-clk@...r.kernel.org,
dri-devel@...ts.freedesktop.org, linux-i2c@...r.kernel.org,
linux-hwmon@...r.kernel.org, linux-iio@...r.kernel.org,
linux-input@...r.kernel.org, linux-leds@...r.kernel.org,
linux-media@...r.kernel.org, linux-mmc@...r.kernel.org,
linux-mtd@...ts.infradead.org, linux-can@...r.kernel.org,
netdev@...r.kernel.org, linux-pci@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-pwm@...r.kernel.org,
linux-remoteproc@...r.kernel.org, linux-riscv@...ts.infradead.org,
linux-rtc@...r.kernel.org, linux-serial@...r.kernel.org,
alsa-devel@...a-project.org, linux-spi@...r.kernel.org
Subject: Re: [PATCH 2/2] dt-bindings: Remove cases of 'allOf' containing a
'$ref'
On 15/04/2020 19:55:49-0500, Rob Herring wrote:
> json-schema versions draft7 and earlier have a weird behavior in that
> any keywords combined with a '$ref' are ignored (silently). The correct
> form was to put a '$ref' under an 'allOf'. This behavior is now changed
> in the 2019-09 json-schema spec and '$ref' can be mixed with other
> keywords. The json-schema library doesn't yet support this, but the
> tooling now does a fixup for this and either way works.
>
> This has been a constant source of review comments, so let's change this
> treewide so everyone copies the simpler syntax.
>
> Signed-off-by: Rob Herring <robh@...nel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@...tlin.com>
> ---
> .../devicetree/bindings/arm/cpus.yaml | 81 +++---
> .../devicetree/bindings/arm/l2c2x0.yaml | 87 +++---
> .../devicetree/bindings/arm/psci.yaml | 15 +-
> .../bindings/arm/samsung/exynos-chipid.yaml | 5 +-
> .../bus/allwinner,sun50i-a64-de2.yaml | 5 +-
> .../bindings/clock/fixed-factor-clock.yaml | 5 +-
> .../bindings/connector/usb-connector.yaml | 28 +-
> .../bindings/crypto/st,stm32-hash.yaml | 9 +-
> .../allwinner,sun4i-a10-display-engine.yaml | 7 +-
> .../display/allwinner,sun4i-a10-tcon.yaml | 5 +-
> .../bindings/display/panel/panel-common.yaml | 5 +-
> .../devicetree/bindings/dma/dma-common.yaml | 3 +-
> .../devicetree/bindings/dma/ti/k3-udma.yaml | 18 +-
> .../devicetree/bindings/eeprom/at24.yaml | 11 +-
> .../devicetree/bindings/example-schema.yaml | 17 +-
> .../bindings/hwmon/adi,ltc2947.yaml | 32 +--
> .../devicetree/bindings/hwmon/ti,tmp513.yaml | 21 +-
> .../devicetree/bindings/i2c/st,stm32-i2c.yaml | 9 +-
> .../bindings/iio/adc/adi,ad7124.yaml | 5 +-
> .../bindings/iio/adc/lltc,ltc2496.yaml | 3 +-
> .../bindings/iio/adc/microchip,mcp3911.yaml | 7 +-
> .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 31 +-
> .../bindings/iio/light/tsl2772.yaml | 13 +-
> .../bindings/iio/temperature/adi,ltc2983.yaml | 56 ++--
> .../input/allwinner,sun4i-a10-lradc-keys.yaml | 5 +-
> .../devicetree/bindings/input/input.yaml | 9 +-
> .../interrupt-controller/arm,gic-v3.yaml | 39 ++-
> .../devicetree/bindings/iommu/arm,smmu.yaml | 3 +-
> .../devicetree/bindings/leds/common.yaml | 13 +-
> .../devicetree/bindings/leds/leds-gpio.yaml | 3 +-
> .../bindings/leds/rohm,bd71828-leds.yaml | 10 +-
> .../bindings/mailbox/st,stm32-ipcc.yaml | 5 +-
> .../bindings/media/amlogic,gx-vdec.yaml | 6 +-
> .../media/amlogic,meson-gx-ao-cec.yaml | 3 +-
> .../devicetree/bindings/media/rc.yaml | 265 +++++++++---------
> .../bindings/media/renesas,vin.yaml | 7 +-
> .../memory-controllers/exynos-srom.yaml | 14 +-
> .../nvidia,tegra124-emc.yaml | 9 +-
> .../nvidia,tegra124-mc.yaml | 3 +-
> .../nvidia,tegra30-emc.yaml | 9 +-
> .../memory-controllers/nvidia,tegra30-mc.yaml | 3 +-
> .../bindings/mfd/allwinner,sun4i-a10-ts.yaml | 20 +-
> .../bindings/mfd/st,stm32-timers.yaml | 33 ++-
> .../devicetree/bindings/mfd/st,stpmic1.yaml | 9 +-
> .../devicetree/bindings/mfd/syscon.yaml | 5 +-
> .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 4 +-
> .../devicetree/bindings/mmc/cdns,sdhci.yaml | 77 +++--
> .../bindings/mmc/mmc-controller.yaml | 37 ++-
> .../bindings/mmc/rockchip-dw-mshc.yaml | 6 +-
> .../bindings/mmc/synopsys-dw-mshc-common.yaml | 14 +-
> .../mtd/allwinner,sun4i-a10-nand.yaml | 13 +-
> .../bindings/mtd/nand-controller.yaml | 27 +-
> .../bindings/net/can/bosch,m_can.yaml | 59 ++--
> .../bindings/net/ethernet-controller.yaml | 34 +--
> .../devicetree/bindings/net/qca,ar803x.yaml | 17 +-
> .../devicetree/bindings/net/snps,dwmac.yaml | 22 +-
> .../bindings/net/ti,cpsw-switch.yaml | 3 +-
> .../bindings/net/ti,davinci-mdio.yaml | 7 +-
> .../bindings/pci/intel-gw-pcie.yaml | 7 +-
> .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 12 +-
> .../pinctrl/aspeed,ast2400-pinctrl.yaml | 37 ++-
> .../pinctrl/aspeed,ast2500-pinctrl.yaml | 45 ++-
> .../pinctrl/aspeed,ast2600-pinctrl.yaml | 108 ++++---
> .../bindings/pinctrl/fsl,imx8mp-pinctrl.yaml | 31 +-
> .../bindings/pinctrl/intel,lgm-io.yaml | 4 +-
> .../bindings/pinctrl/pinmux-node.yaml | 3 +-
> .../bindings/pinctrl/st,stm32-pinctrl.yaml | 56 ++--
> .../bindings/power/amlogic,meson-ee-pwrc.yaml | 3 +-
> .../devicetree/bindings/pwm/pwm-samsung.yaml | 11 +-
> .../bindings/regulator/gpio-regulator.yaml | 35 ++-
> .../bindings/regulator/mps,mpq7920.yaml | 31 +-
> .../bindings/regulator/regulator.yaml | 5 +-
> .../regulator/rohm,bd71828-regulator.yaml | 34 +--
> .../bindings/regulator/st,stm32-booster.yaml | 3 +-
> .../regulator/st,stm32mp1-pwr-reg.yaml | 3 +-
> .../bindings/remoteproc/st,stm32-rproc.yaml | 9 +-
> .../bindings/reset/intel,rcu-gw.yaml | 3 +-
> .../devicetree/bindings/riscv/cpus.yaml | 20 +-
> .../devicetree/bindings/rtc/st,stm32-rtc.yaml | 9 +-
> .../devicetree/bindings/serial/pl011.yaml | 10 +-
> .../devicetree/bindings/serial/rs485.yaml | 26 +-
> .../bindings/serial/samsung_uart.yaml | 5 +-
> .../bindings/sound/adi,adau7118.yaml | 20 +-
> .../sound/allwinner,sun4i-a10-codec.yaml | 41 ++-
> .../bindings/sound/qcom,wcd934x.yaml | 3 +-
> .../bindings/spi/renesas,sh-msiof.yaml | 42 ++-
> .../bindings/spi/spi-controller.yaml | 14 +-
> .../devicetree/bindings/spi/spi-pl022.yaml | 55 ++--
> .../devicetree/bindings/spi/spi-sifive.yaml | 14 +-
> .../bindings/thermal/qcom-tsens.yaml | 7 +-
> .../bindings/timer/arm,arch_timer_mmio.yaml | 7 +-
> 91 files changed, 881 insertions(+), 1103 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
> index a01814765ddb..3338bae4cee3 100644
> --- a/Documentation/devicetree/bindings/arm/cpus.yaml
> +++ b/Documentation/devicetree/bindings/arm/cpus.yaml
> @@ -171,49 +171,48 @@ properties:
> - qcom,scorpion
>
> enable-method:
> - allOf:
> - - $ref: '/schemas/types.yaml#/definitions/string'
> - - oneOf:
> + $ref: '/schemas/types.yaml#/definitions/string'
> + oneOf:
> # On ARM v8 64-bit this property is required
> - - enum:
> - - psci
> - - spin-table
> + - enum:
> + - psci
> + - spin-table
> # On ARM 32-bit systems this property is optional
> - - enum:
> - - actions,s500-smp
> - - allwinner,sun6i-a31
> - - allwinner,sun8i-a23
> - - allwinner,sun9i-a80-smp
> - - allwinner,sun8i-a83t-smp
> - - amlogic,meson8-smp
> - - amlogic,meson8b-smp
> - - arm,realview-smp
> - - aspeed,ast2600-smp
> - - brcm,bcm11351-cpu-method
> - - brcm,bcm23550
> - - brcm,bcm2836-smp
> - - brcm,bcm63138
> - - brcm,bcm-nsp-smp
> - - brcm,brahma-b15
> - - marvell,armada-375-smp
> - - marvell,armada-380-smp
> - - marvell,armada-390-smp
> - - marvell,armada-xp-smp
> - - marvell,98dx3236-smp
> - - marvell,mmp3-smp
> - - mediatek,mt6589-smp
> - - mediatek,mt81xx-tz-smp
> - - qcom,gcc-msm8660
> - - qcom,kpss-acc-v1
> - - qcom,kpss-acc-v2
> - - renesas,apmu
> - - renesas,r9a06g032-smp
> - - rockchip,rk3036-smp
> - - rockchip,rk3066-smp
> - - socionext,milbeaut-m10v-smp
> - - ste,dbx500-smp
> - - ti,am3352
> - - ti,am4372
> + - enum:
> + - actions,s500-smp
> + - allwinner,sun6i-a31
> + - allwinner,sun8i-a23
> + - allwinner,sun9i-a80-smp
> + - allwinner,sun8i-a83t-smp
> + - amlogic,meson8-smp
> + - amlogic,meson8b-smp
> + - arm,realview-smp
> + - aspeed,ast2600-smp
> + - brcm,bcm11351-cpu-method
> + - brcm,bcm23550
> + - brcm,bcm2836-smp
> + - brcm,bcm63138
> + - brcm,bcm-nsp-smp
> + - brcm,brahma-b15
> + - marvell,armada-375-smp
> + - marvell,armada-380-smp
> + - marvell,armada-390-smp
> + - marvell,armada-xp-smp
> + - marvell,98dx3236-smp
> + - marvell,mmp3-smp
> + - mediatek,mt6589-smp
> + - mediatek,mt81xx-tz-smp
> + - qcom,gcc-msm8660
> + - qcom,kpss-acc-v1
> + - qcom,kpss-acc-v2
> + - renesas,apmu
> + - renesas,r9a06g032-smp
> + - rockchip,rk3036-smp
> + - rockchip,rk3066-smp
> + - socionext,milbeaut-m10v-smp
> + - ste,dbx500-smp
> + - ti,am3352
> + - ti,am4372
>
> cpu-release-addr:
> $ref: '/schemas/types.yaml#/definitions/uint64'
> diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.yaml b/Documentation/devicetree/bindings/arm/l2c2x0.yaml
> index 5d1d50eea26e..6b8f4d4fa580 100644
> --- a/Documentation/devicetree/bindings/arm/l2c2x0.yaml
> +++ b/Documentation/devicetree/bindings/arm/l2c2x0.yaml
> @@ -70,43 +70,39 @@ properties:
> description: Cycles of latency for Data RAM accesses. Specifies 3 cells of
> read, write and setup latencies. Minimum valid values are 1. Controllers
> without setup latency control should use a value of 0.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> - - minItems: 2
> - maxItems: 3
> - items:
> - minimum: 0
> - maximum: 8
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 2
> + maxItems: 3
> + items:
> + minimum: 0
> + maximum: 8
>
> arm,tag-latency:
> description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of
> read, write and setup latencies. Controllers without setup latency control
> should use 0. Controllers without separate read and write Tag RAM latency
> values should only use the first cell.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> - - minItems: 1
> - maxItems: 3
> - items:
> - minimum: 0
> - maximum: 8
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 1
> + maxItems: 3
> + items:
> + minimum: 0
> + maximum: 8
>
> arm,dirty-latency:
> description: Cycles of latency for Dirty RAMs. This is a single cell.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - minimum: 1
> - maximum: 8
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 1
> + maximum: 8
>
> arm,filter-ranges:
> description: <start length> Starting address and length of window to
> filter. Addresses in the filter window are directed to the M1 port. Other
> addresses will go to the M0 port.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> - - items:
> - minItems: 2
> - maxItems: 2
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + items:
> + minItems: 2
> + maxItems: 2
>
> arm,io-coherent:
> description: indicates that the system is operating in an hardware
> @@ -131,36 +127,31 @@ properties:
> arm,double-linefill:
> description: Override double linefill enable setting. Enable if
> non-zero, disable if zero.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 0, 1 ]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1]
>
> arm,double-linefill-incr:
> description: Override double linefill on INCR read. Enable
> if non-zero, disable if zero.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 0, 1 ]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1]
>
> arm,double-linefill-wrap:
> description: Override double linefill on WRAP read. Enable
> if non-zero, disable if zero.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 0, 1 ]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1]
>
> arm,prefetch-drop:
> description: Override prefetch drop enable setting. Enable if non-zero,
> disable if zero.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 0, 1 ]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1]
>
> arm,prefetch-offset:
> description: Override prefetch offset value.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31 ]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31]
>
> arm,shared-override:
> description: The default behavior of the L220 or PL310 cache
> @@ -193,35 +184,31 @@ properties:
> description: |
> Data prefetch. Value: <0> (forcibly disable), <1>
> (forcibly enable), property absent (retain settings set by firmware)
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 0, 1 ]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1]
>
> prefetch-instr:
> description: |
> Instruction prefetch. Value: <0> (forcibly disable),
> <1> (forcibly enable), property absent (retain settings set by
> firmware)
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 0, 1 ]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1]
>
> arm,dynamic-clock-gating:
> description: |
> L2 dynamic clock gating. Value: <0> (forcibly
> disable), <1> (forcibly enable), property absent (OS specific behavior,
> preferably retain firmware settings)
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 0, 1 ]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1]
>
> arm,standby-mode:
> description: L2 standby mode enable. Value <0> (forcibly disable),
> <1> (forcibly enable), property absent (OS specific behavior,
> preferably retain firmware settings)
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 0, 1 ]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1]
>
> arm,early-bresp-disable:
> description: Disable the CA9 optimization Early BRESP (PL310)
> diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml
> index 9247b58c26fc..4f9b361aefd6 100644
> --- a/Documentation/devicetree/bindings/arm/psci.yaml
> +++ b/Documentation/devicetree/bindings/arm/psci.yaml
> @@ -69,13 +69,12 @@ properties:
>
> method:
> description: The method of calling the PSCI firmware.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/string-array
> - - enum:
> - # SMC #0, with the register assignments specified in this binding.
> - - smc
> + $ref: /schemas/types.yaml#/definitions/string-array
> + enum:
> +
> + - smc
> # HVC #0, with the register assignments specified in this binding.
> - - hvc
> + - hvc
>
> cpu_suspend:
> $ref: /schemas/types.yaml#/definitions/uint32
> @@ -107,8 +106,8 @@ properties:
>
> patternProperties:
> "^power-domain-":
> - allOf:
> - - $ref: "../power/power-domain.yaml#"
> + $ref: "../power/power-domain.yaml#"
> +
> type: object
> description: |
> ARM systems can have multiple cores, sometimes in an hierarchical
> diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
> index 0425d333b50d..f99c0c6df21b 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
> +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
> @@ -22,9 +22,8 @@ properties:
> Adaptive Supply Voltage bin selection. This can be used
> to determine the ASV bin of an SoC if respective information
> is missing in the CHIPID registers or in the OTP memory.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 0, 1, 2, 3 ]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3]
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
> index f0b3d30fbb76..0503651cd214 100644
> --- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
> +++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
> @@ -31,12 +31,11 @@ properties:
> maxItems: 1
>
> allwinner,sram:
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/phandle-array
> - - maxItems: 1
> description:
> The SRAM that needs to be claimed to access the display engine
> bus.
> + $ref: /schemas/types.yaml#definitions/phandle-array
> + maxItems: 1
>
> ranges: true
>
> diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
> index b567f8092f8c..f415845b38dd 100644
> --- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
> +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
> @@ -24,9 +24,8 @@ properties:
>
> clock-div:
> description: Fixed divider
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - minimum: 1
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 1
>
> clock-mult:
> description: Fixed multiplier
> diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> index 369c58e22a06..03b92b6f35fa 100644
> --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
> +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> @@ -27,8 +27,8 @@ properties:
> description: Size of the connector, should be specified in case of
> non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible
> connectors.
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/string
> + $ref: /schemas/types.yaml#definitions/string
> +
> enum:
> - mini
> - micro
> @@ -57,8 +57,8 @@ properties:
> power-role:
> description: Determines the power role that the Type C connector will
> support. "dual" refers to Dual Role Port (DRP).
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/string
> + $ref: /schemas/types.yaml#definitions/string
> +
> enum:
> - source
> - sink
> @@ -66,18 +66,18 @@ properties:
>
> try-power-role:
> description: Preferred power role.
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/string
> + $ref: /schemas/types.yaml#definitions/string
> +
> enum:
> - - source
> - - sink
> - - dual
> + - source
> + - sink
> + - dual
>
> data-role:
> description: Data role if Type C connector supports USB data. "dual" refers
> Dual Role Device (DRD).
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/string
> + $ref: /schemas/types.yaml#definitions/string
> +
> enum:
> - host
> - device
> @@ -95,8 +95,7 @@ properties:
> defined in dt-bindings/usb/pd.h.
> minItems: 1
> maxItems: 7
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> + $ref: /schemas/types.yaml#/definitions/uint32-array
>
> sink-pdos:
> description: An array of u32 with each entry providing supported power sink
> @@ -108,8 +107,7 @@ properties:
> in dt-bindings/usb/pd.h.
> minItems: 1
> maxItems: 7
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> + $ref: /schemas/types.yaml#/definitions/uint32-array
>
> op-sink-microwatt:
> description: Sink required operating power in microwatt, if source can't
> diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
> index 57ae1c0b6d18..6dd658f0912c 100644
> --- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
> +++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
> @@ -36,11 +36,10 @@ properties:
>
> dma-maxburst:
> description: Set number of maximum dma burst supported
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - minimum: 0
> - - maximum: 2
> - - default: 0
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 2
> + default: 0
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
> index 944ff2f1cf93..e77523b02fad 100644
> --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
> +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
> @@ -66,10 +66,9 @@ properties:
> - allwinner,sun50i-h6-display-engine
>
> allwinner,pipelines:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/phandle-array
> - - minItems: 1
> - maxItems: 2
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + minItems: 1
> + maxItems: 2
> description: |
> Available display engine frontends (DE 1.0) or mixers (DE
> 2.0/3.0) available.
> diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
> index 87cb77b32ee3..4c15a2644a7c 100644
> --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
> +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
> @@ -71,11 +71,10 @@ properties:
> maxItems: 4
>
> clock-output-names:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/string-array
> - - maxItems: 1
> description:
> Name of the LCD pixel clock created.
> + $ref: /schemas/types.yaml#/definitions/string-array
> + maxItems: 1
>
> dmas:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
> index ed051ba12084..b05573de08f3 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
> @@ -48,9 +48,8 @@ properties:
> rotation:
> description:
> Display rotation in degrees counter clockwise (0,90,180,270)
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 0, 90, 180, 270 ]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 90, 180, 270]
>
> # Display Timings
> panel-timing:
> diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml
> index 02a34ba2b49b..c36592683340 100644
> --- a/Documentation/devicetree/bindings/dma/dma-common.yaml
> +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml
> @@ -31,8 +31,7 @@ properties:
> kernel. i.e. first channel corresponds to LSB.
> The first item in the array is for channels 0-31, the second is for
> channels 32-63, etc.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> items:
> minItems: 1
> # Should be enough
> diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
> index 85056982a242..10b74095935f 100644
> --- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
> +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
> @@ -78,25 +78,21 @@ properties:
>
> ti,sci:
> description: phandle to TI-SCI compatible System controller node
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/phandle
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> ti,sci-dev-id:
> description: TI-SCI device id of UDMAP
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> + $ref: /schemas/types.yaml#/definitions/uint32
>
> ti,ringacc:
> description: phandle to the ring accelerator node
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/phandle
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> ti,sci-rm-range-tchan:
> description: |
> Array of UDMA tchan resource subtypes for resource allocation for this
> host
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> minItems: 1
> # Should be enough
> maxItems: 255
> @@ -105,8 +101,7 @@ properties:
> description: |
> Array of UDMA rchan resource subtypes for resource allocation for this
> host
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> minItems: 1
> # Should be enough
> maxItems: 255
> @@ -115,8 +110,7 @@ properties:
> description: |
> Array of UDMA rflow resource subtypes for resource allocation for this
> host
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> minItems: 1
> # Should be enough
> maxItems: 255
> diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
> index a15787e504f0..de513fe333a7 100644
> --- a/Documentation/devicetree/bindings/eeprom/at24.yaml
> +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
> @@ -118,14 +118,13 @@ properties:
> maxItems: 1
>
> pagesize:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> description:
> The length of the pagesize for writing. Please consult the
> manual of your device, that value varies a lot. A wrong value
> may result in data loss! If not specified, a safety value of
> '1' is used which will be very slow.
> - enum: [ 1, 8, 16, 32, 64, 128, 258 ]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [1, 8, 16, 32, 64, 128, 258]
> default: 1
>
> read-only:
> @@ -148,18 +147,16 @@ properties:
> wp-gpios: true
>
> address-width:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> description:
> Number of address bits.
> + $ref: /schemas/types.yaml#/definitions/uint32
> default: 8
> enum: [ 8, 16 ]
>
> num-addresses:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> description:
> Total number of i2c slave addresses this device takes.
> + $ref: /schemas/types.yaml#/definitions/uint32
> default: 1
> minimum: 1
> maximum: 8
> diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml
> index 62811a1b5058..c9534d2164a2 100644
> --- a/Documentation/devicetree/bindings/example-schema.yaml
> +++ b/Documentation/devicetree/bindings/example-schema.yaml
> @@ -138,12 +138,8 @@ properties:
> # 'description'.
> vendor,int-property:
> description: Vendor specific properties must have a description
> - # 'allOf' is the json-schema way of subclassing a schema. Here the base
> - # type schema is referenced and then additional constraints on the values
> - # are added.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [2, 4, 6, 8, 10]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [2, 4, 6, 8, 10]
>
> vendor,bool-property:
> description: Vendor specific properties must have a description. Boolean
> @@ -154,11 +150,10 @@ properties:
> vendor,string-array-property:
> description: Vendor specific properties should reference a type in the
> core schema.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/string-array
> - - items:
> - - enum: [ foo, bar ]
> - - enum: [ baz, boo ]
> + $ref: /schemas/types.yaml#/definitions/string-array
> + items:
> + - enum: [foo, bar]
> + - enum: [baz, boo]
>
> vendor,property-in-standard-units-microvolt:
> description: Vendor specific properties having a standard unit suffix
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> index 44a63fffb4be..eef614962b10 100644
> --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
> @@ -38,20 +38,18 @@ properties:
> the accumulated values, this entry can also have two items which sets
> energy1/charge1 and energy2/charger2 respectively. Check table 12 of the
> datasheet for more information on the supported options.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> - - minItems: 2
> - maxItems: 2
> - items:
> - enum: [0, 1, 2, 3]
> - default: 0
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 2
> + maxItems: 2
> + items:
> + enum: [0, 1, 2, 3]
> + default: 0
>
> adi,accumulation-deadband-microamp:
> description:
> This property controls the Accumulation Dead band which allows to set the
> level of current below which no accumulation takes place.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> + $ref: /schemas/types.yaml#/definitions/uint32
> maximum: 255
> default: 0
>
> @@ -61,8 +59,7 @@ properties:
> active high, setting it to zero makets it active low. When this property
> is present, the GPIO is automatically configured as output and set to
> control a fan as a function of measured temperature.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> + $ref: /schemas/types.yaml#/definitions/uint32
> enum: [0, 1]
> default: 0
>
> @@ -74,13 +71,12 @@ properties:
> registers. Check table 13 of the datasheet for more information on the
> supported options. This property cannot be used together with
> adi,gpio-out-pol.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> - - minItems: 2
> - maxItems: 2
> - items:
> - enum: [0, 1, 2]
> - default: 0
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 2
> + maxItems: 2
> + items:
> + enum: [0, 1, 2]
> + default: 0
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> index 3f043e943668..90b2fa3f7752 100644
> --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
> @@ -45,16 +45,14 @@ properties:
> The gain value for the PGA function. This is 8, 4, 2 or 1.
> The PGA gain affect the shunt voltage range.
> The range will be equal to: pga-gain * 40mV
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> + $ref: /schemas/types.yaml#/definitions/uint32
> enum: [1, 2, 4, 8]
> default: 8
>
> ti,bus-range-microvolt:
> description: |
> This is the operating range of the bus voltage in microvolt
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> + $ref: /schemas/types.yaml#/definitions/uint32
> enum: [16000000, 32000000]
> default: 32000000
>
> @@ -63,14 +61,13 @@ properties:
> Array of three(TMP513) or two(TMP512) n-Factor value for each remote
> temperature channel.
> See datasheet Table 11 for n-Factor range list and value interpretation.
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/uint32-array
> - - minItems: 2
> - maxItems: 3
> - items:
> - default: 0x00
> - minimum: 0x00
> - maximum: 0xFF
> + $ref: /schemas/types.yaml#definitions/uint32-array
> + minItems: 2
> + maxItems: 3
> + items:
> + default: 0x00
> + minimum: 0x00
> + maximum: 0xFF
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
> index 900ec1ab6a47..96630f225207 100644
> --- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
> @@ -30,11 +30,10 @@ allOf:
> Fast Mode Plus speed is selected by slave.
> Format is phandle to syscfg / register offset within
> syscfg / register bitmask for FMP bit.
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> - - items:
> - minItems: 3
> - maxItems: 3
> + $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + items:
> + minItems: 3
> + maxItems: 3
>
> - if:
> properties:
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
> index 97087a45ce54..deb34deff0e8 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
> @@ -83,9 +83,8 @@ patternProperties:
> 1: REFIN2(+)/REFIN2(−).
> 3: AVDD
> If this field is left empty, internal reference is selected.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [0, 1, 3]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 3]
>
> diff-channels:
> description: see Documentation/devicetree/bindings/iio/adc/adc.txt
> diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
> index 97f521d654ea..6a991e9f78e2 100644
> --- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
> @@ -18,8 +18,7 @@ properties:
>
> vref-supply:
> description: phandle to an external regulator providing the reference voltage
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/phandle
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> reg:
> description: spi chipselect number according to the usual spi bindings
> diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> index 8ffeceb6abae..95ab285f4eba 100644
> --- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> @@ -38,10 +38,9 @@ properties:
>
> microchip,device-addr:
> description: Device address when multiple MCP3911 chips are present on the same SPI bus.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [0, 1, 2, 3]
> - - default: 0
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3]
> + default: 0
>
> vref-supply:
> description: |
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> index b1627441a0b2..d69ca492d020 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> @@ -95,16 +95,14 @@ patternProperties:
> On stm32h7 and stm32mp1:
> - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7.
> - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> - - items:
> - minimum: 0
> - maximum: 7
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + items:
> + minimum: 0
> + maximum: 7
>
> st,adc-channel-names:
> description: List of single-ended channel names.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/string-array
> + $ref: /schemas/types.yaml#/definitions/string-array
>
> st,filter-order:
> description: |
> @@ -112,11 +110,10 @@ patternProperties:
> - 0: FastSinC
> - [1-5]: order 1 to 5.
> For audio purpose it is recommended to use order 3 to 5.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - items:
> - minimum: 0
> - maximum: 5
> + $ref: /schemas/types.yaml#/definitions/uint32
> + items:
> + minimum: 0
> + maximum: 5
>
> "#io-channel-cells":
> const: 1
> @@ -129,9 +126,8 @@ patternProperties:
> - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
> - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
> items:
> - enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> + enum: [SPI_R, SPI_F, MANCH_R, MANCH_F]
> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
>
> st,adc-channel-clk-src:
> description: |
> @@ -141,9 +137,8 @@ patternProperties:
> - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
> - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
> items:
> - enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> + enum: [CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R]
> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
>
> st,adc-alt-channel:
> description:
> diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
> index e8f7d1ada57b..d81229857944 100644
> --- a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
> +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
> @@ -33,13 +33,12 @@ properties:
>
> amstaos,proximity-diodes:
> description: Proximity diodes to enable
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> - - minItems: 1
> - maxItems: 2
> - items:
> - minimum: 0
> - maximum: 1
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 1
> + maxItems: 2
> + items:
> + minimum: 0
> + maximum: 1
>
> interrupts:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> index 8fb46de6641d..9480ede59c37 100644
> --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
> @@ -42,10 +42,9 @@ properties:
> 0 - 50/60Hz rejection
> 1 - 60Hz rejection
> 2 - 50Hz rejection
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - minimum: 0
> - maximum: 2
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 2
>
> '#address-cells':
> const: 1
> @@ -91,8 +90,7 @@ patternProperties:
> 7 - Type T Thermocouple
> 8 - Type B Thermocouple
> 9 - Custom Thermocouple
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> + $ref: /schemas/types.yaml#/definitions/uint32
> minimum: 1
> maximum: 9
>
> @@ -121,8 +119,7 @@ patternProperties:
> more details look at table 69 and 70.
> Note should be signed, but dtc doesn't currently maintain the
> sign.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint64-matrix
> + $ref: /schemas/types.yaml#/definitions/uint64-matrix
> minItems: 3
> maxItems: 64
> items:
> @@ -138,8 +135,7 @@ patternProperties:
> properties:
> adi,sensor-type:
> description: Identifies the sensor as a diode.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> + $ref: /schemas/types.yaml#/definitions/uint32
> const: 28
>
> adi,single-ended:
> @@ -196,8 +192,7 @@ patternProperties:
> 16 - RTD PT-1000 (0.00375)
> 17 - RTD NI-120
> 18 - RTD Custom
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> + $ref: /schemas/types.yaml#/definitions/uint32
> minimum: 10
> maximum: 18
>
> @@ -210,9 +205,8 @@ patternProperties:
> description:
> Identifies the number of wires used by the RTD. Setting this
> property to 5 means 4 wires with Kelvin Rsense.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [2, 3, 4, 5]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [2, 3, 4, 5]
>
> adi,rsense-share:
> description:
> @@ -237,18 +231,16 @@ patternProperties:
> description:
> This property set the RTD curve used and the corresponding
> Callendar-VanDusen constants. Look at table 30 of the datasheet.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - minimum: 0
> - maximum: 3
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 3
>
> adi,custom-rtd:
> description:
> This is a table, where each entry should be a pair of
> resistance(ohm)-temperature(K). The entries added here are in uohm
> and uK. For more details values look at table 74 and 75.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint64-matrix
> + $ref: /schemas/types.yaml#/definitions/uint64-matrix
> items:
> minItems: 3
> maxItems: 64
> @@ -280,8 +272,7 @@ patternProperties:
> 25 - Thermistor Spectrum 1003k 1kohm
> 26 - Thermistor Custom Steinhart-Hart
> 27 - Custom Thermistor
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> + $ref: /schemas/types.yaml#/definitions/uint32
> minimum: 19
> maximum: 27
>
> @@ -314,10 +305,9 @@ patternProperties:
> This property controls the magnitude of the excitation current
> applied to the thermistor. Value 0 set's the sensor in auto-range
> mode.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
> - 250000, 500000, 1000000]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,
> + 500000, 1000000]
>
> adi,custom-thermistor:
> description:
> @@ -325,8 +315,7 @@ patternProperties:
> resistance(ohm)-temperature(K). The entries added here are in uohm
> and uK only for custom thermistors. For more details look at table
> 78 and 79.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint64-matrix
> + $ref: /schemas/types.yaml#/definitions/uint64-matrix
> minItems: 3
> maxItems: 64
> items:
> @@ -339,8 +328,7 @@ patternProperties:
> be programmed into the device memory using this property. For
> Steinhart sensors the coefficients are given in the raw
> format. Look at table 82 for more information.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> items:
> minItems: 6
> maxItems: 6
> @@ -358,8 +346,7 @@ patternProperties:
> properties:
> adi,sensor-type:
> description: Identifies the sensor as a direct adc.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> + $ref: /schemas/types.yaml#/definitions/uint32
> const: 30
>
> adi,single-ended:
> @@ -379,8 +366,7 @@ patternProperties:
>
> adi,sensor-type:
> description: Identifies the sensor as a rsense.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> + $ref: /schemas/types.yaml#/definitions/uint32
> const: 29
>
> adi,rsense-val-milli-ohms:
> diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
> index 512a6af5aa42..cffd02028d02 100644
> --- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
> +++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
> @@ -42,9 +42,8 @@ patternProperties:
> description: Keycode to emit
>
> channel:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [0, 1]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1]
> description: ADC Channel this key is attached to
>
> voltage:
> diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml
> index 6d519046b3af..8edcb3c31270 100644
> --- a/Documentation/devicetree/bindings/input/input.yaml
> +++ b/Documentation/devicetree/bindings/input/input.yaml
> @@ -18,11 +18,10 @@ properties:
> description:
> Specifies an array of numeric keycode values to be used for reporting
> button presses.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> - - items:
> - minimum: 0
> - maximum: 0xff
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + items:
> + minimum: 0
> + maximum: 0xff
>
> poll-interval:
> description: Poll interval time in milliseconds.
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
> index 66aacd106503..1ecd1831cf02 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
> +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
> @@ -91,18 +91,16 @@ properties:
> description:
> If using padding pages, specifies the stride of consecutive
> redistributors. Must be a multiple of 64kB.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint64
> - - multipleOf: 0x10000
> - exclusiveMinimum: 0
> + $ref: /schemas/types.yaml#/definitions/uint64
> + multipleOf: 0x10000
> + exclusiveMinimum: 0
>
> "#redistributor-regions":
> description:
> The number of independent contiguous regions occupied by the
> redistributors. Required if more than one such region is present.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - maximum: 4096 # Should be enough?
> + $ref: /schemas/types.yaml#/definitions/uint32
> + maximum: 4096
>
> msi-controller:
> description:
> @@ -114,22 +112,20 @@ properties:
> A list of pairs <intid span>, where "intid" is the first SPI of a range
> that can be used an MBI, and "span" the size of that range. Multiple
> ranges can be provided.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-matrix
> - - items:
> - minItems: 2
> - maxItems: 2
> + $ref: /schemas/types.yaml#/definitions/uint32-matrix
> + items:
> + minItems: 2
> + maxItems: 2
>
> mbi-alias:
> description:
> Address property. Base address of an alias of the GICD region containing
> only the {SET,CLR}SPI registers to be used if isolation is required,
> and if supported by the HW.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> - - items:
> - minItems: 1
> - maxItems: 2
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + items:
> + minItems: 1
> + maxItems: 2
>
> ppi-partitions:
> type: object
> @@ -188,11 +184,10 @@ patternProperties:
> description:
> (u32, u32) tuple describing the untranslated
> address and size of the pre-ITS window.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> - - items:
> - minItems: 2
> - maxItems: 2
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + items:
> + minItems: 2
> + maxItems: 2
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
> index 6515dbe47508..3aa554878b90 100644
> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
> @@ -56,8 +56,7 @@ properties:
>
> '#global-interrupts':
> description: The number of global interrupts exposed by the device.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> + $ref: /schemas/types.yaml#/definitions/uint32
> minimum: 0
> maximum: 260 # 2 secure, 2 non-secure, and up to 256 perf counters
>
> diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
> index 4c270fde4567..a2a541bca73c 100644
> --- a/Documentation/devicetree/bindings/leds/common.yaml
> +++ b/Documentation/devicetree/bindings/leds/common.yaml
> @@ -41,8 +41,7 @@ properties:
> Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from
> the header include/dt-bindings/leds/common.h. If there is no matching
> LED_COLOR_ID available, add a new one.
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/uint32
> + $ref: /schemas/types.yaml#definitions/uint32
> minimum: 0
> maximum: 8
>
> @@ -67,8 +66,7 @@ properties:
> produced where the LED momentarily turns off (or on). The "keep" setting
> will keep the LED at whatever its current state is, without producing a
> glitch.
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/string
> + $ref: /schemas/types.yaml#definitions/string
> enum:
> - on
> - off
> @@ -79,8 +77,8 @@ properties:
> description:
> This parameter, if present, is a string defining the trigger assigned to
> the LED.
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/string
> + $ref: /schemas/types.yaml#definitions/string
> +
> enum:
> # LED will act as a back-light, controlled by the framebuffer system
> - backlight
> @@ -111,8 +109,7 @@ properties:
> brightness and duration (in ms). The exact format is
> described in:
> Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/uint32-matrix
> + $ref: /schemas/types.yaml#definitions/uint32-matrix
> items:
> minItems: 2
> maxItems: 2
> diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.yaml b/Documentation/devicetree/bindings/leds/leds-gpio.yaml
> index 0e75b185dd19..7ad2baeda0b0 100644
> --- a/Documentation/devicetree/bindings/leds/leds-gpio.yaml
> +++ b/Documentation/devicetree/bindings/leds/leds-gpio.yaml
> @@ -24,8 +24,7 @@ patternProperties:
> "(^led-[0-9a-f]$|led)":
> type: object
>
> - allOf:
> - - $ref: common.yaml#
> + $ref: common.yaml#
>
> properties:
> gpios:
> diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
> index 90edf9d33b33..aa715edd93b0 100644
> --- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
> +++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
> @@ -34,11 +34,11 @@ patternProperties:
> #- $ref: "common.yaml#"
> rohm,led-compatible:
> description: LED identification string
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/string"
> - - enum:
> - - bd71828-ambled
> - - bd71828-grnled
> + $ref: "/schemas/types.yaml#/definitions/string"
> + enum:
> +
> + - bd71828-ambled
> + - bd71828-grnled
> function:
> description:
> Purpose of LED as defined in dt-bindings/leds/common.h
> diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
> index db851541d619..3b7ab61a144f 100644
> --- a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
> +++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
> @@ -49,9 +49,8 @@ properties:
>
> st,proc-id:
> description: Processor id using the mailbox (0 or 1)
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 0, 1 ]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1]
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> index 5a1da4029c37..b902495d278b 100644
> --- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> +++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
> @@ -77,13 +77,11 @@ properties:
>
> amlogic,ao-sysctrl:
> description: should point to the AOBUS sysctrl node
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/phandle
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> amlogic,canvas:
> description: should point to a canvas provider node
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/phandle
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> allOf:
> - if:
> diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
> index 95ffa8bc0533..c08e2ddf292a 100644
> --- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
> +++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
> @@ -35,8 +35,7 @@ properties:
>
> hdmi-phandle:
> description: phandle to the HDMI controller
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/phandle
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> allOf:
> - if:
> diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml
> index b27c9385d490..ded2ac43237d 100644
> --- a/Documentation/devicetree/bindings/media/rc.yaml
> +++ b/Documentation/devicetree/bindings/media/rc.yaml
> @@ -18,136 +18,135 @@ properties:
> description:
> Specifies the scancode/key mapping table defined in-kernel for
> the remote controller.
> - allOf:
> - - $ref: '/schemas/types.yaml#/definitions/string'
> - - enum:
> - - rc-adstech-dvb-t-pci
> - - rc-alink-dtu-m
> - - rc-anysee
> - - rc-apac-viewcomp
> - - rc-astrometa-t2hybrid
> - - rc-asus-pc39
> - - rc-asus-ps3-100
> - - rc-ati-tv-wonder-hd-600
> - - rc-ati-x10
> - - rc-avermedia
> - - rc-avermedia-a16d
> - - rc-avermedia-cardbus
> - - rc-avermedia-dvbt
> - - rc-avermedia-m135a
> - - rc-avermedia-m733a-rm-k6
> - - rc-avermedia-rm-ks
> - - rc-avertv-303
> - - rc-azurewave-ad-tu700
> - - rc-beelink-gs1
> - - rc-behold
> - - rc-behold-columbus
> - - rc-budget-ci-old
> - - rc-cec
> - - rc-cinergy
> - - rc-cinergy-1400
> - - rc-d680-dmb
> - - rc-delock-61959
> - - rc-dib0700-nec
> - - rc-dib0700-rc5
> - - rc-digitalnow-tinytwin
> - - rc-digittrade
> - - rc-dm1105-nec
> - - rc-dntv-live-dvb-t
> - - rc-dntv-live-dvbt-pro
> - - rc-dtt200u
> - - rc-dvbsky
> - - rc-dvico-mce
> - - rc-dvico-portable
> - - rc-em-terratec
> - - rc-empty
> - - rc-encore-enltv
> - - rc-encore-enltv-fm53
> - - rc-encore-enltv2
> - - rc-evga-indtube
> - - rc-eztv
> - - rc-flydvb
> - - rc-flyvideo
> - - rc-fusionhdtv-mce
> - - rc-gadmei-rm008z
> - - rc-geekbox
> - - rc-genius-tvgo-a11mce
> - - rc-gotview7135
> - - rc-hauppauge
> - - rc-hisi-poplar
> - - rc-hisi-tv-demo
> - - rc-imon-mce
> - - rc-imon-pad
> - - rc-imon-rsc
> - - rc-iodata-bctv7e
> - - rc-it913x-v1
> - - rc-it913x-v2
> - - rc-kaiomy
> - - rc-khadas
> - - rc-kworld-315u
> - - rc-kworld-pc150u
> - - rc-kworld-plus-tv-analog
> - - rc-leadtek-y04g0051
> - - rc-lme2510
> - - rc-manli
> - - rc-medion-x10
> - - rc-medion-x10-digitainer
> - - rc-medion-x10-or2x
> - - rc-msi-digivox-ii
> - - rc-msi-digivox-iii
> - - rc-msi-tvanywhere
> - - rc-msi-tvanywhere-plus
> - - rc-nebula
> - - rc-nec-terratec-cinergy-xs
> - - rc-norwood
> - - rc-npgtech
> - - rc-odroid
> - - rc-pctv-sedna
> - - rc-pinnacle-color
> - - rc-pinnacle-grey
> - - rc-pinnacle-pctv-hd
> - - rc-pixelview
> - - rc-pixelview-002t
> - - rc-pixelview-mk12
> - - rc-pixelview-new
> - - rc-powercolor-real-angel
> - - rc-proteus-2309
> - - rc-purpletv
> - - rc-pv951
> - - rc-rc5-tv
> - - rc-rc6-mce
> - - rc-real-audio-220-32-keys
> - - rc-reddo
> - - rc-snapstream-firefly
> - - rc-streamzap
> - - rc-su3000
> - - rc-tango
> - - rc-tanix-tx3mini
> - - rc-tanix-tx5max
> - - rc-tbs-nec
> - - rc-technisat-ts35
> - - rc-technisat-usb2
> - - rc-terratec-cinergy-c-pci
> - - rc-terratec-cinergy-s2-hd
> - - rc-terratec-cinergy-xs
> - - rc-terratec-slim
> - - rc-terratec-slim-2
> - - rc-tevii-nec
> - - rc-tivo
> - - rc-total-media-in-hand
> - - rc-total-media-in-hand-02
> - - rc-trekstor
> - - rc-tt-1500
> - - rc-twinhan-dtv-cab-ci
> - - rc-twinhan1027
> - - rc-videomate-k100
> - - rc-videomate-s350
> - - rc-videomate-tv-pvr
> - - rc-videostrong-kii-pro
> - - rc-wetek-hub
> - - rc-wetek-play2
> - - rc-winfast
> - - rc-winfast-usbii-deluxe
> - - rc-x96max
> - - rc-xbox-dvd
> - - rc-zx-irdec
> + $ref: '/schemas/types.yaml#/definitions/string'
> + enum:
> + - rc-adstech-dvb-t-pci
> + - rc-alink-dtu-m
> + - rc-anysee
> + - rc-apac-viewcomp
> + - rc-astrometa-t2hybrid
> + - rc-asus-pc39
> + - rc-asus-ps3-100
> + - rc-ati-tv-wonder-hd-600
> + - rc-ati-x10
> + - rc-avermedia
> + - rc-avermedia-a16d
> + - rc-avermedia-cardbus
> + - rc-avermedia-dvbt
> + - rc-avermedia-m135a
> + - rc-avermedia-m733a-rm-k6
> + - rc-avermedia-rm-ks
> + - rc-avertv-303
> + - rc-azurewave-ad-tu700
> + - rc-beelink-gs1
> + - rc-behold
> + - rc-behold-columbus
> + - rc-budget-ci-old
> + - rc-cec
> + - rc-cinergy
> + - rc-cinergy-1400
> + - rc-d680-dmb
> + - rc-delock-61959
> + - rc-dib0700-nec
> + - rc-dib0700-rc5
> + - rc-digitalnow-tinytwin
> + - rc-digittrade
> + - rc-dm1105-nec
> + - rc-dntv-live-dvb-t
> + - rc-dntv-live-dvbt-pro
> + - rc-dtt200u
> + - rc-dvbsky
> + - rc-dvico-mce
> + - rc-dvico-portable
> + - rc-em-terratec
> + - rc-empty
> + - rc-encore-enltv
> + - rc-encore-enltv-fm53
> + - rc-encore-enltv2
> + - rc-evga-indtube
> + - rc-eztv
> + - rc-flydvb
> + - rc-flyvideo
> + - rc-fusionhdtv-mce
> + - rc-gadmei-rm008z
> + - rc-geekbox
> + - rc-genius-tvgo-a11mce
> + - rc-gotview7135
> + - rc-hauppauge
> + - rc-hisi-poplar
> + - rc-hisi-tv-demo
> + - rc-imon-mce
> + - rc-imon-pad
> + - rc-imon-rsc
> + - rc-iodata-bctv7e
> + - rc-it913x-v1
> + - rc-it913x-v2
> + - rc-kaiomy
> + - rc-khadas
> + - rc-kworld-315u
> + - rc-kworld-pc150u
> + - rc-kworld-plus-tv-analog
> + - rc-leadtek-y04g0051
> + - rc-lme2510
> + - rc-manli
> + - rc-medion-x10
> + - rc-medion-x10-digitainer
> + - rc-medion-x10-or2x
> + - rc-msi-digivox-ii
> + - rc-msi-digivox-iii
> + - rc-msi-tvanywhere
> + - rc-msi-tvanywhere-plus
> + - rc-nebula
> + - rc-nec-terratec-cinergy-xs
> + - rc-norwood
> + - rc-npgtech
> + - rc-odroid
> + - rc-pctv-sedna
> + - rc-pinnacle-color
> + - rc-pinnacle-grey
> + - rc-pinnacle-pctv-hd
> + - rc-pixelview
> + - rc-pixelview-002t
> + - rc-pixelview-mk12
> + - rc-pixelview-new
> + - rc-powercolor-real-angel
> + - rc-proteus-2309
> + - rc-purpletv
> + - rc-pv951
> + - rc-rc5-tv
> + - rc-rc6-mce
> + - rc-real-audio-220-32-keys
> + - rc-reddo
> + - rc-snapstream-firefly
> + - rc-streamzap
> + - rc-su3000
> + - rc-tango
> + - rc-tanix-tx3mini
> + - rc-tanix-tx5max
> + - rc-tbs-nec
> + - rc-technisat-ts35
> + - rc-technisat-usb2
> + - rc-terratec-cinergy-c-pci
> + - rc-terratec-cinergy-s2-hd
> + - rc-terratec-cinergy-xs
> + - rc-terratec-slim
> + - rc-terratec-slim-2
> + - rc-tevii-nec
> + - rc-tivo
> + - rc-total-media-in-hand
> + - rc-total-media-in-hand-02
> + - rc-trekstor
> + - rc-tt-1500
> + - rc-twinhan-dtv-cab-ci
> + - rc-twinhan1027
> + - rc-videomate-k100
> + - rc-videomate-s350
> + - rc-videomate-tv-pvr
> + - rc-videostrong-kii-pro
> + - rc-wetek-hub
> + - rc-wetek-play2
> + - rc-winfast
> + - rc-winfast-usbii-deluxe
> + - rc-x96max
> + - rc-xbox-dvd
> + - rc-zx-irdec
> diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
> index ecc09f1124d4..6d473cdcb16a 100644
> --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
> @@ -116,10 +116,9 @@ properties:
> #The per-board settings for Gen3 and RZ/G2 platforms:
> renesas,id:
> description: VIN channel number
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - minimum: 0
> - - maximum: 15
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 15
>
> ports:
> type: object
> diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
> index cdfe3f7f0ea9..0dc008e816e2 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
> @@ -51,11 +51,10 @@ patternProperties:
> maxItems: 1
>
> reg-io-width:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [1, 2]
> description:
> Data width in bytes (1 or 2). If omitted, default of 1 is used.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [1, 2]
>
> samsung,srom-page-mode:
> description:
> @@ -64,11 +63,10 @@ patternProperties:
> type: boolean
>
> samsung,srom-timing:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> - - items:
> - minItems: 6
> - maxItems: 6
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + items:
> + minItems: 6
> + maxItems: 6
> description: |
> Array of 6 integers, specifying bank timings in the following order:
> Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
> diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
> index 3e0a8a92d652..a3b36dea88b6 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
> @@ -73,10 +73,9 @@ patternProperties:
> timings
>
> nvidia,emc-auto-cal-interval:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> description:
> pad calibration interval in microseconds
> + $ref: /schemas/types.yaml#/definitions/uint32
> minimum: 0
> maximum: 2097151
>
> @@ -136,11 +135,10 @@ patternProperties:
> value of the EMC_XM2DQSPADCTRL2 register for this set of timings
>
> nvidia,emc-zcal-cnt-long:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> description:
> number of EMC clocks to wait before issuing any commands after
> clock change
> + $ref: /schemas/types.yaml#/definitions/uint32
> minimum: 0
> maximum: 1023
>
> @@ -150,12 +148,11 @@ patternProperties:
> value of the EMC_ZCAL_INTERVAL register for this set of timings
>
> nvidia,emc-configuration:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> description:
> EMC timing characterization data. These are the registers (see
> section "15.6.2 EMC Registers" in the TRM) whose values need to
> be specified, according to the board documentation.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> items:
> - description: EMC_RC
> - description: EMC_RFC
> diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml
> index 22a94b6fdbde..30d9fb193d7f 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml
> @@ -60,8 +60,7 @@ patternProperties:
> maximum: 1066000000
>
> nvidia,emem-configuration:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> description: |
> Values to be written to the EMEM register block. See section
> "15.6.1 MC Registers" in the TRM.
> diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml
> index e4135bac6957..112bae2fcbbd 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml
> @@ -56,10 +56,9 @@ patternProperties:
> maximum: 900000000
>
> nvidia,emc-auto-cal-interval:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> description:
> Pad calibration interval in microseconds.
> + $ref: /schemas/types.yaml#/definitions/uint32
> minimum: 0
> maximum: 2097151
>
> @@ -79,11 +78,10 @@ patternProperties:
> Mode Register 0.
>
> nvidia,emc-zcal-cnt-long:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> description:
> Number of EMC clocks to wait before issuing any commands after
> sending ZCAL_MRW_CMD.
> + $ref: /schemas/types.yaml#/definitions/uint32
> minimum: 0
> maximum: 1023
>
> @@ -98,12 +96,11 @@ patternProperties:
> FBIO "read" FIFO periodic resetting enabled.
>
> nvidia,emc-configuration:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> description:
> EMC timing characterization data. These are the registers
> (see section "18.13.2 EMC Registers" in the TRM) whose values
> need to be specified, according to the board documentation.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> items:
> - description: EMC_RC
> - description: EMC_RFC
> diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml
> index 4b9196c83291..84fd57bcf0dc 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml
> @@ -77,8 +77,7 @@ patternProperties:
> maximum: 900000000
>
> nvidia,emem-configuration:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> description: |
> Values to be written to the EMEM register block. See section
> "18.13.1 MC Registers" in the TRM.
> diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
> index 39afacc447b2..f591332fc462 100644
> --- a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
> +++ b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
> @@ -31,19 +31,19 @@ properties:
> description: A touchscreen is attached to the controller
>
> allwinner,tp-sensitive-adjust:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - minimum: 0
> - maximum: 15
> - default: 15
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 15
> + default: 15
> +
> description: Sensitivity of pen down detection
>
> allwinner,filter-type:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - minimum: 0
> - maximum: 3
> - default: 1
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 3
> + default: 1
> +
> description: |
> Select median and averaging filter. Sample used for median /
> averaging filter:
> diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
> index 4acda7ce3b44..f212fc6e1661 100644
> --- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
> +++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
> @@ -67,23 +67,22 @@ properties:
> description:
> One or two <index level filter> to describe break input
> configurations.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-matrix
> - - items:
> - items:
> - - description: |
> - "index" indicates on which break input (0 or 1) the
> - configuration should be applied.
> - enum: [ 0 , 1]
> - - description: |
> - "level" gives the active level (0=low or 1=high) of the
> - input signal for this configuration
> - enum: [ 0, 1 ]
> - - description: |
> - "filter" gives the filtering value (up to 15) to be applied.
> - maximum: 15
> - minItems: 1
> - maxItems: 2
> + $ref: /schemas/types.yaml#/definitions/uint32-matrix
> + items:
> + items:
> + - description: |
> + "index" indicates on which break input (0 or 1) the
> + configuration should be applied.
> + enum: [0, 1]
> + - description: |
> + "level" gives the active level (0=low or 1=high) of the
> + input signal for this configuration
> + enum: [0, 1]
> + - description: |
> + "filter" gives the filtering value (up to 15) to be applied.
> + maximum: 15
> + minItems: 1
> + maxItems: 2
>
> required:
> - "#pwm-cells"
> diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
> index d9ad9260e348..a10dceae9bc5 100644
> --- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
> +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
> @@ -29,8 +29,7 @@ properties:
> onkey:
> type: object
>
> - allOf:
> - - $ref: ../input/input.yaml
> + $ref: ../input/input.yaml
>
> properties:
> compatible:
> @@ -68,8 +67,7 @@ properties:
> watchdog:
> type: object
>
> - allOf:
> - - $ref: ../watchdog/watchdog.yaml
> + $ref: ../watchdog/watchdog.yaml
>
> properties:
> compatible:
> @@ -190,8 +188,7 @@ properties:
> description: STPMIC1 voltage regulators supplies
>
> "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$":
> - allOf:
> - - $ref: ../regulator/regulator.yaml
> + $ref: ../regulator/regulator.yaml
>
> "^ldo[1-2,5-6]$":
> type: object
> diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
> index 7a39486b215a..19bdaf781853 100644
> --- a/Documentation/devicetree/bindings/mfd/syscon.yaml
> +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
> @@ -52,9 +52,8 @@ properties:
> description: |
> The size (in bytes) of the IO accesses that should be performed
> on the device.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 1, 2, 4, 8 ]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [1, 2, 4, 8]
>
> hwlocks:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> index 200de9396036..987b287f3bff 100644
> --- a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> @@ -41,8 +41,8 @@ properties:
> patternProperties:
> "^sdhci@[0-9a-f]+$":
> type: object
> - allOf:
> - - $ref: mmc-controller.yaml
> + $ref: mmc-controller.yaml
> +
> properties:
> compatible:
> enum:
> diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
> index d43a0c557a44..d93f7794a85f 100644
> --- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
> +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
> @@ -36,91 +36,80 @@ properties:
>
> cdns,phy-input-delay-sd-highspeed:
> description: Value of the delay in the input path for SD high-speed timing
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - - maximum: 0x1f
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 0x1f
>
> cdns,phy-input-delay-legacy:
> description: Value of the delay in the input path for legacy timing
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - - maximum: 0x1f
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 0x1f
>
> cdns,phy-input-delay-sd-uhs-sdr12:
> description: Value of the delay in the input path for SD UHS SDR12 timing
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - - maximum: 0x1f
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 0x1f
>
> cdns,phy-input-delay-sd-uhs-sdr25:
> description: Value of the delay in the input path for SD UHS SDR25 timing
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - - maximum: 0x1f
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 0x1f
>
> cdns,phy-input-delay-sd-uhs-sdr50:
> description: Value of the delay in the input path for SD UHS SDR50 timing
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - - maximum: 0x1f
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 0x1f
>
> cdns,phy-input-delay-sd-uhs-ddr50:
> description: Value of the delay in the input path for SD UHS DDR50 timing
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - - maximum: 0x1f
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 0x1f
>
> cdns,phy-input-delay-mmc-highspeed:
> description: Value of the delay in the input path for MMC high-speed timing
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - - maximum: 0x1f
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 0x1f
>
> cdns,phy-input-delay-mmc-ddr:
> description: Value of the delay in the input path for eMMC high-speed DDR timing
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - - maximum: 0x1f
>
> # PHY DLL clock delays:
> # Each delay property represents the fraction of the clock period.
> # The approximate delay value will be
> # (<delay property value>/128)*sdmclk_clock_period.
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 0x1f
>
> cdns,phy-dll-delay-sdclk:
> description: |
> Value of the delay introduced on the sdclk output for all modes except
> HS200, HS400 and HS400_ES.
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - - maximum: 0x7f
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 0x7f
>
> cdns,phy-dll-delay-sdclk-hsmmc:
> description: |
> Value of the delay introduced on the sdclk output for HS200, HS400 and
> HS400_ES speed modes.
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - - maximum: 0x7f
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 0x7f
>
> cdns,phy-dll-delay-strobe:
> description: |
> Value of the delay introduced on the dat_strobe input used in
> HS400 / HS400_ES speed modes.
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - - maximum: 0x7f
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 0x7f
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> index acc9f10871d4..4931fab34d81 100644
> --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
> @@ -76,20 +76,18 @@ properties:
> # Other properties
>
> bus-width:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [1, 4, 8]
> - default: 1
> description:
> Number of data lines.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [1, 4, 8]
> + default: 1
>
> max-frequency:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - minimum: 400000
> - - maximum: 200000000
> description:
> Maximum operating frequency of the bus.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 400000
> + maximum: 200000000
>
> disable-wp:
> $ref: /schemas/types.yaml#/definitions/flag
> @@ -212,13 +210,12 @@ properties:
> eMMC HS400 enhanced strobe mode is supported
>
> dsr:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - minimum: 0
> - - maximum: 0xffff
> description:
> Value the card Driver Stage Register (DSR) should be programmed
> with.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 0xffff
>
> no-sdio:
> $ref: /schemas/types.yaml#/definitions/flag
> @@ -238,25 +235,23 @@ properties:
> initialization.
>
> fixed-emmc-driver-type:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - minimum: 0
> - - maximum: 4
> description:
> For non-removable eMMC, enforce this driver type. The value is
> the driver type as specified in the eMMC specification (table
> 206 in spec version 5.1)
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 4
>
> post-power-on-delay-ms:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - default: 10
> description:
> It was invented for MMC pwrseq-simple which could be referred to
> mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay
> waiting for I/O signalling and card power supply to be stable,
> regardless of whether pwrseq-simple is used. Default to 10ms if
> no available.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 10
>
> supports-cqe:
> $ref: /schemas/types.yaml#/definitions/flag
> @@ -333,8 +328,8 @@ patternProperties:
> - reg
>
> "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$":
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> +
> minItems: 2
> maxItems: 2
> items:
> diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
> index 4ee3ed6efab4..42d44cbf962f 100644
> --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
> +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
> @@ -76,8 +76,7 @@ properties:
> high speed modes.
>
> rockchip,default-sample-phase:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> + $ref: /schemas/types.yaml#/definitions/uint32
> minimum: 0
> maximum: 360
> default: 0
> @@ -87,8 +86,7 @@ properties:
> If not specified 0 deg will be used.
>
> rockchip,desired-num-phases:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> + $ref: /schemas/types.yaml#/definitions/uint32
> minimum: 0
> maximum: 360
> default: 360
> diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
> index 890d47a87ac5..85bd528e9a14 100644
> --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
> +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
> @@ -27,39 +27,35 @@ properties:
> clock to this at probe time.
>
> fifo-depth:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> description:
> The maximum size of the tx/rx fifo's. If this property is not
> specified, the default value of the fifo size is determined from the
> controller registers.
> + $ref: /schemas/types.yaml#/definitions/uint32
>
> card-detect-delay:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - default: 0
> description:
> Delay in milli-seconds before detecting card after card
> insert event. The default value is 0.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 0
>
> data-addr:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> description:
> Override fifo address with value provided by DT. The default FIFO reg
> offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A)
> by driver. If the controller does not follow this rule, please use
> this property to set fifo address in device tree.
> + $ref: /schemas/types.yaml#/definitions/uint32
>
> fifo-watermark-aligned:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/flag
> description:
> Data done irq is expected if data length is less than
> watermark in PIO mode. But fifo watermark is requested to be aligned
> with data length in some SoC so that TX/RX irq can be generated with
> data done irq. Add this watermark quirk to mark this requirement and
> force fifo watermark setting accordingly.
> + $ref: /schemas/types.yaml#/definitions/flag
>
> dmas:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
> index 5d3fa412aabd..c033ac3f147d 100644
> --- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
> +++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
> @@ -75,13 +75,12 @@ patternProperties:
> allwinner,rb:
> description:
> Contains the native Ready/Busy IDs.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> - - minItems: 1
> - maxItems: 2
> - items:
> - minimum: 0
> - maximum: 1
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 1
> + maxItems: 2
> + items:
> + minimum: 0
> + maximum: 1
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> index d261b7096c69..cde7c4d79efe 100644
> --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> @@ -47,29 +47,26 @@ patternProperties:
> Contains the native Ready/Busy IDs.
>
> nand-ecc-mode:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/string
> - - enum: [ none, soft, hw, hw_syndrome, hw_oob_first, on-die ]
> description:
> Desired ECC engine, either hardware (most of the time
> embedded in the NAND controller) or software correction
> (Linux will handle the calculations). soft_bch is deprecated
> and should be replaced by soft and nand-ecc-algo.
> + $ref: /schemas/types.yaml#/definitions/string
> + enum: [none, soft, hw, hw_syndrome, hw_oob_first, on-die]
>
> nand-ecc-algo:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/string
> - - enum: [ hamming, bch, rs ]
> description:
> Desired ECC algorithm.
> + $ref: /schemas/types.yaml#/definitions/string
> + enum: [hamming, bch, rs]
>
> nand-bus-width:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 8, 16 ]
> - - default: 8
> description:
> Bus width to the NAND chip
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [8, 16]
> + default: 8
>
> nand-on-flash-bbt:
> $ref: /schemas/types.yaml#/definitions/flag
> @@ -83,18 +80,16 @@ patternProperties:
> build a volatile BBT in RAM.
>
> nand-ecc-strength:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - minimum: 1
> description:
> Maximum number of bits that can be corrected per ECC step.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 1
>
> nand-ecc-step-size:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - minimum: 1
> description:
> Number of data bytes covered by a single ECC step.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 1
>
> nand-ecc-maximize:
> $ref: /schemas/types.yaml#/definitions/flag
> diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> index 7a784dc4e513..798fa5fb7bb2 100644
> --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> @@ -76,36 +76,35 @@ properties:
>
> Please refer to 2.4.1 Message RAM Configuration in Bosch
> M_CAN user manual for details.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/int32-array
> - - items:
> - items:
> - - description: The 'offset' is an address offset of the Message RAM
> - where the following elements start from. This is usually
> - set to 0x0 if you're using a private Message RAM.
> - default: 0
> - - description: 11-bit Filter 0-128 elements / 0-128 words
> - minimum: 0
> - maximum: 128
> - - description: 29-bit Filter 0-64 elements / 0-128 words
> - minimum: 0
> - maximum: 64
> - - description: Rx FIFO 0 0-64 elements / 0-1152 words
> - minimum: 0
> - maximum: 64
> - - description: Rx FIFO 1 0-64 elements / 0-1152 words
> - minimum: 0
> - maximum: 64
> - - description: Rx Buffers 0-64 elements / 0-1152 words
> - minimum: 0
> - maximum: 64
> - - description: Tx Event FIFO 0-32 elements / 0-64 words
> - minimum: 0
> - maximum: 32
> - - description: Tx Buffers 0-32 elements / 0-576 words
> - minimum: 0
> - maximum: 32
> - maxItems: 1
> + $ref: /schemas/types.yaml#/definitions/int32-array
> + items:
> + items:
> + - description: The 'offset' is an address offset of the Message RAM where
> + the following elements start from. This is usually set to 0x0 if
> + you're using a private Message RAM.
> + default: 0
> + - description: 11-bit Filter 0-128 elements / 0-128 words
> + minimum: 0
> + maximum: 128
> + - description: 29-bit Filter 0-64 elements / 0-128 words
> + minimum: 0
> + maximum: 64
> + - description: Rx FIFO 0 0-64 elements / 0-1152 words
> + minimum: 0
> + maximum: 64
> + - description: Rx FIFO 1 0-64 elements / 0-1152 words
> + minimum: 0
> + maximum: 64
> + - description: Rx Buffers 0-64 elements / 0-1152 words
> + minimum: 0
> + maximum: 64
> + - description: Tx Event FIFO 0-32 elements / 0-64 words
> + minimum: 0
> + maximum: 32
> + - description: Tx Buffers 0-32 elements / 0-576 words
> + minimum: 0
> + maximum: 32
> + maxItems: 1
>
> can-transceiver:
> $ref: can-transceiver.yaml#
> diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
> index ac471b60ed6a..1c4474036d46 100644
> --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
> +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
> @@ -14,25 +14,23 @@ properties:
> pattern: "^ethernet(@.*)?$"
>
> local-mac-address:
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/uint8-array
> - - items:
> - - minItems: 6
> - maxItems: 6
> description:
> Specifies the MAC address that was assigned to the network device.
> + $ref: /schemas/types.yaml#definitions/uint8-array
> + items:
> + - minItems: 6
> + maxItems: 6
>
> mac-address:
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/uint8-array
> - - items:
> - - minItems: 6
> - maxItems: 6
> description:
> Specifies the MAC address that was last used by the boot
> program; should be used in cases where the MAC address assigned
> to the device by the boot program is different from the
> local-mac-address property.
> + $ref: /schemas/types.yaml#definitions/uint8-array
> + items:
> + - minItems: 6
> + maxItems: 6
>
> max-frame-size:
> $ref: /schemas/types.yaml#definitions/uint32
> @@ -133,15 +131,14 @@ properties:
> is used for components that can have configurable fifo sizes.
>
> managed:
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/string
> - - default: auto
> - enum:
> - - auto
> - - in-band-status
> description:
> Specifies the PHY management type. If auto is set and fixed-link
> is not specified, it uses MDIO for management.
> + $ref: /schemas/types.yaml#definitions/string
> + default: auto
> + enum:
> + - auto
> + - in-band-status
>
> fixed-link:
> allOf:
> @@ -183,11 +180,10 @@ properties:
> then:
> properties:
> speed:
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/uint32
> - - enum: [10, 100, 1000]
> description:
> Link speed.
> + $ref: /schemas/types.yaml#definitions/uint32
> + enum: [10, 100, 1000]
>
> full-duplex:
> $ref: /schemas/types.yaml#definitions/flag
> diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
> index 5a6c9d20c0ba..1788884b8c28 100644
> --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml
> +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
> @@ -20,15 +20,13 @@ allOf:
> properties:
> qca,clk-out-frequency:
> description: Clock output frequency in Hertz.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 25000000, 50000000, 62500000, 125000000 ]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [25000000, 50000000, 62500000, 125000000]
>
> qca,clk-out-strength:
> description: Clock output driver strength.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 0, 1, 2 ]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2]
>
> qca,keep-pll-enabled:
> description: |
> @@ -52,17 +50,14 @@ properties:
> type: object
> description:
> Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V.
> - allOf:
> - - $ref: /schemas/regulator/regulator.yaml
> + $ref: /schemas/regulator/regulator.yaml
>
> vddh-regulator:
> type: object
> description:
> Dummy subnode to model the external connection of the PHY VDDH
> regulator to VDDIO.
> - allOf:
> - - $ref: /schemas/regulator/regulator.yaml
> -
> + $ref: /schemas/regulator/regulator.yaml
>
> examples:
> - |
> diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> index e08cd4c4d568..3c825c74d596 100644
> --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> @@ -199,14 +199,13 @@ properties:
>
> snps,reset-delays-us:
> deprecated: true
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/uint32-array
> - - minItems: 3
> - maxItems: 3
> description:
> Triplet of delays. The 1st cell is reset pre-delay in micro
> seconds. The 2nd cell is reset pulse in micro seconds. The 3rd
> cell is reset post-delay in micro seconds.
> + $ref: /schemas/types.yaml#definitions/uint32-array
> + minItems: 3
> + maxItems: 3
>
> snps,aal:
> $ref: /schemas/types.yaml#definitions/flag
> @@ -301,27 +300,24 @@ allOf:
> then:
> properties:
> snps,pbl:
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/uint32
> - - enum: [2, 4, 8]
> description:
> Programmable Burst Length (tx and rx)
> + $ref: /schemas/types.yaml#definitions/uint32
> + enum: [2, 4, 8]
>
> snps,txpbl:
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/uint32
> - - enum: [2, 4, 8]
> description:
> Tx Programmable Burst Length. If set, DMA tx will use this
> value rather than snps,pbl.
> + $ref: /schemas/types.yaml#definitions/uint32
> + enum: [2, 4, 8]
>
> snps,rxpbl:
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/uint32
> - - enum: [2, 4, 8]
> description:
> Rx Programmable Burst Length. If set, DMA rx will use this
> value rather than snps,pbl.
> + $ref: /schemas/types.yaml#definitions/uint32
> + enum: [2, 4, 8]
>
> snps,no-pbl-x8:
> $ref: /schemas/types.yaml#definitions/flag
> diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> index 8fc8d3be303b..1dd5a9bd9db7 100644
> --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> @@ -150,10 +150,9 @@ properties:
> patternProperties:
> "^mdio@":
> type: object
> - allOf:
> - - $ref: "ti,davinci-mdio.yaml#"
> description:
> CPSW MDIO bus.
> + $ref: "ti,davinci-mdio.yaml#"
>
>
> required:
> diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
> index 2ea14ab29254..d454c1fab930 100644
> --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
> +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
> @@ -40,10 +40,9 @@ properties:
> ti,hwmods:
> description: TI hwmod name
> deprecated: true
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/string-array
> - - items:
> - const: davinci_mdio
> + $ref: /schemas/types.yaml#/definitions/string-array
> + items:
> + const: davinci_mdio
>
> if:
> properties:
> diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
> index 48a98dae00de..64b2c64ca806 100644
> --- a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
> @@ -71,10 +71,9 @@ properties:
>
> max-link-speed:
> description: Specify PCI Gen for link capability.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 1, 2, 3, 4 ]
> - - default: 1
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [1, 2, 3, 4]
> + default: 1
>
> bus-range:
> description: Range of bus numbers associated with this controller.
> diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> index bfefd09d8c1e..7556be6e2754 100644
> --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> @@ -84,13 +84,12 @@ properties:
> gpio-line-names: true
>
> input-debounce:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> - - minItems: 1
> - maxItems: 5
> description:
> Debouncing periods in microseconds, one period per interrupt
> bank found in the controller
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 1
> + maxItems: 5
>
> patternProperties:
> # It's pretty scary, but the basic idea is that:
> @@ -115,9 +114,8 @@ patternProperties:
> bias-pull-down: true
>
> drive-strength:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 10, 20, 30, 40 ]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [10, 20, 30, 40]
>
> required:
> - pins
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> index 7651a675ab2d..017d9593573b 100644
> --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> @@ -33,26 +33,23 @@ patternProperties:
> then:
> patternProperties:
> "^function|groups$":
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/string"
> - - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14,
> - ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT,
> - DDCCLK, DDCDAT, EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2,
> - GPID4, GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12,
> - I2C13, I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD,
> - LPCPME, LPCRST, LPCSMI, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1,
> - NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
> - NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NDTS4, NRI1, NRI2,
> - NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, PWM1, PWM2, PWM3,
> - PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, ROM16,
> - ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, RXD4,
> - SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
> - SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
> - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG,
> - SPI1PASSTHRU, SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7,
> - TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1,
> - USB2H1, USBCKI, VGABIOS_ROM, VGAHS, VGAVS, VPI18, VPI24, VPI30,
> - VPO12, VPO24, WDTRST1, WDTRST2 ]
> + $ref: "/schemas/types.yaml#/definitions/string"
> + enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
> + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
> + EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
> + GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,
> + I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK,
> + MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2,
> + NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4,
> + NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0,
> + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
> + RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3,
> + RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
> + SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
> + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU,
> + SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2,
> + TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
> + VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
> index 36feaf5e2dff..0172b78e2f27 100644
> --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
> @@ -29,8 +29,8 @@ properties:
> aspeed,external-nodes:
> minItems: 2
> maxItems: 2
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/phandle-array
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> +
> description: |
> A cell of phandles to external controller nodes:
> 0: compatible with "aspeed,ast2500-gfx", "syscon"
> @@ -43,28 +43,25 @@ patternProperties:
> then:
> patternProperties:
> "^function|groups$":
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/string"
> - - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14,
> - ADC15, ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT,
> - DDCCLK, DDCDAT, ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4,
> - GPID6, GPIE0, GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13,
> - I2C14, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, LAD0, LAD1,
> - LAD2, LAD3, LCLK, LFRAME, LPCHC, LPCPD, LPCPLUS, LPCPME, LPCRST,
> - LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2,
> - NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3,
> - NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1,
> - NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, PWM1, PWM2,
> - PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2, RXD1,
> - RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
> - SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
> - SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI,
> - SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1,
> - SPI1DEBUG, SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO,
> - SPI2MOSI, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1,
> - TXD2, TXD3, TXD4, UART6, USB11BHID, USB2AD, USB2AH, USB2BD,
> - USB2BH, USBCKI, VGABIOSROM, VGAHS, VGAVS, VPI24, VPO, WDTRST1,
> - WDTRST2, ]
> + $ref: "/schemas/types.yaml#/definitions/string"
> + enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
> + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
> + ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
> + GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,
> + I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC,
> + LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK,
> + MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
> + NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2,
> + NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0,
> + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
> + RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13,
> + SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
> + SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
> + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG,
> + SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3,
> + TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6,
> + USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
> + VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
> index 45af29bc3202..1506726c7fea 100644
> --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
> @@ -30,64 +30,58 @@ patternProperties:
> then:
> properties:
> function:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/string"
> - - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
> - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC,
> - ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0,
> - GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
> - GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11,
> - I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6,
> - I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
> - LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2,
> - MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2,
> - NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3,
> - NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1,
> - NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
> - PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7,
> - PWM8, PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3,
> - RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12,
> - SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5,
> - SALT6, SALT7, SALT8, SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL,
> - SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
> - SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
> - TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
> - TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
> - THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13,
> - UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
> - USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
> - WDTRST4, ]
> + $ref: "/schemas/types.yaml#/definitions/string"
> + enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
> + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
> + FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
> + GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,
> + GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16,
> + I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5,
> + I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
> + MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4,
> + NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
> + NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4,
> + NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
> + PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8,
> + PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
> + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
> + SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8,
> + SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ,
> + SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
> + SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14,
> + TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0,
> + THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12,
> + UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
> + USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4]
> +
> groups:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/string"
> - - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
> - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1,
> - EMMCG4, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID,
> - FWQSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5,
> - GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6,
> - GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14,
> - I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9,
> - I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD,
> - LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, MACLINK4,
> - MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1,
> - NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
> - NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
> - OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1,
> - PWM12G0, PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0,
> - PWM15G1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1,
> - PWM9G0, PWM9G1, QSPI1, QSPI2, RGMII1, RGMII2, RGMII3, RGMII4,
> - RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1,
> - SALT10G0, SALT10G1, SALT11G0, SALT11G1, SALT12G0, SALT12G1,
> - SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT15G1,
> - SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7,
> - SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
> - SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
> - SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
> - TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
> - TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
> - THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0,
> - UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, USBA,
> - USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ]
> + $ref: "/schemas/types.yaml#/definitions/string"
> + enum: [ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
> + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
> + EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
> + GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
> + GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
> + I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
> + I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
> + LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3,
> + MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4,
> + NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
> + NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
> + OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0,
> + PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2,
> + PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
> + QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
> + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1,
> + SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0,
> + SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6,
> + SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
> + SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR,
> + SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
> + TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6,
> + TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3,
> + TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
> + UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
> + WDTRST3, WDTRST4]
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
> index 6297e78418cf..d474bc1f393b 100644
> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
> @@ -37,22 +37,21 @@ patternProperties:
> be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
> integer CONFIG is the pad setting value like pull-up on this pin. Please
> refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-matrix
> - - items:
> - items:
> - - description: |
> - "mux_reg" indicates the offset of mux register.
> - - description: |
> - "conf_reg" indicates the offset of pad configuration register.
> - - description: |
> - "input_reg" indicates the offset of select input register.
> - - description: |
> - "mux_val" indicates the mux value to be applied.
> - - description: |
> - "input_val" indicates the select input value to be applied.
> - - description: |
> - "pad_setting" indicates the pad configuration value to be applied.
> + $ref: /schemas/types.yaml#/definitions/uint32-matrix
> + items:
> + items:
> + - description: |
> + "mux_reg" indicates the offset of mux register.
> + - description: |
> + "conf_reg" indicates the offset of pad configuration register.
> + - description: |
> + "input_reg" indicates the offset of select input register.
> + - description: |
> + "mux_val" indicates the mux value to be applied.
> + - description: |
> + "input_val" indicates the select input value to be applied.
> + - description: |
> + "pad_setting" indicates the pad configuration value to be applied.
>
> required:
> - fsl,pins
> diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
> index cd2b436350ef..2c0acb405e6c 100644
> --- a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
> @@ -24,12 +24,10 @@ properties:
> patternProperties:
> '-pins$':
> type: object
> - allOf:
> - - $ref: pincfg-node.yaml#
> - - $ref: pinmux-node.yaml#
> description:
> Pinctrl node's client devices use subnodes for desired pin configuration.
> Client device subnodes use below standard properties.
> + $ref: pinmux-node.yaml#
>
> properties:
> function: true
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
> index 732d9075560b..ef8877ddb1eb 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
> @@ -122,11 +122,10 @@ properties:
> this, "pins" or "pinmux" has to be specified)
>
> pinmux:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> description:
> The list of numeric pin ids and their mux settings that properties in the
> node apply to (either this, "pins" or "groups" have to be specified)
> + $ref: /schemas/types.yaml#/definitions/uint32-array
>
> pinctrl-pin-array:
> $ref: /schemas/types.yaml#/definitions/uint32-array
> diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> index 46a0478cb924..e9d6e54fc0a0 100644
> --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> @@ -37,21 +37,18 @@ properties:
> hwlocks: true
>
> st,syscfg:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> description: Should be phandle/offset/mask
> - Phandle to the syscon node which includes IRQ mux selection.
> - The offset of the IRQ mux selection register.
> - The field mask of IRQ mux, needed if different of 0xf.
> + $ref: "/schemas/types.yaml#/definitions/phandle-array"
>
> st,package:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [1, 2, 4, 8]
> description:
> Indicates the SOC package used.
> More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
> -
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [1, 2, 4, 8]
>
> patternProperties:
> '^gpio@[0-9a-f]*$':
> @@ -78,33 +75,31 @@ patternProperties:
> maximum: 16
>
> st,bank-name:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/string"
> - - enum:
> - - GPIOA
> - - GPIOB
> - - GPIOC
> - - GPIOD
> - - GPIOE
> - - GPIOF
> - - GPIOG
> - - GPIOH
> - - GPIOI
> - - GPIOJ
> - - GPIOK
> - - GPIOZ
> description:
> Should be a name string for this bank as specified in the datasheet.
> + $ref: "/schemas/types.yaml#/definitions/string"
> + enum:
>
> - st,bank-ioport:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - - maximum: 11
> + - GPIOA
> + - GPIOB
> + - GPIOC
> + - GPIOD
> + - GPIOE
> + - GPIOF
> + - GPIOG
> + - GPIOH
> + - GPIOI
> + - GPIOJ
> + - GPIOK
> + - GPIOZ
>
> + st,bank-ioport:
> description:
> Should correspond to the EXTI IOport selection (EXTI line used
> to select GPIOs as interrupts).
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 11
>
> required:
> - gpio-controller
> @@ -125,8 +120,8 @@ patternProperties:
> configuration, pullups, drive, output high/low and output speed.
> properties:
> pinmux:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32-array"
> + $ref: "/schemas/types.yaml#/definitions/uint32-array"
> +
> description: |
> Integer array, represents gpio pin number and mux setting.
> Supported pin number and mux varies for different SoCs, and are
> @@ -180,9 +175,8 @@ patternProperties:
> 1: Medium speed
> 2: Fast speed
> 3: High speed
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [0, 1, 2, 3]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3]
>
> required:
> - pinmux
> diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
> index 6c6079fe1351..49fd3feabba5 100644
> --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
> +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
> @@ -56,8 +56,7 @@ properties:
>
> amlogic,ao-sysctrl:
> description: phandle to the AO sysctrl node
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/phandle
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
> index 4fe64f4dd594..fc799b0577d4 100644
> --- a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
> +++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
> @@ -78,12 +78,11 @@ properties:
> A list of PWM channels used as PWM outputs on particular platform.
> It is an array of up to 5 elements being indices of PWM channels
> (from 0 to 4), the order does not matter.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> - - uniqueItems: true
> - - items:
> - minimum: 0
> - maximum: 4
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + uniqueItems: true
> + items:
> + minimum: 0
> + maximum: 4
>
> required:
> - clocks
> diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
> index 9d3b28417fb6..605590384b48 100644
> --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
> @@ -46,24 +46,22 @@ properties:
> 0: LOW
> 1: HIGH
> Default is LOW if nothing else is specified.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> - - maxItems: 8
> - items:
> - enum: [ 0, 1 ]
> - default: 0
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + maxItems: 8
> + items:
> + enum: [0, 1]
> + default: 0
>
> states:
> description: Selection of available voltages/currents provided by this
> regulator and matching GPIO configurations to achieve them. If there are
> no states in the "states" array, use a fixed regulator instead.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-matrix
> - - maxItems: 8
> - items:
> - items:
> - - description: Voltage in microvolts
> - - description: GPIO group state value
> + $ref: /schemas/types.yaml#/definitions/uint32-matrix
> + maxItems: 8
> + items:
> + items:
> + - description: Voltage in microvolts
> + - description: GPIO group state value
>
> startup-delay-us:
> description: startup time in microseconds
> @@ -81,12 +79,11 @@ properties:
>
> regulator-type:
> description: Specifies what is being regulated.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/string
> - - enum:
> - - voltage
> - - current
> - default: voltage
> + $ref: /schemas/types.yaml#/definitions/string
> + enum:
> + - voltage
> + - current
> + default: voltage
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
> index a682af0dc67e..e5422eaf851d 100644
> --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
> +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
> @@ -21,17 +21,17 @@ properties:
>
> regulators:
> type: object
> - allOf:
> - - $ref: regulator.yaml#
> + $ref: regulator.yaml#
> +
> description: |
> list of regulators provided by this controller, must be named
> after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5]
>
> properties:
> mps,switch-freq:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint8"
> - enum: [ 0, 1, 2, 3 ]
> + $ref: "/schemas/types.yaml#/definitions/uint8"
> +
> + enum: [0, 1, 2, 3]
> default: 2
> description: |
> switching frequency must be one of following corresponding value
> @@ -40,32 +40,29 @@ properties:
> patternProperties:
> "^ldo[1-4]$":
> type: object
> - allOf:
> - - $ref: regulator.yaml#
> + $ref: regulator.yaml#
>
> "^ldortc$":
> type: object
> - allOf:
> - - $ref: regulator.yaml#
> + $ref: regulator.yaml#
>
> "^buck[1-4]$":
> type: object
> - allOf:
> - - $ref: regulator.yaml#
> + $ref: regulator.yaml#
>
> properties:
> mps,buck-softstart:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint8"
> - enum: [ 0, 1, 2, 3 ]
> + $ref: "/schemas/types.yaml#/definitions/uint8"
> +
> + enum: [0, 1, 2, 3]
> description: |
> defines the soft start time of this buck, must be one of the following
> corresponding values 150us, 300us, 610us, 920us
>
> mps,buck-phase-delay:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint8"
> - enum: [ 0, 1, 2, 3 ]
> + $ref: "/schemas/types.yaml#/definitions/uint8"
> +
> + enum: [0, 1, 2, 3]
> description: |
> defines the phase delay of this buck, must be one of the following
> corresponding values 0deg, 90deg, 180deg, 270deg
> diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
> index 91a39a33000b..ec505dbbf87c 100644
> --- a/Documentation/devicetree/bindings/regulator/regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
> @@ -123,9 +123,8 @@ properties:
> 0: Disable active discharge.
> 1: Enable active discharge.
> Absence of this property will leave configuration to default.
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - enum: [ 0, 1 ]
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + enum: [0, 1]
>
> regulator-coupled-with:
> description: Regulators with which the regulator is coupled. The linkage
> diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
> index 71ce032b8cf8..ac74e214b050 100644
> --- a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
> @@ -24,10 +24,9 @@ description: |
> patternProperties:
> "^LDO[1-7]$":
> type: object
> - allOf:
> - - $ref: regulator.yaml#
> description:
> Properties for single LDO regulator.
> + $ref: regulator.yaml#
>
> properties:
> regulator-name:
> @@ -37,10 +36,9 @@ patternProperties:
>
> "^BUCK[1-7]$":
> type: object
> - allOf:
> - - $ref: regulator.yaml#
> description:
> Properties for single BUCK regulator.
> + $ref: regulator.yaml#
>
> properties:
> regulator-name:
> @@ -49,40 +47,36 @@ patternProperties:
> should be "buck1", ..., "buck7"
>
> rohm,dvs-run-voltage:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - maximum: 3300000
> description:
> PMIC default "RUN" state voltage in uV. See below table for
> bucks which support this. 0 means disabled.
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 3300000
>
> rohm,dvs-idle-voltage:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - maximum: 3300000
> description:
> PMIC default "IDLE" state voltage in uV. See below table for
> bucks which support this. 0 means disabled.
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 3300000
>
> rohm,dvs-suspend-voltage:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - maximum: 3300000
> description:
> PMIC default "SUSPEND" state voltage in uV. See below table for
> bucks which support this. 0 means disabled.
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 3300000
>
> rohm,dvs-lpsr-voltage:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - maximum: 3300000
> description:
> PMIC default "LPSR" state voltage in uV. See below table for
> bucks which support this. 0 means disabled.
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 3300000
>
> # Supported default DVS states:
> # buck | run | idle | suspend | lpsr
> diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
> index 64f1183ce841..cb336b2c16af 100644
> --- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
> +++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
> @@ -23,8 +23,7 @@ properties:
> - st,stm32mp1-booster
>
> st,syscfg:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: "/schemas/types.yaml#/definitions/phandle-array"
> description: phandle to system configuration controller.
>
> vdda-supply:
> diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
> index 8d8f38fe85dc..e6322bc3e447 100644
> --- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
> +++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
> @@ -26,8 +26,7 @@ patternProperties:
> "^(reg11|reg18|usb33)$":
> type: object
>
> - allOf:
> - - $ref: "regulator.yaml#"
> + $ref: "regulator.yaml#"
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> index 4ff4d3df0a06..4ffa25268fcc 100644
> --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
> @@ -28,22 +28,20 @@ properties:
> maxItems: 1
>
> st,syscfg-holdboot:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> description: remote processor reset hold boot
> - Phandle of syscon block.
> - The offset of the hold boot setting register.
> - The field mask of the hold boot.
> + $ref: "/schemas/types.yaml#/definitions/phandle-array"
> maxItems: 1
>
> st,syscfg-tz:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> description:
> Reference to the system configuration which holds the RCC trust zone mode
> - Phandle of syscon block.
> - The offset of the RCC trust zone mode register.
> - The field mask of the RCC trust zone mode.
> + $ref: "/schemas/types.yaml#/definitions/phandle-array"
> maxItems: 1
>
> interrupts:
> @@ -90,8 +88,7 @@ properties:
> (see ../reserved-memory/reserved-memory.txt)
>
> st,syscfg-pdds:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: "/schemas/types.yaml#/definitions/phandle-array"
> description: |
> Reference to the system configuration which holds the remote
> 1st cell: phandle to syscon block
> diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> index 8ac437282659..6b2d56cc3f38 100644
> --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> @@ -21,8 +21,7 @@ properties:
>
> intel,global-reset:
> description: Global reset register offset and bit offset.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> items:
> - description: Register offset
> - description: Register bit offset
> diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
> index 04819ad379c2..f80ba2c66f71 100644
> --- a/Documentation/devicetree/bindings/riscv/cpus.yaml
> +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
> @@ -40,24 +40,18 @@ properties:
> and identifies the type of the hart.
>
> mmu-type:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/string"
> - - enum:
> - - riscv,sv32
> - - riscv,sv39
> - - riscv,sv48
> description:
> Identifies the MMU address translation mode used on this
> hart. These values originate from the RISC-V Privileged
> Specification document, available from
> https://riscv.org/specifications/
> + $ref: "/schemas/types.yaml#/definitions/string"
> + enum:
> + - riscv,sv32
> + - riscv,sv39
> + - riscv,sv48
>
> riscv,isa:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/string"
> - - enum:
> - - rv64imac
> - - rv64imafdc
> description:
> Identifies the specific RISC-V instruction set architecture
> supported by the hart. These are documented in the RISC-V
> @@ -67,6 +61,10 @@ properties:
> While the isa strings in ISA specification are case
> insensitive, letters in the riscv,isa string must be all
> lowercase to simplify parsing.
> + $ref: "/schemas/types.yaml#/definitions/string"
> + enum:
> + - rv64imac
> + - rv64imafdc
>
> # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
> timebase-frequency: false
> diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
> index 57b087574aa1..5456604b1c14 100644
> --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
> +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
> @@ -32,11 +32,10 @@ properties:
> maxItems: 1
>
> st,syscfg:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> - - items:
> - minItems: 3
> - maxItems: 3
> + $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + items:
> + minItems: 3
> + maxItems: 3
> description: |
> Phandle/offset/mask triplet. The phandle to pwrcfg used to
> access control register at offset, and change the dbp (Disable Backup
> diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml
> index 1a64d59152aa..c23c93b400f0 100644
> --- a/Documentation/devicetree/bindings/serial/pl011.yaml
> +++ b/Documentation/devicetree/bindings/serial/pl011.yaml
> @@ -88,17 +88,15 @@ properties:
> description:
> Rate at which poll occurs when auto-poll is set.
> default 100ms.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - default: 100
> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 100
>
> poll-timeout-ms:
> description:
> Poll timeout when auto-poll is set, default
> 3000ms.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - default: 3000
> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 3000
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
> index 2b8261ea6d9c..8141e4aad530 100644
> --- a/Documentation/devicetree/bindings/serial/rs485.yaml
> +++ b/Documentation/devicetree/bindings/serial/rs485.yaml
> @@ -16,20 +16,18 @@ maintainers:
> properties:
> rs485-rts-delay:
> description: prop-encoded-array <a b>
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> - - items:
> - items:
> - - description:
> - Delay between rts signal and beginning of data sent in milliseconds.
> - It corresponds to the delay before sending data.
> - default: 0
> - maximum: 1000
> - - description:
> - Delay between end of data sent and rts signal in milliseconds.
> - It corresponds to the delay after sending data and actual release of the line.
> - default: 0
> - maximum: 1000
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + items:
> + items:
> + - description: Delay between rts signal and beginning of data sent in
> + milliseconds. It corresponds to the delay before sending data.
> + default: 0
> + maximum: 1000
> + - description: Delay between end of data sent and rts signal in milliseconds.
> + It corresponds to the delay after sending data and actual release
> + of the line.
> + default: 0
> + maximum: 1000
>
> rs485-rts-active-low:
> description: drive RTS low when sending (default is high).
> diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
> index 9d2ce347875b..ff2f49fe322c 100644
> --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
> @@ -51,9 +51,8 @@ properties:
>
> samsung,uart-fifosize:
> description: The fifo size supported by the UART channel.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [16, 64, 256]
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [16, 64, 256]
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
> index 76ee695097bf..fb78967ee17b 100644
> --- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
> +++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
> @@ -35,23 +35,21 @@ properties:
> adi,decimation-ratio:
> description: |
> This property set's the decimation ratio of PDM to PCM audio data.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [64, 32, 16]
> - default: 64
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [64, 32, 16]
> + default: 64
>
> adi,pdm-clk-map:
> description: |
> The ADAU7118 has two PDM clocks for the four Inputs. Each input must be
> assigned to one of these two clocks. This property set's the mapping
> between the clocks and the inputs.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32-array
> - - minItems: 4
> - maxItems: 4
> - items:
> - maximum: 1
> - default: [0, 0, 1, 1]
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 4
> + maxItems: 4
> + items:
> + maximum: 1
> + default: [0, 0, 1, 1]
>
> required:
> - "#sound-dai-cells"
> diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
> index ea1d2efb2aaa..98938db56285 100644
> --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
> +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
> @@ -57,32 +57,31 @@ properties:
> A list of the connections between audio components. Each entry
> is a pair of strings, the first being the connection's sink, the
> second being the connection's source.
> - allOf:
> - - $ref: /schemas/types.yaml#definitions/non-unique-string-array
> - - minItems: 2
> - maxItems: 18
> - items:
> - enum:
> + $ref: /schemas/types.yaml#definitions/non-unique-string-array
> + minItems: 2
> + maxItems: 18
> + items:
> + enum:
> # Audio Pins on the SoC
> - - HP
> - - HPCOM
> - - LINEIN
> - - LINEOUT
> - - MIC1
> - - MIC2
> - - MIC3
> + - HP
> + - HPCOM
> + - LINEIN
> + - LINEOUT
> + - MIC1
> + - MIC2
> + - MIC3
>
> # Microphone Biases from the SoC
> - - HBIAS
> - - MBIAS
> + - HBIAS
> + - MBIAS
>
> # Board Connectors
> - - Headphone
> - - Headset Mic
> - - Line In
> - - Line Out
> - - Mic
> - - Speaker
> + - Headphone
> + - Headset Mic
> + - Line In
> + - Line Out
> + - Mic
> + - Speaker
>
> allwinner,codec-analog-controls:
> $ref: /schemas/types.yaml#/definitions/phandle
> diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> index a495d5fc0d23..e8f716b5f875 100644
> --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
> @@ -102,8 +102,7 @@ properties:
>
> gpio@42:
> type: object
> - allOf:
> - - $ref: ../gpio/qcom,wcd934x-gpio.yaml#
> + $ref: ../gpio/qcom,wcd934x-gpio.yaml#
>
> patternProperties:
> "^.*@[0-9a-f]+$":
> diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
> index b6c1dd2a9c5e..c8f0985a8738 100644
> --- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
> +++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
> @@ -96,43 +96,39 @@ properties:
>
> renesas,dtdl:
> description: delay sync signal (setup) in transmit mode.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum:
> - - 0 # no bit delay
> - - 50 # 0.5-clock-cycle delay
> - - 100 # 1-clock-cycle delay
> - - 150 # 1.5-clock-cycle delay
> - - 200 # 2-clock-cycle delay
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum:
> + - 0 # no bit delay
> + - 50 # 0.5-clock-cycle delay
> + - 100 # 1-clock-cycle delay
> + - 150 # 1.5-clock-cycle delay
> + - 200 # 2-clock-cycle delay
>
> renesas,syncdl:
> description: delay sync signal (hold) in transmit mode
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum:
> - - 0 # no bit delay
> - - 50 # 0.5-clock-cycle delay
> - - 100 # 1-clock-cycle delay
> - - 150 # 1.5-clock-cycle delay
> - - 200 # 2-clock-cycle delay
> - - 300 # 3-clock-cycle delay
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum:
> + - 0 # no bit delay
> + - 50 # 0.5-clock-cycle delay
> + - 100 # 1-clock-cycle delay
> + - 150 # 1.5-clock-cycle delay
> + - 200 # 2-clock-cycle delay
> + - 300 # 3-clock-cycle delay
>
> renesas,tx-fifo-size:
> # deprecated for soctype-specific bindings
> description: |
> Override the default TX fifo size. Unit is words. Ignored if 0.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - maxItems: 1
> + $ref: /schemas/types.yaml#/definitions/uint32
> + maxItems: 1
> default: 64
>
> renesas,rx-fifo-size:
> # deprecated for soctype-specific bindings
> description: |
> Override the default RX fifo size. Unit is words. Ignored if 0.
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - maxItems: 1
> + $ref: /schemas/types.yaml#/definitions/uint32
> + maxItems: 1
> default: 64
>
> required:
> diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
> index d8e5509a7081..c6a2f543648b 100644
> --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
> +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
> @@ -115,24 +115,22 @@ patternProperties:
> Maximum SPI clocking speed of the device in Hz.
>
> spi-rx-bus-width:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 1, 2, 4, 8 ]
> - - default: 1
> description:
> Bus width to the SPI bus used for read transfers.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [1, 2, 4, 8]
> + default: 1
>
> spi-rx-delay-us:
> description:
> Delay, in microseconds, after a read transfer.
>
> spi-tx-bus-width:
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - enum: [ 1, 2, 4, 8 ]
> - - default: 1
> description:
> Bus width to the SPI bus used for write transfers.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [1, 2, 4, 8]
> + default: 1
>
> spi-tx-delay-us:
> description:
> diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
> index 22ba4e90655b..22999024477f 100644
> --- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml
> +++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
> @@ -80,55 +80,48 @@ patternProperties:
> properties:
> pl022,interface:
> description: SPI interface type
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - enum:
> - - 0 # SPI
> - - 1 # Texas Instruments Synchronous Serial Frame Format
> - - 2 # Microwire (Half Duplex)
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + enum:
> + - 0 # SPI
> + - 1 # Texas Instruments Synchronous Serial Frame Format
> + - 2 # Microwire (Half Duplex)
>
> pl022,com-mode:
> description: Specifies the transfer mode
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - enum:
> - - 0 # interrupt mode
> - - 1 # polling mode
> - - 2 # DMA mode
> - default: 1
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + enum:
> + - 0 # interrupt mode
> + - 1 # polling mode
> + - 2 # DMA mode
> + default: 1
>
> pl022,rx-level-trig:
> description: Rx FIFO watermark level
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - maximum: 4
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 4
>
> pl022,tx-level-trig:
> description: Tx FIFO watermark level
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - maximum: 4
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 4
>
> pl022,ctrl-len:
> description: Microwire interface - Control length
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0x03
> - maximum: 0x1f
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0x03
> + maximum: 0x1f
>
> pl022,wait-state:
> description: Microwire interface - Wait state
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - enum: [ 0, 1 ]
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + enum: [0, 1]
>
> pl022,duplex:
> description: Microwire interface - Full/Half duplex
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - enum: [ 0, 1 ]
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + enum: [0, 1]
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/spi/spi-sifive.yaml b/Documentation/devicetree/bindings/spi/spi-sifive.yaml
> index 140e4351a19f..28040598bfae 100644
> --- a/Documentation/devicetree/bindings/spi/spi-sifive.yaml
> +++ b/Documentation/devicetree/bindings/spi/spi-sifive.yaml
> @@ -50,18 +50,16 @@ properties:
> sifive,fifo-depth:
> description:
> Depth of hardware queues; defaults to 8
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - enum: [ 8 ]
> - - default: 8
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + enum: [8]
> + default: 8
>
> sifive,max-bits-per-word:
> description:
> Maximum bits per word; defaults to 8
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 8 ]
> - - default: 8
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + enum: [0, 1, 2, 3, 4, 5, 6, 7, 8]
> + default: 8
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index 2ddd39d96766..d7be931b42d2 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -73,12 +73,11 @@ properties:
> - const: calib_sel
>
> "#qcom,sensors":
> - allOf:
> - - $ref: /schemas/types.yaml#/definitions/uint32
> - - minimum: 1
> - - maximum: 16
> description:
> Number of sensors enabled on this platform
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 1
> + maximum: 16
>
> "#thermal-sensor-cells":
> const: 1
> diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> index 6ff718ede184..d83a1f97f911 100644
> --- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> +++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
> @@ -65,10 +65,9 @@ patternProperties:
> description: A timer node has up to 8 frame sub-nodes, each with the following properties.
> properties:
> frame-number:
> - allOf:
> - - $ref: "/schemas/types.yaml#/definitions/uint32"
> - - minimum: 0
> - maximum: 7
> + $ref: "/schemas/types.yaml#/definitions/uint32"
> + minimum: 0
> + maximum: 7
>
> interrupts:
> minItems: 1
> --
> 2.20.1
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Powered by blists - more mailing lists