| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 16 Apr 2020 14:19:03 +0200
From: Neil Armstrong <narmstrong@...libre.com>
To: kishon@...com, balbi@...nel.org, khilman@...libre.com,
martin.blumenstingl@...glemail.com
Cc: Neil Armstrong <narmstrong@...libre.com>,
linux-amlogic@...ts.infradead.org, linux-usb@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 1/8] usb: dwc3: meson-g12a: refactor usb init
Refactor the USB init code patch to handle the Amlogic GXL/GXM needing
to initialize the OTG port as Peripheral mode for the DWC2 IP to probe
correctly.
A secondary, post_init callback is added to setup the OTG PHY mode after
powering up the PHYs and before probing the DWC2 and DWC3 controllers.
Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
---
drivers/usb/dwc3/dwc3-meson-g12a.c | 52 +++++++++++++++++++++---------
1 file changed, 37 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 7027ee2ee4ab..e7a6d05f2a72 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -140,6 +140,8 @@ struct dwc3_meson_g12a_drvdata {
enum phy_mode mode);
int (*set_phy_mode)(struct dwc3_meson_g12a *priv, int i,
enum phy_mode mode);
+ int (*usb_init)(struct dwc3_meson_g12a *priv);
+ int (*usb_post_init)(struct dwc3_meson_g12a *priv);
};
static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv,
@@ -151,6 +153,8 @@ static int dwc3_meson_g12a_usb2_init_phy(struct dwc3_meson_g12a *priv, int i,
static int dwc3_meson_g12a_set_phy_mode(struct dwc3_meson_g12a *priv,
int i, enum phy_mode mode);
+static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv);
+
static struct dwc3_meson_g12a_drvdata g12a_drvdata = {
.otg_switch_supported = true,
.clks = meson_g12a_clocks,
@@ -160,6 +164,7 @@ static struct dwc3_meson_g12a_drvdata g12a_drvdata = {
.setup_regmaps = dwc3_meson_g12a_setup_regmaps,
.usb2_init_phy = dwc3_meson_g12a_usb2_init_phy,
.set_phy_mode = dwc3_meson_g12a_set_phy_mode,
+ .usb_init = dwc3_meson_g12a_usb_init,
};
static struct dwc3_meson_g12a_drvdata a1_drvdata = {
@@ -171,6 +176,7 @@ static struct dwc3_meson_g12a_drvdata a1_drvdata = {
.setup_regmaps = dwc3_meson_g12a_setup_regmaps,
.usb2_init_phy = dwc3_meson_g12a_usb2_init_phy,
.set_phy_mode = dwc3_meson_g12a_set_phy_mode,
+ .usb_init = dwc3_meson_g12a_usb_init,
};
struct dwc3_meson_g12a {
@@ -231,15 +237,11 @@ static int dwc3_meson_g12a_usb2_init_phy(struct dwc3_meson_g12a *priv, int i,
return 0;
}
-static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv)
+static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv,
+ enum phy_mode mode)
{
int i, ret;
- if (priv->otg_mode == USB_DR_MODE_PERIPHERAL)
- priv->otg_phy_mode = PHY_MODE_USB_DEVICE;
- else
- priv->otg_phy_mode = PHY_MODE_USB_HOST;
-
for (i = 0; i < priv->drvdata->num_phys; ++i) {
if (!priv->phys[i])
continue;
@@ -247,7 +249,7 @@ static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv)
if (!strstr(priv->drvdata->phy_names[i], "usb2"))
continue;
- ret = priv->drvdata->usb2_init_phy(priv, i, priv->otg_phy_mode);
+ ret = priv->drvdata->usb2_init_phy(priv, i, mode);
if (ret)
return ret;
}
@@ -284,9 +286,10 @@ static void dwc3_meson_g12a_usb3_init(struct dwc3_meson_g12a *priv)
FIELD_PREP(USB_R1_P30_PCS_TX_SWING_FULL_MASK, 127));
}
-static void dwc3_meson_g12a_usb_otg_apply_mode(struct dwc3_meson_g12a *priv)
+static void dwc3_meson_g12a_usb_otg_apply_mode(struct dwc3_meson_g12a *priv,
+ enum phy_mode mode)
{
- if (priv->otg_phy_mode == PHY_MODE_USB_DEVICE) {
+ if (mode == PHY_MODE_USB_DEVICE) {
regmap_update_bits(priv->usb_glue_regmap, USB_R0,
USB_R0_U2D_ACT, USB_R0_U2D_ACT);
regmap_update_bits(priv->usb_glue_regmap, USB_R0,
@@ -301,11 +304,12 @@ static void dwc3_meson_g12a_usb_otg_apply_mode(struct dwc3_meson_g12a *priv)
}
}
-static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv)
+static int dwc3_meson_g12a_usb_init_glue(struct dwc3_meson_g12a *priv,
+ enum phy_mode mode)
{
int ret;
- ret = dwc3_meson_g12a_usb2_init(priv);
+ ret = dwc3_meson_g12a_usb2_init(priv, mode);
if (ret)
return ret;
@@ -327,7 +331,7 @@ static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv)
if (priv->usb3_ports)
dwc3_meson_g12a_usb3_init(priv);
- dwc3_meson_g12a_usb_otg_apply_mode(priv);
+ dwc3_meson_g12a_usb_otg_apply_mode(priv, mode);
return 0;
}
@@ -406,7 +410,7 @@ static int dwc3_meson_g12a_otg_mode_set(struct dwc3_meson_g12a *priv,
if (ret)
return ret;
- dwc3_meson_g12a_usb_otg_apply_mode(priv);
+ dwc3_meson_g12a_usb_otg_apply_mode(priv, mode);
return 0;
}
@@ -555,6 +559,11 @@ static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv,
return 0;
}
+static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv)
+{
+ return dwc3_meson_g12a_usb_init_glue(priv, priv->otg_phy_mode);
+}
+
static int dwc3_meson_g12a_probe(struct platform_device *pdev)
{
struct dwc3_meson_g12a *priv;
@@ -622,7 +631,12 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
/* Get dr_mode */
priv->otg_mode = usb_get_dr_mode(dev);
- ret = dwc3_meson_g12a_usb_init(priv);
+ if (priv->otg_mode == USB_DR_MODE_PERIPHERAL)
+ priv->otg_phy_mode = PHY_MODE_USB_DEVICE;
+ else
+ priv->otg_phy_mode = PHY_MODE_USB_HOST;
+
+ ret = priv->drvdata->usb_init(priv);
if (ret)
goto err_disable_clks;
@@ -640,6 +654,12 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
goto err_phys_exit;
}
+ if (priv->drvdata->usb_post_init) {
+ ret = priv->drvdata->usb_post_init(priv);
+ if (ret)
+ goto err_phys_power;
+ }
+
ret = of_platform_populate(np, NULL, NULL, dev);
if (ret)
goto err_phys_power;
@@ -741,7 +761,9 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev)
reset_control_deassert(priv->reset);
- dwc3_meson_g12a_usb_init(priv);
+ ret = priv->drvdata->usb_init(priv);
+ if (ret)
+ return ret;
/* Init PHYs */
for (i = 0 ; i < PHY_COUNT ; ++i) {
--
2.22.0
Powered by blists - more mailing lists