| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200417190825.1363345-4-martin.blumenstingl@googlemail.com>
Date: Fri, 17 Apr 2020 21:08:24 +0200
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To: robh+dt@...nel.org, khilman@...libre.com, narmstrong@...libre.com,
linux-amlogic@...ts.infradead.org, devicetree@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH v2 3/4] soc: amlogic: meson-ee-pwrc: add support for Meson8/Meson8b/Meson8m2
This adds support for the power domains on Meson8/Meson8b/Meson8m2.
Meson8 doesn't use any reset lines while Meson8b and Meson8m2 use the
same set of reset lines (which is different from the newer SoCs).
Add dedicated compatible strings for Meson8, Meson8b and Meson8m2 to
support these differences.
Notable differences between Meson8 and G12A are:
- there is no HHI_VPU_MEM_PD_REG2 on the 32-bit SoCs
- the Meson8b datasheet describes an "audio DSP memory" power domain
which is used for the hardware audio decoder
- the "amlogic,ao-sysctrl" only includes the power management related
registers on the 32-bit SoCs, meaning the for example the
AO_RTI_GEN_PWR_SLEEP0 register is at offset (0x2 << 2) rather than
(0x3a << 2). As result of this (0x38 << 2) is subtracted from the
register offsets, which is the start of the power management related
registers.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
---
drivers/soc/amlogic/meson-ee-pwrc.c | 72 +++++++++++++++++++++++++++--
1 file changed, 69 insertions(+), 3 deletions(-)
diff --git a/drivers/soc/amlogic/meson-ee-pwrc.c b/drivers/soc/amlogic/meson-ee-pwrc.c
index 3f0261d53ad9..b30868da456a 100644
--- a/drivers/soc/amlogic/meson-ee-pwrc.c
+++ b/drivers/soc/amlogic/meson-ee-pwrc.c
@@ -14,6 +14,7 @@
#include <linux/reset-controller.h>
#include <linux/reset.h>
#include <linux/clk.h>
+#include <dt-bindings/power/meson8-power.h>
#include <dt-bindings/power/meson-g12a-power.h>
#include <dt-bindings/power/meson-sm1-power.h>
@@ -22,6 +23,12 @@
#define AO_RTI_GEN_PWR_SLEEP0 (0x3a << 2)
#define AO_RTI_GEN_PWR_ISO0 (0x3b << 2)
+/*
+ * Meson8/Meson8b/Meson8m2 only expose the power management registers of
+ * the AO-bus as syscon. Above register offsets need to subtract this offset.
+ */
+#define AO_RTI_GEN_MESON8_PMU_OFFSET (0x38 << 2)
+
/* HHI Offsets */
#define HHI_MEM_PD_REG0 (0x40 << 2)
@@ -73,6 +80,13 @@ static struct meson_ee_pwrc_top_domain g12a_pwrc_vpu = {
.iso_mask = BIT(9),
};
+static struct meson_ee_pwrc_top_domain meson8_pwrc_vpu = {
+ .sleep_reg = AO_RTI_GEN_PWR_SLEEP0 - AO_RTI_GEN_MESON8_PMU_OFFSET,
+ .sleep_mask = BIT(8),
+ .iso_reg = AO_RTI_GEN_PWR_SLEEP0 - AO_RTI_GEN_MESON8_PMU_OFFSET,
+ .iso_mask = BIT(9),
+};
+
#define SM1_EE_PD(__bit) \
{ \
.sleep_reg = AO_RTI_GEN_PWR_SLEEP0, \
@@ -124,10 +138,20 @@ static struct meson_ee_pwrc_mem_domain g12a_pwrc_mem_vpu[] = {
VPU_HHI_MEMPD(HHI_MEM_PD_REG0),
};
-static struct meson_ee_pwrc_mem_domain g12a_pwrc_mem_eth[] = {
+static struct meson_ee_pwrc_mem_domain meson8_pwrc_mem_eth[] = {
{ HHI_MEM_PD_REG0, GENMASK(3, 2) },
};
+static struct meson_ee_pwrc_mem_domain meson8_pwrc_audio_dsp_mem[] = {
+ { HHI_MEM_PD_REG0, GENMASK(1, 0) },
+};
+
+static struct meson_ee_pwrc_mem_domain meson8_pwrc_mem_vpu[] = {
+ VPU_MEMPD(HHI_VPU_MEM_PD_REG0),
+ VPU_MEMPD(HHI_VPU_MEM_PD_REG1),
+ VPU_HHI_MEMPD(HHI_MEM_PD_REG0),
+};
+
static struct meson_ee_pwrc_mem_domain sm1_pwrc_mem_vpu[] = {
VPU_MEMPD(HHI_VPU_MEM_PD_REG0),
VPU_MEMPD(HHI_VPU_MEM_PD_REG1),
@@ -201,7 +225,27 @@ static bool pwrc_ee_get_power(struct meson_ee_pwrc_domain *pwrc_domain);
static struct meson_ee_pwrc_domain_desc g12a_pwrc_domains[] = {
[PWRC_G12A_VPU_ID] = VPU_PD("VPU", &g12a_pwrc_vpu, g12a_pwrc_mem_vpu,
pwrc_ee_get_power, 11, 2),
- [PWRC_G12A_ETH_ID] = MEM_PD("ETH", g12a_pwrc_mem_eth),
+ [PWRC_G12A_ETH_ID] = MEM_PD("ETH", meson8_pwrc_mem_eth),
+};
+
+static struct meson_ee_pwrc_domain_desc meson8_pwrc_domains[] = {
+ [PWRC_MESON8_VPU_ID] = VPU_PD("VPU", &meson8_pwrc_vpu,
+ meson8_pwrc_mem_vpu, pwrc_ee_get_power,
+ 0, 1),
+ [PWRC_MESON8_ETHERNET_MEM_ID] = MEM_PD("ETHERNET_MEM",
+ meson8_pwrc_mem_eth),
+ [PWRC_MESON8_AUDIO_DSP_MEM_ID] = MEM_PD("AUDIO_DSP_MEM",
+ meson8_pwrc_audio_dsp_mem),
+};
+
+static struct meson_ee_pwrc_domain_desc meson8b_pwrc_domains[] = {
+ [PWRC_MESON8_VPU_ID] = VPU_PD("VPU", &meson8_pwrc_vpu,
+ meson8_pwrc_mem_vpu, pwrc_ee_get_power,
+ 11, 1),
+ [PWRC_MESON8_ETHERNET_MEM_ID] = MEM_PD("ETHERNET_MEM",
+ meson8_pwrc_mem_eth),
+ [PWRC_MESON8_AUDIO_DSP_MEM_ID] = MEM_PD("AUDIO_DSP_MEM",
+ meson8_pwrc_audio_dsp_mem),
};
static struct meson_ee_pwrc_domain_desc sm1_pwrc_domains[] = {
@@ -216,7 +260,7 @@ static struct meson_ee_pwrc_domain_desc sm1_pwrc_domains[] = {
[PWRC_SM1_GE2D_ID] = TOP_PD("GE2D", &sm1_pwrc_ge2d, sm1_pwrc_mem_ge2d,
pwrc_ee_get_power),
[PWRC_SM1_AUDIO_ID] = MEM_PD("AUDIO", sm1_pwrc_mem_audio),
- [PWRC_SM1_ETH_ID] = MEM_PD("ETH", g12a_pwrc_mem_eth),
+ [PWRC_SM1_ETH_ID] = MEM_PD("ETH", meson8_pwrc_mem_eth),
};
struct meson_ee_pwrc_domain {
@@ -470,12 +514,34 @@ static struct meson_ee_pwrc_domain_data meson_ee_g12a_pwrc_data = {
.domains = g12a_pwrc_domains,
};
+static struct meson_ee_pwrc_domain_data meson_ee_m8_pwrc_data = {
+ .count = ARRAY_SIZE(meson8_pwrc_domains),
+ .domains = meson8_pwrc_domains,
+};
+
+static struct meson_ee_pwrc_domain_data meson_ee_m8b_pwrc_data = {
+ .count = ARRAY_SIZE(meson8b_pwrc_domains),
+ .domains = meson8b_pwrc_domains,
+};
+
static struct meson_ee_pwrc_domain_data meson_ee_sm1_pwrc_data = {
.count = ARRAY_SIZE(sm1_pwrc_domains),
.domains = sm1_pwrc_domains,
};
static const struct of_device_id meson_ee_pwrc_match_table[] = {
+ {
+ .compatible = "amlogic,meson8-pwrc",
+ .data = &meson_ee_m8_pwrc_data,
+ },
+ {
+ .compatible = "amlogic,meson8b-pwrc",
+ .data = &meson_ee_m8b_pwrc_data,
+ },
+ {
+ .compatible = "amlogic,meson8m2-pwrc",
+ .data = &meson_ee_m8b_pwrc_data,
+ },
{
.compatible = "amlogic,meson-g12a-pwrc",
.data = &meson_ee_g12a_pwrc_data,
--
2.26.1
Powered by blists - more mailing lists