linux-kernel - Re: [PATCH net-next 2/3] net: phy: add Broadcom BCM54140 support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ef747b543bd8dd34aea89a6243de8da4@walle.cc>
Date:   Fri, 17 Apr 2020 21:50:49 +0200
From:   Michael Walle <michael@...le.cc>
To:     Andrew Lunn <andrew@...n.ch>
Cc:     linux-hwmon@...r.kernel.org, linux-kernel@...r.kernel.org,
        netdev@...r.kernel.org, Jean Delvare <jdelvare@...e.com>,
        Guenter Roeck <linux@...ck-us.net>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        "David S . Miller" <davem@...emloft.net>
Subject: Re: [PATCH net-next 2/3] net: phy: add Broadcom BCM54140 support

Hi Andrew,

Am 2020-04-17 21:39, schrieb Andrew Lunn:
> On Fri, Apr 17, 2020 at 09:28:57PM +0200, Michael Walle wrote:
> 
>> +static int bcm54140_get_base_addr_and_port(struct phy_device *phydev)
>> +{
>> +	struct bcm54140_phy_priv *priv = phydev->priv;
>> +	struct mii_bus *bus = phydev->mdio.bus;
>> +	int addr, min_addr, max_addr;
>> +	int step = 1;
>> +	u32 phy_id;
>> +	int tmp;
>> +
>> +	min_addr = phydev->mdio.addr;
>> +	max_addr = phydev->mdio.addr;
>> +	addr = phydev->mdio.addr;
>> +
>> +	/* We scan forward and backwards and look for PHYs which have the
>> +	 * same phy_id like we do. Step 1 will scan forward, step 2
>> +	 * backwards. Once we are finished, we have a min_addr and
>> +	 * max_addr which resembles the range of PHY addresses of the same
>> +	 * type of PHY. There is one caveat; there may be many PHYs of
>> +	 * the same type, but we know that each PHY takes exactly 4
>> +	 * consecutive addresses. Therefore we can deduce our offset
>> +	 * to the base address of this quad PHY.
>> +	 */
> 
> Hi Michael
> 
> How much flexibility is there in setting the base address using
> strapping etc? Is it limited to a multiple of 4?

You can just set the base address to any address. Then the following
addresses are used:
   base, base + 1, base + 2, base + 3, (base + 4)*

It is not specified what happens if you set the base so that it would
overflow. I guess that is a invalid strapping.

* (base + 4) is some kind of special PHY address which maps some kind
of moving window to a QSGMII address space. It is enabled by default,
could be disabled in software, but it doesn't share the same PHY id
for which this scans.

So yes, if you look at the addresses and the phy ids, there are
always 4 of this.

-michael