linux-kernel - Re: [PATCH v5 1/8] drm/fourcc: Add modifier definitions for describing Amlogic Video Framebuffer Compression

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200417150729.GP3456981@phenom.ffwll.local>
Date:   Fri, 17 Apr 2020 17:07:29 +0200
From:   Daniel Vetter <daniel@...ll.ch>
To:     Neil Armstrong <narmstrong@...libre.com>
Cc:     daniel@...ll.ch, dri-devel@...ts.freedesktop.org,
        linux-amlogic@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Kevin Hilman <khilman@...libre.com>
Subject: Re: [PATCH v5 1/8] drm/fourcc: Add modifier definitions for
 describing Amlogic Video Framebuffer Compression

On Thu, Apr 16, 2020 at 05:24:53PM +0200, Neil Armstrong wrote:
> Amlogic uses a proprietary lossless image compression protocol and format
> for their hardware video codec accelerators, either video decoders or
> video input encoders.
> 
> It considerably reduces memory bandwidth while writing and reading
> frames in memory.
> 
> The underlying storage is considered to be 3 components, 8bit or 10-bit
> per component, YCbCr 420, single plane :
> - DRM_FORMAT_YUV420_8BIT
> - DRM_FORMAT_YUV420_10BIT
> 
> This modifier will be notably added to DMA-BUF frames imported from the V4L2
> Amlogic VDEC decoder.
> 
> This introduces the basic layout composed of:
> - a body content organized in 64x32 superblocks with 4096 bytes per
>   superblock in default mode.
> - a 32 bytes per 128x64 header block
> 
> This layout is tranferrable between Amlogic SoCs supporting this modifier.
> 
> Tested-by: Kevin Hilman <khilman@...libre.com>
> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
> ---
>  include/uapi/drm/drm_fourcc.h | 39 +++++++++++++++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
> 
> diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h
> index 8bc0b31597d8..a1b163a5641f 100644
> --- a/include/uapi/drm/drm_fourcc.h
> +++ b/include/uapi/drm/drm_fourcc.h
> @@ -309,6 +309,7 @@ extern "C" {
>  #define DRM_FORMAT_MOD_VENDOR_BROADCOM 0x07
>  #define DRM_FORMAT_MOD_VENDOR_ARM     0x08
>  #define DRM_FORMAT_MOD_VENDOR_ALLWINNER 0x09
> +#define DRM_FORMAT_MOD_VENDOR_AMLOGIC 0x0a
>  
>  /* add more to the end as needed */
>  
> @@ -804,6 +805,44 @@ extern "C" {
>   */
>  #define DRM_FORMAT_MOD_ALLWINNER_TILED fourcc_mod_code(ALLWINNER, 1)
>  
> +/*
> + * Amlogic Video Framebuffer Compression modifiers
> + *
> + * Amlogic uses a proprietary lossless image compression protocol and format
> + * for their hardware video codec accelerators, either video decoders or
> + * video input encoders.
> + *
> + * It considerably reduces memory bandwidth while writing and reading
> + * frames in memory.
> + *
> + * The underlying storage is considered to be 3 components, 8bit or 10-bit
> + * per component YCbCr 420, single plane :
> + * - DRM_FORMAT_YUV420_8BIT
> + * - DRM_FORMAT_YUV420_10BIT
> + *
> + * The first 8 bits of the mode defines the layout, then the following 8 bits
> + * defines the options changing the layout.

None of the modifiers you're doing seem to have these other 8 bits
defined anywhere. And it's not encoded in your modifiers. Can't we just
enumerate the ones we have/need and done?

> + *
> + * Not all combinations are valid, and different SoCs may support different
> + * combinations of layout and options.
> + */
> +#define DRM_FORMAT_MOD_AMLOGIC_FBC(__modes) fourcc_mod_code(AMLOGIC, __modes)
> +
> +/* Amlogic FBC Layouts */
> +#define DRM_FORMAT_MOD_AMLOGIC_FBC_LAYOUT_MASK		(0xf << 0)
> +
> +/*
> + * Amlogic FBC Basic Layout
> + *
> + * The basic layout is composed of:
> + * - a body content organized in 64x32 superblocks with 4096 bytes per
> + *   superblock in default mode.
> + * - a 32 bytes per 128x64 header block
> + *
> + * This layout is transferrable between Amlogic SoCs supporting this modifier.
> + */
> +#define DRM_FORMAT_MOD_AMLOGIC_FBC_LAYOUT_BASIC		(1ULL << 0)

This is kinda confusing, since this isn't actually the modifier, but the
mode of the modifer. Generally what we do is only define the former, with
maybe some macros to extract stuff.

To make this more mistake-proof I'd only define the full modifier code.
Definitely don't add a #define with the DRM_FORMAT_MOD_ prefix which isn't
actually a full modifier code.
-Daniel

> +
>  #if defined(__cplusplus)
>  }
>  #endif
> -- 
> 2.22.0
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch