| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200418105432.11233-2-calvin.johnson@oss.nxp.com>
Date: Sat, 18 Apr 2020 16:24:31 +0530
From: Calvin Johnson <calvin.johnson@....nxp.com>
To: linux.cj@...il.com, Jeremy Linton <jeremy.linton@....com>,
Andrew Lunn <andrew@...n.ch>,
Andy Shevchenko <andy.shevchenko@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Russell King - ARM Linux admin <linux@...linux.org.uk>,
Cristi Sovaiala <cristian.sovaiala@....com>,
Florin Laurentiu Chiculita <florinlaurentiu.chiculita@....com>,
Ioana Ciornei <ioana.ciornei@....com>,
Madalin Bucur <madalin.bucur@....nxp.com>
Cc: netdev@...r.kernel.org, Laurentiu Tudor <laurentiu.tudor@....com>,
linux-acpi@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Diana Madalina Craciun <diana.craciun@....com>,
linux-kernel@...r.kernel.org, Varun Sethi <V.Sethi@....com>,
Marcin Wojtas <mw@...ihalf.com>,
"Rajesh V . Bikkina" <rajesh.bikkina@....com>,
Pankaj Bansal <pankaj.bansal@....com>,
Makarand Pawagi <makarand.pawagi@....com>,
Calvin Johnson <calvin.johnson@....nxp.com>,
"David S. Miller" <davem@...emloft.net>
Subject: [RFC net-next PATCH v2 1/2] net/fsl: add ACPI support for mdio bus
Add ACPI support for MDIO bus registration while maintaining
the existing DT support.
Extract phy_id using xgmac_get_phy_id() from the compatible
string passed through the ACPI table.
Use ACPI property phy-channel to provide ID of the phy.
Use xgmac_mdiobus_register_phy() to register PHY devices
on the MDIO bus.
Signed-off-by: Calvin Johnson <calvin.johnson@....nxp.com>
---
Changes in v2:
- Use IS_ERR_OR_NULL for priv->mdio_base instead of plain NULL check
- Add missing terminator of struct acpi_device_id
- Use device_property_read_bool and avoid redundancy
- Add helper functions xgmac_get_phy_id() and xgmac_mdiobus_register_phy()
drivers/net/ethernet/freescale/xgmac_mdio.c | 143 +++++++++++++++++---
1 file changed, 121 insertions(+), 22 deletions(-)
diff --git a/drivers/net/ethernet/freescale/xgmac_mdio.c b/drivers/net/ethernet/freescale/xgmac_mdio.c
index c82c85ef5fb3..d3480c0e0cf5 100644
--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -2,6 +2,7 @@
* QorIQ 10G MDIO Controller
*
* Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2019 NXP
*
* Authors: Andy Fleming <afleming@...escale.com>
* Timur Tabi <timur@...escale.com>
@@ -11,6 +12,7 @@
* kind, whether express or implied.
*/
+#include <linux/property.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
@@ -20,6 +22,7 @@
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/of_mdio.h>
+#include <linux/acpi.h>
/* Number of microseconds to wait for a register to respond */
#define TIMEOUT 1000
@@ -241,18 +244,81 @@ static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
return value;
}
+/* Extract the clause 22 phy ID from the compatible string of the form
+ * ethernet-phy-idAAAA.BBBB
+ */
+static int xgmac_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id)
+{
+ const char *cp;
+ unsigned int upper, lower;
+ int ret;
+
+ ret = fwnode_property_read_string(fwnode, "compatible", &cp);
+ if (!ret) {
+ if (sscanf(cp, "ethernet-phy-id%4x.%4x",
+ &upper, &lower) == 2) {
+ *phy_id = ((upper & 0xFFFF) << 16) | (lower & 0xFFFF);
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
+static int xgmac_mdiobus_register_phy(struct mii_bus *bus,
+ struct fwnode_handle *child, u32 addr)
+{
+ struct phy_device *phy;
+ bool is_c45 = false;
+ int rc;
+ const char *cp;
+ u32 phy_id;
+
+ fwnode_property_read_string(child, "compatible", &cp);
+ if (!strcmp(cp, "ethernet-phy-ieee802.3-c45"))
+ is_c45 = true;
+
+ if (!is_c45 && !xgmac_get_phy_id(child, &phy_id))
+ phy = phy_device_create(bus, addr, phy_id, 0, NULL);
+ else
+ phy = get_phy_device(bus, addr, is_c45);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ phy->irq = bus->irq[addr];
+
+ /* Associate the fwnode with the device structure so it
+ * can be looked up later.
+ */
+ phy->mdio.dev.fwnode = child;
+
+ /* All data is now stored in the phy struct, so register it */
+ rc = phy_device_register(phy);
+ if (rc) {
+ phy_device_free(phy);
+ fwnode_handle_put(child);
+ return rc;
+ }
+
+ dev_dbg(&bus->dev, "registered phy at address %i\n", addr);
+
+ return 0;
+}
+
static int xgmac_mdio_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct mii_bus *bus;
- struct resource res;
+ struct resource *res;
struct mdio_fsl_priv *priv;
int ret;
+ struct fwnode_handle *fwnode;
+ struct fwnode_handle *child;
+ int addr, rc;
- ret = of_address_to_resource(np, 0, &res);
- if (ret) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
dev_err(&pdev->dev, "could not obtain address\n");
- return ret;
+ return -ENODEV;
}
bus = mdiobus_alloc_size(sizeof(struct mdio_fsl_priv));
@@ -263,25 +329,55 @@ static int xgmac_mdio_probe(struct platform_device *pdev)
bus->read = xgmac_mdio_read;
bus->write = xgmac_mdio_write;
bus->parent = &pdev->dev;
- snprintf(bus->id, MII_BUS_ID_SIZE, "%llx", (unsigned long long)res.start);
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%llx", (unsigned long long)res->start);
/* Set the PHY base address */
priv = bus->priv;
- priv->mdio_base = of_iomap(np, 0);
- if (!priv->mdio_base) {
+ priv->mdio_base = ioremap(res->start, resource_size(res));
+ if (IS_ERR_OR_NULL(priv->mdio_base)) {
ret = -ENOMEM;
goto err_ioremap;
}
- priv->is_little_endian = of_property_read_bool(pdev->dev.of_node,
- "little-endian");
-
- priv->has_a011043 = of_property_read_bool(pdev->dev.of_node,
- "fsl,erratum-a011043");
-
- ret = of_mdiobus_register(bus, np);
- if (ret) {
- dev_err(&pdev->dev, "cannot register MDIO bus\n");
+ priv->is_little_endian = device_property_read_bool(&pdev->dev,
+ "little-endian");
+
+ priv->has_a011043 = device_property_read_bool(&pdev->dev,
+ "fsl,erratum-a011043");
+ if (is_of_node(pdev->dev.fwnode)) {
+ ret = of_mdiobus_register(bus, np);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot register MDIO bus\n");
+ goto err_registration;
+ }
+ } else if (is_acpi_node(pdev->dev.fwnode)) {
+ /* Mask out all PHYs from auto probing. */
+ bus->phy_mask = ~0;
+ ret = mdiobus_register(bus);
+ if (ret) {
+ dev_err(&pdev->dev, "mdiobus register err(%d)\n", ret);
+ return ret;
+ }
+
+ fwnode = pdev->dev.fwnode;
+ /* Loop over the child nodes and register a phy_device for each PHY */
+ fwnode_for_each_child_node(fwnode, child) {
+ fwnode_property_read_u32(child, "phy-channel", &addr);
+
+ if (addr < 0 || addr >= PHY_MAX_ADDR) {
+ dev_err(&bus->dev, "Invalid PHY address %i\n", addr);
+ continue;
+ }
+
+ rc = xgmac_mdiobus_register_phy(bus, child, addr);
+ if (rc == -ENODEV)
+ dev_err(&bus->dev,
+ "MDIO device at address %d is missing.\n",
+ addr);
+ }
+ } else {
+ dev_err(&pdev->dev, "Cannot get cfg data from DT or ACPI\n");
+ ret = -ENXIO;
goto err_registration;
}
@@ -290,8 +386,6 @@ static int xgmac_mdio_probe(struct platform_device *pdev)
return 0;
err_registration:
- iounmap(priv->mdio_base);
-
err_ioremap:
mdiobus_free(bus);
@@ -303,13 +397,12 @@ static int xgmac_mdio_remove(struct platform_device *pdev)
struct mii_bus *bus = platform_get_drvdata(pdev);
mdiobus_unregister(bus);
- iounmap(bus->priv);
mdiobus_free(bus);
return 0;
}
-static const struct of_device_id xgmac_mdio_match[] = {
+static const struct of_device_id xgmac_mdio_of_match[] = {
{
.compatible = "fsl,fman-xmdio",
},
@@ -318,12 +411,18 @@ static const struct of_device_id xgmac_mdio_match[] = {
},
{},
};
-MODULE_DEVICE_TABLE(of, xgmac_mdio_match);
+MODULE_DEVICE_TABLE(of, xgmac_mdio_of_match);
+
+static const struct acpi_device_id xgmac_mdio_acpi_match[] = {
+ {"NXP0006", 0}
+};
+MODULE_DEVICE_TABLE(acpi, xgmac_mdio_acpi_match);
static struct platform_driver xgmac_mdio_driver = {
.driver = {
.name = "fsl-fman_xmdio",
- .of_match_table = xgmac_mdio_match,
+ .of_match_table = xgmac_mdio_of_match,
+ .acpi_match_table = ACPI_PTR(xgmac_mdio_acpi_match),
},
.probe = xgmac_mdio_probe,
.remove = xgmac_mdio_remove,
--
2.17.1
Powered by blists - more mailing lists