| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200418172200.58a10116@archlinux>
Date: Sat, 18 Apr 2020 17:22:00 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Jishnu Prakash <jprakash@...eaurora.org>
Cc: agross@...nel.org, bjorn.andersson@...aro.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
mka@...omium.org, linus.walleij@...aro.org,
Jonathan.Cameron@...wei.com, smohanad@...eaurora.org,
kgunda@...eaurora.org, aghayal@...eaurora.org,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>, linux-iio@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-arm-msm-owner@...r.kernel.org
Subject: Re: [PATCH V2 1/3] iio: adc: Convert the QCOM SPMI ADC bindings to
.yaml format
On Wed, 15 Apr 2020 14:47:44 +0530
Jishnu Prakash <jprakash@...eaurora.org> wrote:
> Convert the adc bindings from .txt to .yaml format.
>
I read patch 2 before this one for some reason but same question applies here
Given we are now enforcing a lot of the values explicitly are we better
off dropping the text description of that. It looks to me like a potential
place to get out of sync given the information is a bit further down.
> Signed-off-by: Jishnu Prakash <jprakash@...eaurora.org>
> ---
> .../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 173 -------------
> .../bindings/iio/adc/qcom,spmi-vadc.yaml | 288 +++++++++++++++++++++
> 2 files changed, 288 insertions(+), 173 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
> create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
> deleted file mode 100644
> index c878768..0000000
> --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
> +++ /dev/null
> @@ -1,173 +0,0 @@
> -Qualcomm's SPMI PMIC ADC
> -
> -- SPMI PMIC voltage ADC (VADC) provides interface to clients to read
> - voltage. The VADC is a 15-bit sigma-delta ADC.
> -- SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read
> - voltage. The VADC is a 16-bit sigma-delta ADC.
> -
> -VADC node:
> -
> -- compatible:
> - Usage: required
> - Value type: <string>
> - Definition: Should contain "qcom,spmi-vadc".
> - Should contain "qcom,spmi-adc5" for PMIC5 ADC driver.
> - Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver.
> - Should contain "qcom,pms405-adc" for PMS405 PMIC
> -
> -- reg:
> - Usage: required
> - Value type: <prop-encoded-array>
> - Definition: VADC base address in the SPMI PMIC register map.
> -
> -- #address-cells:
> - Usage: required
> - Value type: <u32>
> - Definition: Must be one. Child node 'reg' property should define ADC
> - channel number.
> -
> -- #size-cells:
> - Usage: required
> - Value type: <u32>
> - Definition: Must be zero.
> -
> -- #io-channel-cells:
> - Usage: required
> - Value type: <u32>
> - Definition: Must be one. For details about IIO bindings see:
> - Documentation/devicetree/bindings/iio/iio-bindings.txt
> -
> -- interrupts:
> - Usage: optional
> - Value type: <prop-encoded-array>
> - Definition: End of conversion interrupt.
> -
> -Channel node properties:
> -
> -- reg:
> - Usage: required
> - Value type: <u32>
> - Definition: ADC channel number.
> - See include/dt-bindings/iio/qcom,spmi-vadc.h
> -
> -- label:
> - Usage: required for "qcom,spmi-adc5" and "qcom,spmi-adc-rev2"
> - Value type: <empty>
> - Definition: ADC input of the platform as seen in the schematics.
> - For thermistor inputs connected to generic AMUX or GPIO inputs
> - these can vary across platform for the same pins. Hence select
> - the platform schematics name for this channel.
> -
> -- qcom,decimation:
> - Usage: optional
> - Value type: <u32>
> - Definition: This parameter is used to decrease ADC sampling rate.
> - Quicker measurements can be made by reducing decimation ratio.
> - - For compatible property "qcom,spmi-vadc", valid values are
> - 512, 1024, 2048, 4096. If property is not found, default value
> - of 512 will be used.
> - - For compatible property "qcom,spmi-adc5", valid values are 250, 420
> - and 840. If property is not found, default value of 840 is used.
> - - For compatible property "qcom,spmi-adc-rev2", valid values are 256,
> - 512 and 1024. If property is not present, default value is 1024.
> -
> -- qcom,pre-scaling:
> - Usage: optional
> - Value type: <u32 array>
> - Definition: Used for scaling the channel input signal before the signal is
> - fed to VADC. The configuration for this node is to know the
> - pre-determined ratio and use it for post scaling. Select one from
> - the following options.
> - <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10>
> - If property is not found default value depending on chip will be used.
> -
> -- qcom,ratiometric:
> - Usage: optional
> - Value type: <empty>
> - Definition: Channel calibration type.
> - - For compatible property "qcom,spmi-vadc", if this property is
> - specified VADC will use the VDD reference (1.8V) and GND for
> - channel calibration. If property is not found, channel will be
> - calibrated with 0.625V and 1.25V reference channels, also
> - known as absolute calibration.
> - - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
> - if this property is specified VADC will use the VDD reference
> - (1.875V) and GND for channel calibration. If property is not found,
> - channel will be calibrated with 0V and 1.25V reference channels,
> - also known as absolute calibration.
> -
> -- qcom,hw-settle-time:
> - Usage: optional
> - Value type: <u32>
> - Definition: Time between AMUX getting configured and the ADC starting
> - conversion. The 'hw_settle_time' is an index used from valid values
> - and programmed in hardware to achieve the hardware settling delay.
> - - For compatible property "qcom,spmi-vadc" and "qcom,spmi-adc-rev2",
> - Delay = 100us * (hw_settle_time) for hw_settle_time < 11,
> - and 2ms * (hw_settle_time - 10) otherwise.
> - Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800,
> - 900 us and 1, 2, 4, 6, 8, 10 ms.
> - If property is not found, channel will use 0us.
> - - For compatible property "qcom,spmi-adc5", delay = 15us for
> - value 0, 100us * (value) for values < 11,
> - and 2ms * (value - 10) otherwise.
> - Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 800,
> - 900 us and 1, 2, 4, 6, 8, 10 ms
> - Certain controller digital versions have valid values of
> - 15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms
> - If property is not found, channel will use 15us.
> -
> -- qcom,avg-samples:
> - Usage: optional
> - Value type: <u32>
> - Definition: Number of samples to be used for measurement.
> - Averaging provides the option to obtain a single measurement
> - from the ADC that is an average of multiple samples. The value
> - selected is 2^(value).
> - - For compatible property "qcom,spmi-vadc", valid values
> - are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
> - If property is not found, 1 sample will be used.
> - - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
> - valid values are: 1, 2, 4, 8, 16
> - If property is not found, 1 sample will be used.
> -
> -NOTE:
> -
> -For compatible property "qcom,spmi-vadc" following channels, also known as
> -reference point channels, are used for result calibration and their channel
> -configuration nodes should be defined:
> -VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
> -VADC_GND_REF and VADC_VDD_VADC.
> -
> -Example:
> -
> -#include <dt-bindings/iio/qcom,spmi-vadc.h>
> -#include <linux/irq.h>
> -/* ... */
> -
> - /* VADC node */
> - pmic_vadc: vadc@...0 {
> - compatible = "qcom,spmi-vadc";
> - reg = <0x3100>;
> - interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - #io-channel-cells = <1>;
> - io-channel-ranges;
> -
> - /* Channel node */
> - adc-chan@...C_LR_MUX10_USB_ID {
> - reg = <VADC_LR_MUX10_USB_ID>;
> - qcom,decimation = <512>;
> - qcom,ratiometric;
> - qcom,hw-settle-time = <200>;
> - qcom,avg-samples = <1>;
> - qcom,pre-scaling = <1 3>;
> - };
> - };
> -
> - /* IIO client node */
> - usb {
> - io-channels = <&pmic_vadc VADC_LR_MUX10_USB_ID>;
> - io-channel-names = "vadc";
> - };
> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> new file mode 100644
> index 0000000..8273981
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> @@ -0,0 +1,288 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-vadc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm's SPMI PMIC ADC
> +
> +maintainers:
> + - Andy Gross <agross@...nel.org>
> + - Bjorn Andersson <bjorn.andersson@...aro.org>
> +
> +description: |
> + SPMI PMIC voltage ADC (VADC) provides interface to clients to read
> + voltage. The VADC is a 15-bit sigma-delta ADC.
> + SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read
> + voltage. The VADC is a 16-bit sigma-delta ADC.
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - const: qcom,pms405-adc
> + - const: qcom,spmi-adc-rev2
> +
> + - items:
> + - enum:
> + - qcom,spmi-vadc
> + - qcom,spmi-adc5
> + - qcom,spmi-adc-rev2
> +
> + reg:
> + description: VADC base address in the SPMI PMIC register map
> + maxItems: 1
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + '#io-channel-cells':
> + const: 1
> +
> + interrupts:
> + maxItems: 1
> + description:
> + End of conversion interrupt.
> +
> +required:
> + - compatible
> + - reg
> + - '#address-cells'
> + - '#size-cells'
> + - '#io-channel-cells'
> +
> +patternProperties:
> + "^.*@[0-9a-fx]+$":
> + type: object
> + description: |
> + Represents the external channels which are connected to the ADC.
> + For compatible property "qcom,spmi-vadc" following channels, also known as
> + reference point channels, are used for result calibration and their channel
> + configuration nodes should be defined:
> + VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
> + VADC_GND_REF and VADC_VDD_VADC.
> +
> + properties:
> + reg:
> + description: |
> + ADC channel number.
> + See include/dt-bindings/iio/qcom,spmi-vadc.h
> +
> + label:
> + $ref: /schemas/types.yaml#/definitions/string
> + description: |
> + ADC input of the platform as seen in the schematics.
> + For thermistor inputs connected to generic AMUX or GPIO inputs
> + these can vary across platform for the same pins. Hence select
> + the platform schematics name for this channel.
> +
> + qcom,decimation:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + This parameter is used to decrease ADC sampling rate.
> + Quicker measurements can be made by reducing decimation ratio.
> + - For compatible property "qcom,spmi-vadc", valid values are
> + 512, 1024, 2048, 4096. If property is not found, default value
> + of 512 will be used.
> + - For compatible property "qcom,spmi-adc5", valid values are 250, 420
> + and 840. If property is not found, default value of 840 is used.
> + - For compatible property "qcom,spmi-adc-rev2", valid values are 256,
> + 512 and 1024. If property is not present, default value is 1024.
> +
> + qcom,pre-scaling:
> + description: |
> + Used for scaling the channel input signal before the signal is
> + fed to VADC. The configuration for this node is to know the
> + pre-determined ratio and use it for post scaling. It is a pair of
> + integers, denoting the numerator and denominator of the fraction by which
> + input signal is multiplied. For example, <1 3> indicates the signal is scaled
> + down to 1/3 of its value before ADC measurement. Select one from
> + the following options.
> + <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10>
> + If property is not found default value depending on chip will be used.
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32-array
> + oneOf:
> + - items:
> + - const: 1
> + - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
> +
> + - items:
> + - const: 10
> + - const: 81
> +
> + qcom,ratiometric:
> + description: |
> + Channel calibration type.
> + - For compatible property "qcom,spmi-vadc", if this property is
> + specified VADC will use the VDD reference (1.8V) and GND for
> + channel calibration. If property is not found, channel will be
> + calibrated with 0.625V and 1.25V reference channels, also
> + known as absolute calibration.
> + - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
> + if this property is specified VADC will use the VDD reference (1.875V)
> + and GND for channel calibration. If property is not found, channel
> + will be calibrated with 0V and 1.25V reference channels, also known
> + as absolute calibration.
> + type: boolean
> +
> + qcom,hw-settle-time:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Time between AMUX getting configured and the ADC starting
> + conversion. The 'hw_settle_time' is an index used from valid values
> + and programmed in hardware to achieve the hardware settling delay.
> + - For compatible property "qcom,spmi-vadc" and "qcom,spmi-adc-rev2",
> + Delay = 100us * (hw_settle_time) for hw_settle_time < 11,
> + and 2ms * (hw_settle_time - 10) otherwise.
> + Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800,
> + 900 us and 1, 2, 4, 6, 8, 10 ms.
> + If property is not found, channel will use 0us.
> + - For compatible property "qcom,spmi-adc5", delay = 15us for
> + value 0, 100us * (value) for values < 11,
> + and 2ms * (value - 10) otherwise.
> + Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 800,
> + 900 us and 1, 2, 4, 6, 8, 10 ms
> + Certain controller digital versions have valid values of
> + 15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms
> + If property is not found, channel will use 15us.
> +
> + qcom,avg-samples:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + Number of samples to be used for measurement.
> + Averaging provides the option to obtain a single measurement
> + from the ADC that is an average of multiple samples. The value
> + selected is 2^(value).
> + - For compatible property "qcom,spmi-vadc", valid values
> + are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
> + If property is not found, 1 sample will be used.
> +
> + required:
> + - reg
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: qcom,spmi-vadc
> +
> + then:
> + patternProperties:
> + "^.*@[0-9a-fx]+$":
> + minItems: 4
> + properties:
> + qcom,decimation:
> + items:
> + enum: [ 512, 1024, 2048, 4096 ]
> + default: 512
> +
> + qcom,hw-settle-time:
> + items:
> + enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
> + 4, 6, 8, 10 ]
> + default: 0
> +
> + qcom,avg-samples:
> + items:
> + enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 ]
> + default: 1
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: qcom,spmi-adc-rev2
> +
> + then:
> + patternProperties:
> + "^.*@[0-9a-fx]+$":
> + properties:
> + qcom,decimation:
> + items:
> + enum: [ 256, 512, 1024 ]
> + default: 1024
> +
> + qcom,hw-settle-time:
> + items:
> + enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
> + 4, 6, 8, 10 ]
> + default: 0
> +
> + qcom,avg-samples:
> + items:
> + enum: [ 1, 2, 4, 8, 16 ]
> + default: 1
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: qcom,spmi-adc5
> +
> + then:
> + patternProperties:
> + "^.*@[0-9a-fx]+$":
> + properties:
> + qcom,decimation:
> + items:
> + enum: [ 250, 420, 840 ]
> + default: 840
> +
> + qcom,hw-settle-time:
> + items:
> + enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
> + 4, 6, 8, 10, 16, 32, 64, 128 ]
> + default: 15
> +
> + qcom,avg-samples:
> + items:
> + enum: [ 1, 2, 4, 8, 16 ]
> + default: 1
> +
> +examples:
> + - |
> + spmi_bus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + /* VADC node */
> + pmic_vadc: adc@...0 {
> + compatible = "qcom,spmi-vadc";
> + reg = <0x3100>;
> + interrupts = <0x0 0x31 0x0 0x1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #io-channel-cells = <1>;
> + io-channel-ranges;
> +
> + /* Channel node */
> + adc-chan@...9 {
> + reg = <0x39>;
> + qcom,decimation = <512>;
> + qcom,ratiometric;
> + qcom,hw-settle-time = <200>;
> + qcom,avg-samples = <1>;
> + qcom,pre-scaling = <1 3>;
> + };
> +
> + adc-chan@0x9 {
> + reg = <0x9>;
> + };
> +
> + adc-chan@0xa {
> + reg = <0xa>;
> + };
> +
> + adc-chan@0xe {
> + reg = <0xe>;
> + };
> +
> + adc-chan@0xf {
> + reg = <0xf>;
> + };
> + };
> + };
Powered by blists - more mailing lists