[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200419104404.j4e5gxdn2duvmu6s@yavin.dot.cyphar.com>
Date: Sun, 19 Apr 2020 20:44:04 +1000
From: Aleksa Sarai <cyphar@...har.com>
To: Josh Triplett <josh@...htriplett.org>
Cc: linux-fsdevel@...r.kernel.org, linux-kernel@...r.kernel.org,
io-uring@...r.kernel.org, linux-arch@...r.kernel.org,
Alexander Viro <viro@...iv.linux.org.uk>,
Arnd Bergmann <arnd@...db.de>, Jens Axboe <axboe@...nel.dk>
Subject: Re: [PATCH v4 2/3] fs: openat2: Extend open_how to allow
userspace-selected fds
On 2020-04-13, Josh Triplett <josh@...htriplett.org> wrote:
> Inspired by the X protocol's handling of XIDs, allow userspace to select
> the file descriptor opened by openat2, so that it can use the resulting
> file descriptor in subsequent system calls without waiting for the
> response to openat2.
>
> In io_uring, this allows sequences like openat2/read/close without
> waiting for the openat2 to complete. Multiple such sequences can
> overlap, as long as each uses a distinct file descriptor.
I'm not sure I understand this explanation -- how can you trigger a
syscall with an fd that hasn't yet been registered (unless you're just
hoping the race goes in your favour)?
> Add a new O_SPECIFIC_FD open flag to enable this behavior, only accepted
> by openat2 for now (ignored by open/openat like all unknown flags). Add
> an fd field to struct open_how (along with appropriate padding, and
> verify that the padding is 0 to allow replacing the padding with a field
> in the future).
>
> The file table has a corresponding new function
> get_specific_unused_fd_flags, which gets the specified file descriptor
> if O_SPECIFIC_FD is set (and the fd isn't -1); otherwise it falls back
> to get_unused_fd_flags, to simplify callers.
>
> The specified file descriptor must not already be open; if it is,
> get_specific_unused_fd_flags will fail with -EBUSY. This helps catch
> userspace errors.
>
> When O_SPECIFIC_FD is set, and fd is not -1, openat2 will use the
> specified file descriptor rather than finding the lowest available one.
I still don't like that you can enable this feature with O_SPECIFIC_FD
but then disable it by specifying fd as -1. I understand why this is
needed for pipe2() and socketpair() and that's totally fine, but I don't
think it makes sense for openat2() or other interfaces where there's
only one fd being returned -- what does it mean to say "give me a
specific fd, but actually I don't care what it is"?
I know this is a trade-off between consistency of O_SPECIFIC_FD
interfaces and having wart-less interfaces for each syscall, but I don't
think it breaks consistency to say "syscalls that only give you one fd
don't have a second way of disabling the feature -- just don't pass
O_SPECIFIC_FD".
> Test program:
>
> #include <err.h>
> #include <fcntl.h>
> #include <stdio.h>
> #include <unistd.h>
>
> int main(void)
> {
> struct open_how how = {
> .flags = O_RDONLY | O_SPECIFIC_FD,
> .fd = 42
> };
> int fd = openat2(AT_FDCWD, "/dev/null", &how, sizeof(how));
> if (fd < 0)
> err(1, "openat2");
> printf("fd=%d\n", fd); // prints fd=42
> return 0;
> }
>
> Signed-off-by: Josh Triplett <josh@...htriplett.org>
> ---
> fs/fcntl.c | 2 +-
> fs/file.c | 39 +++++++++++++++++++
> fs/io_uring.c | 3 +-
> fs/open.c | 8 +++-
> include/linux/fcntl.h | 5 ++-
> include/linux/file.h | 3 ++
> include/uapi/asm-generic/fcntl.h | 4 ++
> include/uapi/linux/openat2.h | 3 ++
> tools/testing/selftests/openat2/helpers.c | 2 +-
> tools/testing/selftests/openat2/helpers.h | 21 +++++++---
> .../testing/selftests/openat2/openat2_test.c | 29 +++++++++++++-
> 11 files changed, 105 insertions(+), 14 deletions(-)
>
> diff --git a/fs/fcntl.c b/fs/fcntl.c
> index 2e4c0fa2074b..0357ad667563 100644
> --- a/fs/fcntl.c
> +++ b/fs/fcntl.c
> @@ -1033,7 +1033,7 @@ static int __init fcntl_init(void)
> * Exceptions: O_NONBLOCK is a two bit define on parisc; O_NDELAY
> * is defined as O_NONBLOCK on some platforms and not on others.
> */
> - BUILD_BUG_ON(21 - 1 /* for O_RDONLY being 0 */ !=
> + BUILD_BUG_ON(22 - 1 /* for O_RDONLY being 0 */ !=
> HWEIGHT32(
> (VALID_OPEN_FLAGS & ~(O_NONBLOCK | O_NDELAY)) |
> __FMODE_EXEC | __FMODE_NONOTIFY));
> diff --git a/fs/file.c b/fs/file.c
> index ba06140d89af..0674c3a2d3a5 100644
> --- a/fs/file.c
> +++ b/fs/file.c
> @@ -567,6 +567,45 @@ void put_unused_fd(unsigned int fd)
>
> EXPORT_SYMBOL(put_unused_fd);
>
> +int __get_specific_unused_fd_flags(unsigned int fd, unsigned int flags,
> + unsigned long nofile)
> +{
> + int ret;
> + struct fdtable *fdt;
> + struct files_struct *files = current->files;
> +
> + if (!(flags & O_SPECIFIC_FD) || fd == UINT_MAX)
> + return __get_unused_fd_flags(flags, nofile);
> +
> + if (fd >= nofile)
> + return -EBADF;
> +
> + spin_lock(&files->file_lock);
> + ret = expand_files(files, fd);
> + if (unlikely(ret < 0))
> + goto out_unlock;
> + fdt = files_fdtable(files);
> + if (fdt->fd[fd]) {
> + ret = -EBUSY;
> + goto out_unlock;
> + }
> + __set_open_fd(fd, fdt);
> + if (flags & O_CLOEXEC)
> + __set_close_on_exec(fd, fdt);
> + else
> + __clear_close_on_exec(fd, fdt);
> + ret = fd;
> +
> +out_unlock:
> + spin_unlock(&files->file_lock);
> + return ret;
> +}
> +
> +int get_specific_unused_fd_flags(unsigned int fd, unsigned int flags)
> +{
> + return __get_specific_unused_fd_flags(fd, flags, rlimit(RLIMIT_NOFILE));
> +}
> +
> /*
> * Install a file pointer in the fd array.
> *
> diff --git a/fs/io_uring.c b/fs/io_uring.c
> index 358f97be9c7b..4a69e1daf3fe 100644
> --- a/fs/io_uring.c
> +++ b/fs/io_uring.c
> @@ -2997,7 +2997,8 @@ static int io_openat2(struct io_kiocb *req, bool force_nonblock)
> if (ret)
> goto err;
>
> - ret = __get_unused_fd_flags(req->open.how.flags, req->open.nofile);
> + ret = __get_specific_unused_fd_flags(req->open.how.fd,
> + req->open.how.flags, req->open.nofile);
> if (ret < 0)
> goto err;
>
> diff --git a/fs/open.c b/fs/open.c
> index 719b320ede52..c1c2dd2d408d 100644
> --- a/fs/open.c
> +++ b/fs/open.c
> @@ -962,6 +962,8 @@ inline struct open_how build_open_how(int flags, umode_t mode)
> .mode = mode & S_IALLUGO,
> };
>
> + /* O_SPECIFIC_FD doesn't work in open calls that use build_open_how. */
> + how.flags &= ~O_SPECIFIC_FD;
> /* O_PATH beats everything else. */
> if (how.flags & O_PATH)
> how.flags &= O_PATH_FLAGS;
> @@ -989,6 +991,10 @@ inline int build_open_flags(const struct open_how *how, struct open_flags *op)
> return -EINVAL;
> if (how->resolve & ~VALID_RESOLVE_FLAGS)
> return -EINVAL;
> + if (how->pad != 0)
> + return -EINVAL;
> + if (!(flags & O_SPECIFIC_FD) && how->fd != 0)
> + return -EINVAL;
>
> /* Deal with the mode. */
> if (WILL_CREATE(flags)) {
> @@ -1143,7 +1149,7 @@ static long do_sys_openat2(int dfd, const char __user *filename,
> if (IS_ERR(tmp))
> return PTR_ERR(tmp);
>
> - fd = get_unused_fd_flags(how->flags);
> + fd = get_specific_unused_fd_flags(how->fd, how->flags);
> if (fd >= 0) {
> struct file *f = do_filp_open(dfd, tmp, &op);
> if (IS_ERR(f)) {
> diff --git a/include/linux/fcntl.h b/include/linux/fcntl.h
> index 7bcdcf4f6ab2..728849bcd8fa 100644
> --- a/include/linux/fcntl.h
> +++ b/include/linux/fcntl.h
> @@ -10,7 +10,7 @@
> (O_RDONLY | O_WRONLY | O_RDWR | O_CREAT | O_EXCL | O_NOCTTY | O_TRUNC | \
> O_APPEND | O_NDELAY | O_NONBLOCK | O_NDELAY | __O_SYNC | O_DSYNC | \
> FASYNC | O_DIRECT | O_LARGEFILE | O_DIRECTORY | O_NOFOLLOW | \
> - O_NOATIME | O_CLOEXEC | O_PATH | __O_TMPFILE)
> + O_NOATIME | O_CLOEXEC | O_PATH | __O_TMPFILE | O_SPECIFIC_FD)
>
> /* List of all valid flags for the how->upgrade_mask argument: */
> #define VALID_UPGRADE_FLAGS \
> @@ -23,7 +23,8 @@
>
> /* List of all open_how "versions". */
> #define OPEN_HOW_SIZE_VER0 24 /* sizeof first published struct */
> -#define OPEN_HOW_SIZE_LATEST OPEN_HOW_SIZE_VER0
> +#define OPEN_HOW_SIZE_VER1 32 /* added fd and pad */
> +#define OPEN_HOW_SIZE_LATEST OPEN_HOW_SIZE_VER1
>
> #ifndef force_o_largefile
> #define force_o_largefile() (!IS_ENABLED(CONFIG_ARCH_32BIT_OFF_T))
> diff --git a/include/linux/file.h b/include/linux/file.h
> index b67986f818d2..a63301864a36 100644
> --- a/include/linux/file.h
> +++ b/include/linux/file.h
> @@ -87,6 +87,9 @@ extern void set_close_on_exec(unsigned int fd, int flag);
> extern bool get_close_on_exec(unsigned int fd);
> extern int __get_unused_fd_flags(unsigned flags, unsigned long nofile);
> extern int get_unused_fd_flags(unsigned flags);
> +extern int __get_specific_unused_fd_flags(unsigned int fd, unsigned int flags,
> + unsigned long nofile);
> +extern int get_specific_unused_fd_flags(unsigned int fd, unsigned int flags);
> extern void put_unused_fd(unsigned int fd);
> extern unsigned int increase_min_fd(unsigned int num);
>
> diff --git a/include/uapi/asm-generic/fcntl.h b/include/uapi/asm-generic/fcntl.h
> index 9dc0bf0c5a6e..d3de5b8b3955 100644
> --- a/include/uapi/asm-generic/fcntl.h
> +++ b/include/uapi/asm-generic/fcntl.h
> @@ -89,6 +89,10 @@
> #define __O_TMPFILE 020000000
> #endif
>
> +#ifndef O_SPECIFIC_FD
> +#define O_SPECIFIC_FD 01000000000 /* open as specified fd */
> +#endif
> +
> /* a horrid kludge trying to make sure that this will fail on old kernels */
> #define O_TMPFILE (__O_TMPFILE | O_DIRECTORY)
> #define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT)
> diff --git a/include/uapi/linux/openat2.h b/include/uapi/linux/openat2.h
> index 58b1eb711360..63974a276fb2 100644
> --- a/include/uapi/linux/openat2.h
> +++ b/include/uapi/linux/openat2.h
> @@ -15,11 +15,14 @@
> * @flags: O_* flags.
> * @mode: O_CREAT/O_TMPFILE file mode.
> * @resolve: RESOLVE_* flags.
> + * @fd: Specific file descriptor to use, for O_SPECIFIC_FD.
> */
> struct open_how {
> __u64 flags;
> __u64 mode;
> __u64 resolve;
> + __u32 fd;
> + __u32 pad; /* Must be 0 in the current version */
> };
>
> /* how->resolve flags for openat2(2). */
> diff --git a/tools/testing/selftests/openat2/helpers.c b/tools/testing/selftests/openat2/helpers.c
> index 5074681ffdc9..b6533f0b1124 100644
> --- a/tools/testing/selftests/openat2/helpers.c
> +++ b/tools/testing/selftests/openat2/helpers.c
> @@ -98,7 +98,7 @@ void __attribute__((constructor)) init(void)
> struct open_how how = {};
> int fd;
>
> - BUILD_BUG_ON(sizeof(struct open_how) != OPEN_HOW_SIZE_VER0);
> + BUILD_BUG_ON(sizeof(struct open_how) != OPEN_HOW_SIZE_VER1);
>
> /* Check openat2(2) support. */
> fd = sys_openat2(AT_FDCWD, ".", &how);
> diff --git a/tools/testing/selftests/openat2/helpers.h b/tools/testing/selftests/openat2/helpers.h
> index a6ea27344db2..b7dea87c17b9 100644
> --- a/tools/testing/selftests/openat2/helpers.h
> +++ b/tools/testing/selftests/openat2/helpers.h
> @@ -24,28 +24,37 @@
> #endif /* SYS_openat2 */
>
> /*
> - * Arguments for how openat2(2) should open the target path. If @resolve is
> - * zero, then openat2(2) operates very similarly to openat(2).
> + * Arguments for how openat2(2) should open the target path. If only @flags and
> + * @mode are non-zero, then openat2(2) operates very similarly to openat(2).
> *
> - * However, unlike openat(2), unknown bits in @flags result in -EINVAL rather
> - * than being silently ignored. @mode must be zero unless one of {O_CREAT,
> - * O_TMPFILE} are set.
> + * However, unlike openat(2), unknown or invalid bits in @flags result in
> + * -EINVAL rather than being silently ignored. @mode must be zero unless one of
> + * {O_CREAT, O_TMPFILE} are set.
> *
> * @flags: O_* flags.
> * @mode: O_CREAT/O_TMPFILE file mode.
> * @resolve: RESOLVE_* flags.
> + * @fd: Specific file descriptor to use, for O_SPECIFIC_FD.
> */
> struct open_how {
> __u64 flags;
> __u64 mode;
> __u64 resolve;
> + __u32 fd;
> + __u32 pad; /* Must be 0 in the current version */
Small nit: This field should be called __padding to make it more
explicit it's something internal and shouldn't be looked at by
userspace. And the comment should just be "must be zeroed".
> };
>
> +/* List of all open_how "versions". */
> #define OPEN_HOW_SIZE_VER0 24 /* sizeof first published struct */
> -#define OPEN_HOW_SIZE_LATEST OPEN_HOW_SIZE_VER0
> +#define OPEN_HOW_SIZE_VER1 32 /* added fd and pad */
> +#define OPEN_HOW_SIZE_LATEST OPEN_HOW_SIZE_VER1
>
> bool needs_openat2(const struct open_how *how);
>
> +#ifndef O_SPECIFIC_FD
> +#define O_SPECIFIC_FD 01000000000
> +#endif
> +
> #ifndef RESOLVE_IN_ROOT
> /* how->resolve flags for openat2(2). */
> #define RESOLVE_NO_XDEV 0x01 /* Block mount-point crossings
> diff --git a/tools/testing/selftests/openat2/openat2_test.c b/tools/testing/selftests/openat2/openat2_test.c
> index b386367c606b..cf21a83c70c9 100644
> --- a/tools/testing/selftests/openat2/openat2_test.c
> +++ b/tools/testing/selftests/openat2/openat2_test.c
> @@ -40,7 +40,7 @@ struct struct_test {
> int err;
> };
>
> -#define NUM_OPENAT2_STRUCT_TESTS 7
> +#define NUM_OPENAT2_STRUCT_TESTS 8
> #define NUM_OPENAT2_STRUCT_VARIATIONS 13
>
> void test_openat2_struct(void)
> @@ -52,6 +52,9 @@ void test_openat2_struct(void)
> { .name = "normal struct",
> .arg.inner.flags = O_RDONLY,
> .size = sizeof(struct open_how) },
> + { .name = "v0 struct",
> + .arg.inner.flags = O_RDONLY,
> + .size = OPEN_HOW_SIZE_VER0 },
> /* Bigger struct, with zeroed out end. */
> { .name = "bigger struct (zeroed out)",
> .arg.inner.flags = O_RDONLY,
> @@ -155,7 +158,7 @@ struct flag_test {
> int err;
> };
>
> -#define NUM_OPENAT2_FLAG_TESTS 23
> +#define NUM_OPENAT2_FLAG_TESTS 29
>
> void test_openat2_flags(void)
> {
> @@ -223,6 +226,24 @@ void test_openat2_flags(void)
> { .name = "invalid how.resolve and O_PATH",
> .how.flags = O_PATH,
> .how.resolve = 0x1337, .err = -EINVAL },
> +
> + /* O_SPECIFIC_FD tests */
> + { .name = "O_SPECIFIC_FD",
> + .how.flags = O_RDONLY | O_SPECIFIC_FD, .how.fd = 42 },
> + { .name = "O_SPECIFIC_FD if fd exists",
> + .how.flags = O_RDONLY | O_SPECIFIC_FD, .how.fd = 2,
> + .err = -EBUSY },
> + { .name = "O_SPECIFIC_FD with fd -1",
> + .how.flags = O_RDONLY | O_SPECIFIC_FD, .how.fd = -1 },
> + { .name = "fd without O_SPECIFIC_FD",
> + .how.flags = O_RDONLY, .how.fd = 42,
> + .err = -EINVAL },
> + { .name = "fd -1 without O_SPECIFIC_FD",
> + .how.flags = O_RDONLY, .how.fd = -1,
> + .err = -EINVAL },
> + { .name = "existing fd without O_SPECIFIC_FD",
> + .how.flags = O_RDONLY, .how.fd = 2,
> + .err = -EINVAL },
It would be good to add a test to make sure that a non-zero value of
how->__padding also gives -EINVAL.
> };
>
> BUILD_BUG_ON(ARRAY_LEN(tests) != NUM_OPENAT2_FLAG_TESTS);
> @@ -268,6 +289,10 @@ void test_openat2_flags(void)
> if (!(test->how.flags & O_LARGEFILE))
> fdflags &= ~O_LARGEFILE;
> failed |= (fdflags != test->how.flags);
> +
> + if (test->how.flags & O_SPECIFIC_FD
> + && test->how.fd != -1)
> + failed |= (fd != test->how.fd);
> }
>
> if (failed) {
> --
> 2.26.0
>
--
Aleksa Sarai
Senior Software Engineer (Containers)
SUSE Linux GmbH
<https://www.cyphar.com/>
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists