[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1587417656-48078-1-git-send-email-venkateshwar.rao.gannavarapu@xilinx.com>
Date: Tue, 21 Apr 2020 02:50:54 +0530
From: Venkateshwar Rao Gannavarapu
<venkateshwar.rao.gannavarapu@...inx.com>
To: hyun.kwon@...inx.com, laurent.pinchart@...asonboard.com,
dri-devel@...ts.freedesktop.org
Cc: airlied@...ux.ie, daniel@...ll.ch, linux-kernel@...r.kernel.org,
sandipk@...inx.com, vgannava@...inx.com,
Venkateshwar Rao Gannavarapu
<venkateshwar.rao.gannavarapu@...inx.com>
Subject: [RFC PATCH 0/2] Add Xilinx DSI-TX DRM driver
MIPI DSI TX subsystem allows you to quickly create systems based on the
MIPI protocol. It interfaces between the video processing subsystems and
MIPI-based displays. An internal high-speed physical layer design, D-PHY,
is provided to allow direct connection to display peripherals.
The subsystem consists of the following sub-blocks:
- MIPI D-PHY
- MIPI DSI TX Controller
- AXI Crossbar
Please refer pg238 [1].
The DSI TX Controller receives stream of image data through an input stream
interface. At design time, this subsystem can be configured to number of lanes
and command mode support.
This patch series adds the dt-binding and DRM driver for Xilinx DSI-TX soft IP.
patch is created on git://linuxtv.org/pinchartl/media.git drm/dpsub/next
References:
[1]: https://www.xilinx.com/support/documentation/ip_documentation/mipi_dsi_tx_subsystem/v2_0/pg238-mipi-dsi-tx.pdf
Venkateshwar Rao Gannavarapu (2):
dt-bindings: display: xlnx: Add Xilinx DSI TX subsystem bindings
drm: xlnx: driver for Xilinx DSI TX Subsystem
.../devicetree/bindings/display/xlnx/xlnx,dsi.txt | 68 ++
drivers/gpu/drm/xlnx/Kconfig | 11 +
drivers/gpu/drm/xlnx/Makefile | 2 +
drivers/gpu/drm/xlnx/xlnx_dsi.c | 755 +++++++++++++++++++++
4 files changed, 836 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/xlnx/xlnx,dsi.txt
create mode 100644 drivers/gpu/drm/xlnx/xlnx_dsi.c
--
2.7.4
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
Powered by blists - more mailing lists