| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 20 Apr 2020 10:13:35 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Rajendra Nayak <rnayak@...eaurora.org>
Cc: Viresh Kumar <viresh.kumar@...aro.org>,
Stephen Boyd <sboyd@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Andy Gross <agross@...nel.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
DTML <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Matthias Kaehlcke <mka@...omium.org>,
Pradeep P V K <ppvk@...eaurora.org>,
Veerabhadrarao Badiganti <vbadigan@...eaurora.org>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>
Subject: Re: [PATCH v2 09/17] mmc: sdhci-msm: Use OPP API to set clk/perf state
On Fri, 17 Apr 2020 at 16:06, Rajendra Nayak <rnayak@...eaurora.org> wrote:
>
> On some qualcomm SoCs we need to vote on a performance state of a power
> domain depending on the clock rates. Hence move to using OPP api to set
> the clock rate and performance state specified in the OPP table.
> On platforms without an OPP table, dev_pm_opp_set_rate() is eqvivalent to
> clk_set_rate()
>
> Signed-off-by: Rajendra Nayak <rnayak@...eaurora.org>
> Cc: Ulf Hansson <ulf.hansson@...aro.org>
> Cc: Pradeep P V K <ppvk@...eaurora.org>
> Cc: Veerabhadrarao Badiganti <vbadigan@...eaurora.org>
> Cc: linux-mmc@...r.kernel.org
Applied for next, thanks!
Kind regards
Uffe
> ---
> drivers/mmc/host/sdhci-msm.c | 34 +++++++++++++++++++++++++++++-----
> 1 file changed, 29 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 09ff731..cf27480 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -10,6 +10,7 @@
> #include <linux/delay.h>
> #include <linux/mmc/mmc.h>
> #include <linux/pm_runtime.h>
> +#include <linux/pm_opp.h>
> #include <linux/slab.h>
> #include <linux/iopoll.h>
> #include <linux/regulator/consumer.h>
> @@ -243,6 +244,8 @@ struct sdhci_msm_host {
> struct clk_bulk_data bulk_clks[4]; /* core, iface, cal, sleep clocks */
> unsigned long clk_rate;
> struct mmc_host *mmc;
> + struct opp_table *opp;
> + bool opp_table;
> bool use_14lpp_dll_reset;
> bool tuning_done;
> bool calibration_done;
> @@ -332,7 +335,7 @@ static void msm_set_clock_rate_for_bus_mode(struct sdhci_host *host,
> int rc;
>
> clock = msm_get_clock_rate_for_bus_mode(host, clock);
> - rc = clk_set_rate(core_clk, clock);
> + rc = dev_pm_opp_set_rate(mmc_dev(host->mmc), clock);
> if (rc) {
> pr_err("%s: Failed to set clock at rate %u at timing %d\n",
> mmc_hostname(host->mmc), clock,
> @@ -1962,8 +1965,18 @@ static int sdhci_msm_probe(struct platform_device *pdev)
> }
> msm_host->bulk_clks[0].clk = clk;
>
> + msm_host->opp = dev_pm_opp_set_clkname(&pdev->dev, "core");
> + if (IS_ERR(msm_host->opp)) {
> + ret = PTR_ERR(msm_host->opp);
> + goto bus_clk_disable;
> + }
> +
> + /* OPP table is optional */
> + if (!dev_pm_opp_of_add_table(&pdev->dev))
> + msm_host->opp_table = true;
> +
> /* Vote for maximum clock rate for maximum performance */
> - ret = clk_set_rate(clk, INT_MAX);
> + ret = dev_pm_opp_set_rate(&pdev->dev, INT_MAX);
> if (ret)
> dev_warn(&pdev->dev, "core clock boost failed\n");
>
> @@ -1980,7 +1993,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
> ret = clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks),
> msm_host->bulk_clks);
> if (ret)
> - goto bus_clk_disable;
> + goto opp_cleanup;
>
> /*
> * xo clock is needed for FLL feature of cm_dll.
> @@ -2115,6 +2128,10 @@ static int sdhci_msm_probe(struct platform_device *pdev)
> clk_disable:
> clk_bulk_disable_unprepare(ARRAY_SIZE(msm_host->bulk_clks),
> msm_host->bulk_clks);
> +opp_cleanup:
> + if (msm_host->opp_table)
> + dev_pm_opp_of_remove_table(&pdev->dev);
> + dev_pm_opp_put_clkname(msm_host->opp);
> bus_clk_disable:
> if (!IS_ERR(msm_host->bus_clk))
> clk_disable_unprepare(msm_host->bus_clk);
> @@ -2133,6 +2150,9 @@ static int sdhci_msm_remove(struct platform_device *pdev)
>
> sdhci_remove_host(host, dead);
>
> + if (msm_host->opp_table)
> + dev_pm_opp_of_remove_table(&pdev->dev);
> + dev_pm_opp_put_clkname(msm_host->opp);
> pm_runtime_get_sync(&pdev->dev);
> pm_runtime_disable(&pdev->dev);
> pm_runtime_put_noidle(&pdev->dev);
> @@ -2151,6 +2171,8 @@ static __maybe_unused int sdhci_msm_runtime_suspend(struct device *dev)
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
>
> + /* Drop the performance vote */
> + dev_pm_opp_set_rate(dev, 0);
> clk_bulk_disable_unprepare(ARRAY_SIZE(msm_host->bulk_clks),
> msm_host->bulk_clks);
>
> @@ -2173,9 +2195,11 @@ static __maybe_unused int sdhci_msm_runtime_resume(struct device *dev)
> * restore the SDR DLL settings when the clock is ungated.
> */
> if (msm_host->restore_dll_config && msm_host->clk_rate)
> - return sdhci_msm_restore_sdr_dll_config(host);
> + ret = sdhci_msm_restore_sdr_dll_config(host);
>
> - return 0;
> + dev_pm_opp_set_rate(dev, msm_host->clk_rate);
> +
> + return ret;
> }
>
> static const struct dev_pm_ops sdhci_msm_pm_ops = {
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
Powered by blists - more mailing lists