| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200420113217.GR185537@smile.fi.intel.com>
Date: Mon, 20 Apr 2020 14:32:17 +0300
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Rishi Gupta <gupt21@...il.com>
Cc: gregkh@...uxfoundation.org, jslaby@...e.com, robh+dt@...nel.org,
corbet@....net, devicetree@...r.kernel.org,
linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-doc@...r.kernel.org
Subject: Re: [PATCH v3 2/4] tty/serial: ttvys: add null modem driver for
emulation
On Thu, Apr 16, 2020 at 10:26:12AM +0530, Rishi Gupta wrote:
> The ttyvs driver creates virtual tty devices that can be
> used with standard POSIX APIs for serial port based applications.
> The driver is used mainly for testing user space applications.
>
> Devices can be created through device tree and through configfs.
> Various serial port events are emulated through a sysfs file.
...
> +TTYVS VIRTUAL SERIAL DRIVER
> +M: Rishi Gupta <gupt21@...il.com>
> +L: linux-serial@...r.kernel.org
> +L: linux-kernel@...r.kernel.org
Redundant. It's default for all.
> +S: Maintained
> +F: Documentation/admin-guide/virtual-tty-ttyvs.rst
> +F: Documentation/devicetree/bindings/serial/ttyvs.yaml
> +F: drivers/tty/ttyvs.c
...
> +#include <linux/init.h>
> +#include <linux/idr.h>
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/slab.h>
> +#include <linux/wait.h>
> +#include <linux/tty.h>
> +#include <linux/tty_driver.h>
> +#include <linux/tty_flip.h>
> +#include <linux/serial.h>
> +#include <linux/sched.h>
> +#include <linux/version.h>
> +#include <linux/mutex.h>
> +#include <linux/device.h>
> +#include <linux/uaccess.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/configfs.h>
Perhaps ordered?
...
> +#define VS_CON_CTS 0x0001
> +#define VS_CON_DCD 0x0002
> +#define VS_CON_DSR 0x0004
> +#define VS_CON_RI 0x0008
> +#define VS_MCR_DTR 0x0001
> +#define VS_MCR_RTS 0x0002
> +#define VS_MCR_LOOP 0x0004
> +#define VS_MSR_CTS 0x0008
> +#define VS_MSR_DCD 0x0010
> +#define VS_MSR_RI 0x0020
> +#define VS_MSR_DSR 0x0040
> +#define VS_CRTSCTS 0x0001
> +#define VS_XON 0x0002
> +#define VS_NONE 0x0004
> +#define VS_DATA_5 0x0008
> +#define VS_DATA_6 0x0010
> +#define VS_DATA_7 0x0020
> +#define VS_DATA_8 0x0040
> +#define VS_PARITY_NONE 0x0080
> +#define VS_PARITY_ODD 0x0100
> +#define VS_PARITY_EVEN 0x0200
> +#define VS_PARITY_MARK 0x0400
> +#define VS_PARITY_SPACE 0x0800
> +#define VS_STOP_1 0x1000
> +#define VS_STOP_2 0x2000
> +#define VS_SNM 0x0001
> +#define VS_CNM 0x0002
> +#define VS_SLB 0x0003
> +#define VS_CLB 0x0004
Can you use TABs to indent?
...
> +/* Represents a virtual tty device in this virtual card */
> +struct vs_dev {
> + /* index for this device in tty core */
Convert these comments to kernel-doc.
> + unsigned int own_index;
> + /* index of the device to which this device is connected */
> + unsigned int peer_index;
> + /* shadow modem status register */
> + int msr_reg;
> + /* shadow modem control register */
> + int mcr_reg;
> + /* rts line connections for this device */
> + int rts_mappings;
> + /* dtr line connections for this device */
> + int dtr_mappings;
> + int set_odtr_at_open;
> + int set_pdtr_at_open;
> + int odevtyp;
> + /* mutual exclusion at device level */
> + struct mutex lock;
> + int is_break_on;
> + /* currently active baudrate */
> + int baud;
> + int uart_frame;
> + int waiting_msr_chg;
> + int tx_paused;
> + int faulty_cable;
> + struct tty_struct *own_tty;
> + struct tty_struct *peer_tty;
> + struct serial_struct serial;
> + struct async_icount icount;
> + struct device *device;
> +};
...
> +static ssize_t event_store(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t count)
> +{
> + int ret, push = 1;
> + struct vs_dev *local_vsdev = dev_get_drvdata(dev);
> + struct tty_struct *tty_to_write = local_vsdev->own_tty;
> +
> + if (!buf || (count <= 0))
On which circumstances the count can be < 0 ?!
Have you checked when it can be 0 here? Can it at all?
> + return -EINVAL;
> +
> + /*
> + * Ensure required structure has been allocated, initialized and
> + * port has been opened.
> + */
> + if (!tty_to_write || (tty_to_write->port == NULL)
> + || (tty_to_write->port->count <= 0))
Better formatting style and indentation, please.
> + return -EIO;
When port->count can be less than zero?
> + if (!test_bit(ASYNCB_INITIALIZED, &tty_to_write->port->flags))
> + return -EIO;
> +
> + mutex_lock(&local_vsdev->lock);
> +
> + switch (buf[0]) {
> + case '1':
> + ret = tty_insert_flip_char(tty_to_write->port, -7, TTY_FRAME);
> + if (ret < 0)
> + goto fail;
> + local_vsdev->icount.frame++;
> + break;
> + case '2':
> + ret = tty_insert_flip_char(tty_to_write->port, -8, TTY_PARITY);
> + if (ret < 0)
> + goto fail;
> + local_vsdev->icount.parity++;
> + break;
> + case '3':
> + ret = tty_insert_flip_char(tty_to_write->port, 0, TTY_OVERRUN);
> + if (ret < 0)
> + goto fail;
> + local_vsdev->icount.overrun++;
> + break;
> + case '4':
> + local_vsdev->msr_reg |= VS_MSR_RI;
> + local_vsdev->icount.rng++;
> + push = -1;
> + break;
> + case '5':
> + local_vsdev->msr_reg &= ~VS_MSR_RI;
> + local_vsdev->icount.rng++;
> + push = -1;
> + break;
> + case '6':
> + ret = tty_insert_flip_char(tty_to_write->port, 0, TTY_BREAK);
> + if (ret < 0)
> + goto fail;
> + local_vsdev->icount.brk++;
> + break;
> + case '7':
> + local_vsdev->faulty_cable = 1;
> + push = -1;
> + break;
> + case '8':
> + local_vsdev->faulty_cable = 0;
> + push = -1;
> + break;
> + default:
> + mutex_unlock(&local_vsdev->lock);
> + return -EINVAL;
> + }
> +
> + if (push)
> + tty_flip_buffer_push(tty_to_write->port);
> + ret = count;
> +
> +fail:
> + mutex_unlock(&local_vsdev->lock);
> + return ret;
> +}
> +static DEVICE_ATTR_WO(event);
> +
> +static struct attribute *ttyvs_attrs[] = {
> + &dev_attr_event.attr,
> + NULL,
No comma for terminator line.
> +};
> +ATTRIBUTE_GROUPS(ttyvs);
> +
> +/*
> + * Checks if the given serial port has received its carrier detect
> + * line raised or not. Return 1 if the carrier is raised otherwise 0.
> + */
> +static int vs_port_carrier_raised(struct tty_port *port)
> +{
> + struct vs_dev *local_vsdev = idr_find(&db, port->tty->index);
> +
> + return (local_vsdev->msr_reg & VS_MSR_DCD) ? 1 : 0;
Redundant ternary. Use !! if you wish to tight the values to [0..1] range, but
rather simple drop the ternary.
> +}
> +
> +/* Shutdown the given serial port */
> +static void vs_port_shutdown(struct tty_port *port)
> +{
> + pr_debug("shutting down the port!\n");
dev_dbg()
Everywhere where you have struct device available use dev_*() instead of pr_*().
> +}
...
> +/*
> + * Update modem control and status registers according to the bit
> + * mask(s) provided. The RTS and DTR values can be set only if the
> + * current handshaking state of the tty device allows direct control
> + * of the modem control lines. The pin mappings are honoured.
> + *
> + * Caller holds lock of thegiven virtual tty device.
> + */
> +static int vs_update_modem_lines(struct tty_struct *tty,
> + unsigned int set, unsigned int clear)
> +{
> + int ctsint = 0;
> + int dcdint = 0;
> + int dsrint = 0;
> + int rngint = 0;
> + int mcr_ctrl_reg = 0;
Redundant assignment.
Also check other variables here, and in entire code.
> + int wakeup_blocked_open = 0;
> + int rts_mappings, dtr_mappings, msr_state_reg;
> + struct async_icount *evicount;
> + struct vs_dev *vsdev, *local_vsdev, *remote_vsdev;
> +
> + local_vsdev = idr_find(&db, tty->index);
> +
> + /* Read modify write MSR register */
> + if (tty->index != local_vsdev->peer_index) {
> + remote_vsdev = idr_find(&db, local_vsdev->peer_index);
> + msr_state_reg = remote_vsdev->msr_reg;
> + vsdev = remote_vsdev;
> + } else {
> + msr_state_reg = local_vsdev->msr_reg;
> + vsdev = local_vsdev;
> + }
> +
> + rts_mappings = local_vsdev->rts_mappings;
> + dtr_mappings = local_vsdev->dtr_mappings;
> +
> + if (set & TIOCM_RTS) {
> + mcr_ctrl_reg |= VS_MCR_RTS;
> + if ((rts_mappings & VS_CON_CTS) == VS_CON_CTS) {
> + msr_state_reg |= VS_MSR_CTS;
> + ctsint++;
> + }
> + if ((rts_mappings & VS_CON_DCD) == VS_CON_DCD) {
> + msr_state_reg |= VS_MSR_DCD;
> + dcdint++;
> + wakeup_blocked_open = 1;
> + }
> + if ((rts_mappings & VS_CON_DSR) == VS_CON_DSR) {
> + msr_state_reg |= VS_MSR_DSR;
> + dsrint++;
> + }
> + if ((rts_mappings & VS_CON_RI) == VS_CON_RI) {
> + msr_state_reg |= VS_MSR_RI;
> + rngint++;
> + }
> + }
> +
> + if (set & TIOCM_DTR) {
> + mcr_ctrl_reg |= VS_MCR_DTR;
> + if ((dtr_mappings & VS_CON_CTS) == VS_CON_CTS) {
> + msr_state_reg |= VS_MSR_CTS;
> + ctsint++;
> + }
> + if ((dtr_mappings & VS_CON_DCD) == VS_CON_DCD) {
> + msr_state_reg |= VS_MSR_DCD;
> + dcdint++;
> + wakeup_blocked_open = 1;
> + }
> + if ((dtr_mappings & VS_CON_DSR) == VS_CON_DSR) {
> + msr_state_reg |= VS_MSR_DSR;
> + dsrint++;
> + }
> + if ((dtr_mappings & VS_CON_RI) == VS_CON_RI) {
> + msr_state_reg |= VS_MSR_RI;
> + rngint++;
> + }
> + }
> +
> + if (clear & TIOCM_RTS) {
> + mcr_ctrl_reg &= ~VS_MCR_RTS;
> + if ((rts_mappings & VS_CON_CTS) == VS_CON_CTS) {
> + msr_state_reg &= ~VS_MSR_CTS;
> + ctsint++;
> + }
> + if ((rts_mappings & VS_CON_DCD) == VS_CON_DCD) {
> + msr_state_reg &= ~VS_MSR_DCD;
> + dcdint++;
> + }
> + if ((rts_mappings & VS_CON_DSR) == VS_CON_DSR) {
> + msr_state_reg &= ~VS_MSR_DSR;
> + dsrint++;
> + }
> + if ((rts_mappings & VS_CON_RI) == VS_CON_RI) {
> + msr_state_reg &= ~VS_MSR_RI;
> + rngint++;
> + }
> + }
> +
> + if (clear & TIOCM_DTR) {
> + mcr_ctrl_reg &= ~VS_MCR_DTR;
> + if ((dtr_mappings & VS_CON_CTS) == VS_CON_CTS) {
> + msr_state_reg &= ~VS_MSR_CTS;
> + ctsint++;
> + }
> + if ((dtr_mappings & VS_CON_DCD) == VS_CON_DCD) {
> + msr_state_reg &= ~VS_MSR_DCD;
> + dcdint++;
> + }
> + if ((dtr_mappings & VS_CON_DSR) == VS_CON_DSR) {
> + msr_state_reg &= ~VS_MSR_DSR;
> + dsrint++;
> + }
> + if ((dtr_mappings & VS_CON_RI) == VS_CON_RI) {
> + msr_state_reg &= ~VS_MSR_RI;
> + rngint++;
> + }
> + }
> +
> + local_vsdev->mcr_reg = mcr_ctrl_reg;
> + vsdev->msr_reg = msr_state_reg;
> +
> + evicount = &vsdev->icount;
> + evicount->cts += ctsint;
> + evicount->dsr += dsrint;
> + evicount->dcd += dcdint;
> + evicount->rng += rngint;
> +
> + if (vsdev->own_tty && vsdev->own_tty->port) {
> + /* Wake up process blocked on TIOCMIWAIT ioctl */
> + if ((vsdev->waiting_msr_chg == 1) &&
> + (vsdev->own_tty->port->count > 0)) {
> + wake_up_interruptible(
> + &vsdev->own_tty->port->delta_msr_wait);
> + }
> +
> + /* Wake up application blocked on carrier detect signal */
> + if ((wakeup_blocked_open == 1) &&
> + (vsdev->own_tty->port->blocked_open > 0)) {
> + wake_up_interruptible(&vsdev->own_tty->port->open_wait);
> + }
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * Invoked when user space process opens a serial port. The tty core
> + * calls this to install tty and initialize the required resources.
> + */
> +static int vs_install(struct tty_driver *drv, struct tty_struct *tty)
> +{
> + int ret;
> + struct tty_port *port;
> +
> + port = kcalloc(1, sizeof(struct tty_port), GFP_KERNEL);
What the point of kcalloc(1, ...) ?
> + if (!port)
> + return -ENOMEM;
> +
> + /* First initialize and then set port operations */
> + tty_port_init(port);
> + port->ops = &vs_port_ops;
> +
> + ret = tty_port_install(port, drv, tty);
> + if (ret) {
> + kfree(port);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * Invoked when there exist no user process or tty is to be
> + * released explicitly for whatever reason.
> + */
> +static void vs_cleanup(struct tty_struct *tty)
> +{
> + tty_port_put(tty->port);
> +}
> +
> +/*
> + * Called when open system call is called on virtual tty device node.
> + * The tty core allocates 'struct tty_struct' for this device and
> + * set up various resources, sets up line discipline and call this
> + * function. For first time allocation happens and from next time
> + * onwards only re-opening happens.
> + *
> + * The tty core finds the tty driver serving this device node and the
> + * index of this tty device as registered by this driver with tty core.
> + * From this inded we retrieve the virtual tty device to work on.
> + *
> + * If the same serial port is opened more than once, the tty structure
> + * passed to this function will be same but filp structure will be
> + * different every time. Caller holds tty lock.
> + *
> + * This driver does not set CLOCAL by default. This means that the
> + * open() system call will block until it find its carrier detect
> + * line raised. Application should use O_NONBLOCK/O_NDELAY flag if
> + * it does not want to wait for DCD line change.
> + */
> +static int vs_open(struct tty_struct *tty, struct file *filp)
> +{
> + int ret;
> + struct vs_dev *remote_vsdev;
> + struct vs_dev *local_vsdev = idr_find(&db, tty->index);
> +
> + local_vsdev->own_tty = tty;
> +
> + /*
> + * If this device is one end of a null modem connection,
> + * provide its address to remote end.
> + */
> + if (tty->index != local_vsdev->peer_index) {
> + remote_vsdev = idr_find(&db, local_vsdev->peer_index);
> + remote_vsdev->peer_tty = tty;
> + }
> +
> + memset(&local_vsdev->serial, 0, sizeof(struct serial_struct));
> + memset(&local_vsdev->icount, 0, sizeof(struct async_icount));
> +
> + /*
> + * Handle DTR raising logic ourselve instead of tty_port helpers
> + * doing it. Locking virtual tty is not required here.
> + */
> + if (local_vsdev->set_odtr_at_open == 1)
> + vs_update_modem_lines(tty, TIOCM_DTR | TIOCM_RTS, 0);
> +
> + /* Associate tty with port and do port level opening. */
> + ret = tty_port_open(tty->port, tty, filp);
> + if (ret)
> + return ret;
> +
> + tty->port->close_delay = 0;
> + tty->port->closing_wait = ASYNC_CLOSING_WAIT_NONE;
> + tty->port->drain_delay = 0;
> +
> + return ret;
> +}
> +
> +/*
> + * Invoked by tty layer when release() is called on the file pointer
> + * that was previously created with a call to open().
> + */
> +static void vs_close(struct tty_struct *tty, struct file *filp)
> +{
> + if (test_bit(TTY_IO_ERROR, &tty->flags))
> + return;
> +
> + if (tty && filp && tty->port && (tty->port->count > 0))
> + tty_port_close(tty->port, tty, filp);
> +
> + if (tty && C_HUPCL(tty) && tty->port && (tty->port->count < 1))
> + vs_update_modem_lines(tty, 0, TIOCM_DTR | TIOCM_RTS);
> +}
> +
> +/*
> + * Invoked when write() system call is invoked on device node.
> + * This function constructs evry byte as per the current uart
> + * frame settings. Finally, the data is inserted into the tty
> + * buffer of the receiver tty device.
> + */
> +static int vs_write(struct tty_struct *tty,
> + const unsigned char *buf, int count)
> +{
> + int x;
> + unsigned char *data = NULL;
> + struct tty_struct *tty_to_write = NULL;
> + struct vs_dev *rx_vsdev = NULL;
> + struct vs_dev *tx_vsdev = idr_find(&db, tty->index);
> + if (tx_vsdev->tx_paused || !tty || tty->stopped
> + || (count < 1) || !buf || tty->hw_stopped)
Indentation issue.
Fix in entire code.
> + return 0;
> +
> + if (tx_vsdev->is_break_on == 1) {
> + pr_debug("break condition is on!\n");
> + return -EIO;
> + }
> +
> + if (tx_vsdev->faulty_cable == 1)
> + return count;
> +
> + if (tty->index != tx_vsdev->peer_index) {
> + /* Null modem */
> + tty_to_write = tx_vsdev->peer_tty;
> + rx_vsdev = idr_find(&db, tx_vsdev->peer_index);
> +
> + if ((tx_vsdev->baud != rx_vsdev->baud) ||
> + (tx_vsdev->uart_frame != rx_vsdev->uart_frame)) {
> + /*
> + * Emulate data sent but not received due to
> + * mismatched baudrate/framing.
> + */
> + pr_debug("mismatched serial port settings!\n");
> + tx_vsdev->icount.tx++;
> + return count;
> + }
> + } else {
> + /* Loop back */
> + tty_to_write = tty;
> + rx_vsdev = tx_vsdev;
> + }
> +
> + if (tty_to_write) {
> + if ((tty_to_write->termios.c_cflag & CSIZE) == CS8) {
> + data = (unsigned char *)buf;
> + } else {
> + data = kcalloc(count, sizeof(char), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + /* Emulate correct number of data bits */
> + switch (tty_to_write->termios.c_cflag & CSIZE) {
> + case CS7:
> + for (x = 0; x < count; x++)
> + data[x] = buf[x] & 0x7F;
> + break;
> + case CS6:
> + for (x = 0; x < count; x++)
> + data[x] = buf[x] & 0x3F;
> + break;
> + case CS5:
> + for (x = 0; x < count; x++)
> + data[x] = buf[x] & 0x1F;
> + break;
> + default:
> + data = (unsigned char *)buf;
When this possible?
> + }
> + }
> +
> + tty_insert_flip_string(tty_to_write->port, data, count);
> + tty_flip_buffer_push(tty_to_write->port);
> + tx_vsdev->icount.tx++;
> + rx_vsdev->icount.rx++;
> +
> + if (data != buf)
> + kfree(data);
> + } else {
> + /*
> + * Other end is still not opened, emulate transmission from
> + * local end but don't make other end receive it as is the
> + * case in real world.
> + */
> + tx_vsdev->icount.tx++;
> + }
> +
> + return count;
> +}
...
> + info.type = PORT_UNKNOWN;
> + info.line = serial.line;
> + info.port = tty->index;
> + info.irq = 0;
> + info.flags = tty->port->flags;
> + info.xmit_fifo_size = 0;
> + info.baud_base = 0;
> + info.close_delay = tty->port->close_delay;
> + info.closing_wait = tty->port->closing_wait;
> + info.custom_divisor = 0;
> + info.hub6 = 0;
> + info.io_type = SERIAL_IO_MEM;
Full of indentation issues.
> +
> + ret = copy_to_user((void __user *)arg, &info,
> + sizeof(struct serial_struct));
Wouldn't
if (copy_to_user(...))
return -EFAULT;
return 0;
work better?
> +
> + return ret ? -EFAULT : 0;
...
> + u32 baud;
u32? Why?
...
> +static int vs_ioctl(struct tty_struct *tty,
> + unsigned int cmd, unsigned long arg)
> +{
> + switch (cmd) {
> + case TIOCGSERIAL:
> + return vs_get_serinfo(tty, arg);
> + case TIOCMIWAIT:
> + return vs_wait_change(tty, arg);
> + }
> +
> + return -ENOIOCTLCMD;
Perhaps this should be default case above.
> +}
...
> +static void vs_throttle(struct tty_struct *tty)
> +{
> + struct vs_dev *local_vsdev = idr_find(&db, tty->index);
> + struct vs_dev *remote_vsdev = idr_find(&db, local_vsdev->peer_index);
> +
> + if (tty->termios.c_cflag & CRTSCTS) {
> + mutex_lock(&local_vsdev->lock);
> + remote_vsdev->tx_paused = 1;
> + vs_update_modem_lines(tty, 0, TIOCM_RTS);
> + mutex_unlock(&local_vsdev->lock);
> + } else if ((tty->termios.c_iflag & IXON) ||
> + (tty->termios.c_iflag & IXOFF)) {
Indentation issues. Fix in every alike places.
> + vs_put_char(tty, STOP_CHAR(tty));
> + } else {
> + /* do nothing */
> + }
> +}
...
> +static int vs_tiocmget(struct tty_struct *tty)
> +{
> + int status, msr_reg, mcr_reg;
> + struct vs_dev *local_vsdev = idr_find(&db, tty->index);
> +
> + mutex_lock(&local_vsdev->lock);
> + mcr_reg = local_vsdev->mcr_reg;
> + msr_reg = local_vsdev->msr_reg;
> + mutex_unlock(&local_vsdev->lock);
> +
> + status = ((mcr_reg & VS_MCR_DTR) ? TIOCM_DTR : 0) |
> + ((mcr_reg & VS_MCR_RTS) ? TIOCM_RTS : 0) |
> + ((mcr_reg & VS_MCR_LOOP) ? TIOCM_LOOP : 0) |
> + ((msr_reg & VS_MSR_DCD) ? TIOCM_CAR : 0) |
> + ((msr_reg & VS_MSR_RI) ? TIOCM_RI : 0) |
> + ((msr_reg & VS_MSR_CTS) ? TIOCM_CTS : 0) |
> + ((msr_reg & VS_MSR_DSR) ? TIOCM_DSR : 0);
Why not to indent by first line properly?
Fix this in all similar places.
> + return status;
> +}
...
> +static int vs_break_ctl(struct tty_struct *tty, int break_state)
> +{
> + struct tty_struct *tty_to_write;
> + struct vs_dev *brk_rx_vsdev;
> + struct vs_dev *brk_tx_vsdev = idr_find(&db, tty->index);
> +
> + if (tty->index != brk_tx_vsdev->peer_index) {
> + tty_to_write = brk_tx_vsdev->peer_tty;
> + brk_rx_vsdev = idr_find(&db, brk_tx_vsdev->peer_index);
> + } else {
> + tty_to_write = tty;
> + brk_rx_vsdev = brk_tx_vsdev;
> + }
> +
> + mutex_lock(&brk_tx_vsdev->lock);
> +
> + if (break_state != 0) {
if (break_state) {
> + if (brk_tx_vsdev->is_break_on == 1)
> + return 0;
> +
> + brk_tx_vsdev->is_break_on = 1;
> + if (tty_to_write != NULL) {
> + tty_insert_flip_char(tty_to_write->port, 0, TTY_BREAK);
> + tty_flip_buffer_push(tty_to_write->port);
> + brk_rx_vsdev->icount.brk++;
> + }
> + } else {
> + brk_tx_vsdev->is_break_on = 0;
> + }
> +
> + mutex_unlock(&brk_tx_vsdev->lock);
> + return 0;
> +}
...
> +static void vs_send_xchar(struct tty_struct *tty, char ch)
> +{
> + int was_paused;
> + struct vs_dev *local_vsdev = idr_find(&db, tty->index);
> +
> + was_paused = local_vsdev->tx_paused;
> + if (was_paused)
> + local_vsdev->tx_paused = 0;
> +
> + vs_put_char(tty, ch);
> + if (was_paused)
> + local_vsdev->tx_paused = 1;
Can it be refactored like
if (local_vsdev->tx_paused) {
local_vsdev->tx_paused = 0;
vs_put_char(tty, ch);
local_vsdev->tx_paused = 1;
} else {
vs_put_char(tty, ch);
}
?
> +}
...
> +static int vs_del_specific_devs(int ownidx, int free_idr)
> +{
> + struct vs_dev *vsdev1, *vsdev2;
> +
> + /*
> + * If user just created configfs item but did not populated valid
> + * index, device will not exist, so bail out early.
> + */
> + vsdev1 = idr_find(&db, ownidx);
> + if (!vsdev1)
> + return 0;
> +
> + vs_unreg_one_dev(ownidx, vsdev1);
> +
> + /* If this device is part of a null modem, delete peer also */
> + if (vsdev1->own_index != vsdev1->peer_index) {
> + vsdev2 = idr_find(&db, vsdev1->peer_index);
> + if (vsdev2) {
> + vs_unreg_one_dev(vsdev2->own_index, vsdev2);
> + if (free_idr)
This...
> + idr_remove(&db, vsdev2->own_index);
> + kfree(vsdev2);
> + }
> + }
> + if (free_idr)
...and this. Can you elaborate in which case we won't free IDR?
> + idr_remove(&db, ownidx);
> + kfree(vsdev1);
> +
> + return 0;
> +}
...
> +static int vs_alloc_reg_one_dev(int oidx, int pidx, int rtsmap,
> + int dtrmap, int dtropn)
> +{
> + int ret, id;
> + struct vs_dev *vsdev;
> + struct device *dev;
> +
> + /* Allocate and init virtual tty device's private data */
> + vsdev = kcalloc(1, sizeof(struct vs_dev), GFP_KERNEL);
What the point of kcalloc(1, ...)?
> + if (!vsdev)
> + return -ENOMEM;
> +
> + id = idr_alloc(&db, vsdev, oidx, oidx + 1, GFP_KERNEL);
> + if (id < 0) {
> + ret = id;
> + goto fail_id;
> + }
> +
> + vsdev->own_tty = NULL;
> + vsdev->peer_tty = NULL;
> + vsdev->own_index = oidx;
> + vsdev->peer_index = pidx;
> + vsdev->rts_mappings = rtsmap;
> + vsdev->dtr_mappings = dtrmap;
> + vsdev->set_odtr_at_open = dtropn;
> + vsdev->msr_reg = 0;
> + vsdev->mcr_reg = 0;
> + vsdev->waiting_msr_chg = 0;
> + vsdev->tx_paused = 0;
> + vsdev->faulty_cable = 0;
> + mutex_init(&vsdev->lock);
> +
> + /*
> + * Register with tty core with a specific minor number.
> + * Driver core itself will create sysfs nodes (ttyvs_groups).
> + */
> + dev = tty_register_device_attr(ttyvs_driver, oidx, NULL,
> + vsdev, ttyvs_groups);
> + if (!dev) {
> + ret = -ENOMEM;
> + goto fail_reg;
> + }
> +
> + vsdev->device = dev;
> + return 0;
> +
> +fail_reg:
> + idr_remove(&db, id);
> +fail_id:
> + kfree(vsdev);
> + return ret;
> +}
...
> + *dtratopen = di->pdtratopn ? 1 : 0;
> + *dtratopen = di->odtratopn ? 1 : 0;
Do you need ternary? (Btw, second one has indentation issues)
...
> +static int vs_extract_dev_param_dt(const struct device_node *np,
> + unsigned int *idx, int *rtsmap, int *dtrmap,
> + int *dtratopen, int exclude)
> +{
> + int ret;
> +
> + ret = of_property_read_u32(np, "dev-num", idx);
> + if (ret)
> + return ret;
> +
> + if (*idx >= max_num_vs_devs)
> + return -EINVAL;
> +
> + ret = vs_parse_dt_get_map(np, "rtsmap", rtsmap);
> + if (ret)
> + return ret;
> +
> + ret = vs_parse_dt_get_map(np, "dtrmap", dtrmap);
> + if (ret)
> + return ret;
> +
> + *dtratopen = of_property_read_bool(np,
> + "set-dtr-at-open") ? 1 : 0;
Why ternary, why two lines?
> +
> + return 0;
> +}
...
> +fail:
fail_unlock: will better describe what you are doing here.
Same applies to other labels (revisit them all).
> + mutex_unlock(&card_lock);
> + return ret;
...
> +static const struct tty_operations vs_serial_ops = {
> + .install = vs_install,
> + .cleanup = vs_cleanup,
> + .open = vs_open,
> + .close = vs_close,
> + .write = vs_write,
> + .put_char = vs_put_char,
> + .flush_chars = vs_flush_chars,
> + .write_room = vs_write_room,
> + .chars_in_buffer = vs_chars_in_buffer,
> + .ioctl = vs_ioctl,
> + .set_termios = vs_set_termios,
> + .throttle = vs_throttle,
> + .unthrottle = vs_unthrottle,
> + .stop = vs_stop,
> + .start = vs_start,
> + .hangup = vs_hangup,
> + .break_ctl = vs_break_ctl,
> + .flush_buffer = vs_flush_buffer,
> + .wait_until_sent = vs_wait_until_sent,
> + .send_xchar = vs_send_xchar,
> + .tiocmget = vs_tiocmget,
> + .tiocmset = vs_tiocmset,
> + .get_icount = vs_get_icount,
> +};
Your code has enormous amount of indentation issues. Please, fix your editor
settings or do something about it.
...
> + if (of_property_read_u32(child, "peer-dev", &peer)) {
> + ret = vs_add_lb(NULL, child);
> + if (ret) {
> + pr_err("can't create lb %s %d\n",
> + child->name, ret);
> + continue;
> + }
> + } else {
> + peer_node = of_find_node_by_phandle(peer);
> + if (peer_node) {
> + of_node_set_flag(peer_node, OF_POPULATED);
> + ret = vs_add_nm(NULL, child, peer_node);
> + if (ret) {
> + pr_err("can't create nm %s <-> %s %d\n",
> + child->name, peer_node->name,
> + ret);
> + continue;
> + }
> + } else {
> + pr_err("can't find peer for %s %d\n",
> + child->name, ret);
> + }
Besides pr_err(), I guess should be dev_err() or so, above looks like OF voodoo
magic which I believe already implemented in OF framework. Care to think about
it?
> + }
...
> + return container_of(to_config_group(item),
> + struct vs_cfs_dev_info, grp);
It's perfectly one line. Why two?
...
> +static ssize_t vs_dev_create_store(struct config_item *item,
> + const char *page, size_t len)
> +{
> + u8 val;
> + int ret;
> + struct vs_cfs_dev_info *di;
> +
> + ret = kstrtou8(page, 0, &val);
> + if (ret)
> + return ret;
> +
> + /* User must write 1 to this node create device */
> + if (val != 1)
> + return -EINVAL;
Why above it's not boolean? Why this doesn't accept 0?
Can't you simple ignore 'false' case?
> +
> + di = to_vs_dinfo(item);
> +
> + /* devtype must be defined to proceed further */
> + if (!di->devtype)
> + return -EINVAL;
> +
> + if (strncmp(di->devtype, "lb", 2) == 0)
> + ret = vs_add_lb(di, NULL);
> + else if (strncmp(di->devtype, "nm", 2) == 0)
> + ret = vs_add_nm(di, NULL, NULL);
> + else
> + return -EINVAL;
match_string() / sysfs_match_string() ?
> + if (ret)
> + return ret;
> + return len;
> +}
...
> +VS_DEV_ATTR_WR_STR(devtype)
> +VS_DEV_ATTR_WR_U16(ownidx)
> +VS_DEV_ATTR_WR_U16(peeridx)
> +VS_DEV_ATTR_WR_U8(ortsmap)
> +VS_DEV_ATTR_WR_U8(odtrmap)
> +VS_DEV_ATTR_WR_U8(odtratopn)
> +VS_DEV_ATTR_WR_U8(prtsmap)
> +VS_DEV_ATTR_WR_U8(pdtrmap)
> +VS_DEV_ATTR_WR_U8(pdtratopn)
Where are semicolons? Above looks fragile.
...
> +static struct configfs_attribute *vs_dev_attrs[] = {
> + &vs_dev_attr_devtype,
> + &vs_dev_attr_ownidx,
> + &vs_dev_attr_ortsmap,
> + &vs_dev_attr_odtrmap,
> + &vs_dev_attr_odtratopn,
> + &vs_dev_attr_peeridx,
> + &vs_dev_attr_prtsmap,
> + &vs_dev_attr_pdtrmap,
> + &vs_dev_attr_pdtratopn,
> + &vs_dev_attr_create,
> + NULL,
No comma for terminator line.
> +};
> +/*
> + * By default this driver supports upto 64 virtual devices. This
> + * can be overridden through max_num_vs_devs module parameter or
> + * through max-num-vs-devs device tree property.
> + */
> +module_param(max_num_vs_devs, ushort, 0);
> +MODULE_PARM_DESC(max_num_vs_devs,
> + "Maximum virtual tty devices to be supported");
Can't you update this dynamically thru sysfs?
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists