lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200420121620.2099-6-benjamin.gaignard@st.com>
Date:   Mon, 20 Apr 2020 14:16:19 +0200
From:   Benjamin Gaignard <benjamin.gaignard@...com>
To:     <fabrice.gasnier@...com>, <lee.jones@...aro.org>,
        <robh+dt@...nel.org>, <mark.rutland@....com>,
        <mcoquelin.stm32@...il.com>, <alexandre.torgue@...com>,
        <daniel.lezcano@...aro.org>, <tglx@...utronix.de>
CC:     <devicetree@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>,
        Benjamin Gaignard <benjamin.gaignard@...aro.org>,
        Pascal Paillet <p.paillet@...com>
Subject: [PATCH v7 5/6] clocksource: Add Low Power STM32 timers driver

From: Benjamin Gaignard <benjamin.gaignard@...aro.org>

Implement clock event driver using low power STM32 timers.
Low power timer counters running even when CPUs are stopped.
It could be used as clock event broadcaster to wake up CPUs but not like
a clocksource because each it rise an interrupt the counter restart from 0.

Low power timers have a 16 bits counter and a prescaler which allow to
divide the clock per power of 2 to up 128 to target a 32KHz rate.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@...aro.org>
Signed-off-by: Pascal Paillet <p.paillet@...com>
---
 drivers/clocksource/Kconfig          |   4 +
 drivers/clocksource/Makefile         |   1 +
 drivers/clocksource/timer-stm32-lp.c | 221 +++++++++++++++++++++++++++++++++++
 3 files changed, 226 insertions(+)
 create mode 100644 drivers/clocksource/timer-stm32-lp.c

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index f2142e6bbea3..22b8d8f1eb40 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -292,6 +292,10 @@ config CLKSRC_STM32
 	select CLKSRC_MMIO
 	select TIMER_OF
 
+config CLKSRC_STM32_LP
+	bool "Low power clocksource for STM32 SoCs"
+	depends on MFD_STM32_LPTIMER || COMPILE_TEST
+
 config CLKSRC_MPS2
 	bool "Clocksource for MPS2 SoCs" if COMPILE_TEST
 	depends on GENERIC_SCHED_CLOCK
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 641ba5383ab5..69f744135cb5 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_BCM_KONA_TIMER)	+= bcm_kona_timer.o
 obj-$(CONFIG_CADENCE_TTC_TIMER)	+= timer-cadence-ttc.o
 obj-$(CONFIG_CLKSRC_EFM32)	+= timer-efm32.o
 obj-$(CONFIG_CLKSRC_STM32)	+= timer-stm32.o
+obj-$(CONFIG_CLKSRC_STM32_LP)	+= timer-stm32-lp.o
 obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exynos_mct.o
 obj-$(CONFIG_CLKSRC_LPC32XX)	+= timer-lpc32xx.o
 obj-$(CONFIG_CLKSRC_MPS2)	+= mps2-timer.o
diff --git a/drivers/clocksource/timer-stm32-lp.c b/drivers/clocksource/timer-stm32-lp.c
new file mode 100644
index 000000000000..0f06b8a337aa
--- /dev/null
+++ b/drivers/clocksource/timer-stm32-lp.c
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Authors: Benjamin Gaignard <benjamin.gaignard@...com> for STMicroelectronics.
+ *	    Pascal Paillet <p.paillet@...com> for STMicroelectronics.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/stm32-lptimer.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+
+#define CFGR_PSC_OFFSET		9
+#define STM32_LP_RATING		1000
+#define STM32_TARGET_CLKRATE	(32000 * HZ)
+#define STM32_LP_MAX_PSC	7
+
+struct stm32_lp_private {
+	struct regmap *reg;
+	struct clock_event_device clkevt;
+	unsigned long period;
+	struct device *dev;
+};
+
+static struct stm32_lp_private*
+to_priv(struct clock_event_device *clkevt)
+{
+	return container_of(clkevt, struct stm32_lp_private, clkevt);
+}
+
+static int stm32_clkevent_lp_shutdown(struct clock_event_device *clkevt)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	regmap_write(priv->reg, STM32_LPTIM_CR, 0);
+	regmap_write(priv->reg, STM32_LPTIM_IER, 0);
+	/* clear pending flags */
+	regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_ARRMCF);
+
+	return 0;
+}
+
+static int stm32_clkevent_lp_set_timer(unsigned long evt,
+				       struct clock_event_device *clkevt,
+				       int is_periodic)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	/* disable LPTIMER to be able to write into IER register*/
+	regmap_write(priv->reg, STM32_LPTIM_CR, 0);
+	/* enable ARR interrupt */
+	regmap_write(priv->reg, STM32_LPTIM_IER, STM32_LPTIM_ARRMIE);
+	/* enable LPTIMER to be able to write into ARR register */
+	regmap_write(priv->reg, STM32_LPTIM_CR, STM32_LPTIM_ENABLE);
+	/* set next event counter */
+	regmap_write(priv->reg, STM32_LPTIM_ARR, evt);
+
+	/* start counter */
+	if (is_periodic)
+		regmap_write(priv->reg, STM32_LPTIM_CR,
+			     STM32_LPTIM_CNTSTRT | STM32_LPTIM_ENABLE);
+	else
+		regmap_write(priv->reg, STM32_LPTIM_CR,
+			     STM32_LPTIM_SNGSTRT | STM32_LPTIM_ENABLE);
+
+	return 0;
+}
+
+static int stm32_clkevent_lp_set_next_event(unsigned long evt,
+					    struct clock_event_device *clkevt)
+{
+	return stm32_clkevent_lp_set_timer(evt, clkevt,
+					   clockevent_state_periodic(clkevt));
+}
+
+static int stm32_clkevent_lp_set_periodic(struct clock_event_device *clkevt)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	return stm32_clkevent_lp_set_timer(priv->period, clkevt, true);
+}
+
+static int stm32_clkevent_lp_set_oneshot(struct clock_event_device *clkevt)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	return stm32_clkevent_lp_set_timer(priv->period, clkevt, false);
+}
+
+static irqreturn_t stm32_clkevent_lp_irq_handler(int irq, void *dev_id)
+{
+	struct clock_event_device *clkevt = (struct clock_event_device *)dev_id;
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_ARRMCF);
+
+	if (clkevt->event_handler)
+		clkevt->event_handler(clkevt);
+
+	return IRQ_HANDLED;
+}
+
+static void stm32_clkevent_lp_set_prescaler(struct stm32_lp_private *priv,
+					    unsigned long *rate)
+{
+	int i;
+
+	for (i = 0; i <= STM32_LP_MAX_PSC; i++) {
+		if (DIV_ROUND_CLOSEST(*rate, 1 << i) < STM32_TARGET_CLKRATE)
+			break;
+	}
+
+	regmap_write(priv->reg, STM32_LPTIM_CFGR, i << CFGR_PSC_OFFSET);
+
+	/* Adjust rate and period given the prescaler value */
+	*rate = DIV_ROUND_CLOSEST(*rate, (1 << i));
+	priv->period = DIV_ROUND_UP(*rate, HZ);
+}
+
+static void stm32_clkevent_lp_init(struct stm32_lp_private *priv,
+				  struct device_node *np, unsigned long rate)
+{
+	priv->clkevt.name = np->full_name;
+	priv->clkevt.cpumask = cpu_possible_mask;
+	priv->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
+				CLOCK_EVT_FEAT_ONESHOT;
+	priv->clkevt.set_state_shutdown = stm32_clkevent_lp_shutdown;
+	priv->clkevt.set_state_periodic = stm32_clkevent_lp_set_periodic;
+	priv->clkevt.set_state_oneshot = stm32_clkevent_lp_set_oneshot;
+	priv->clkevt.set_next_event = stm32_clkevent_lp_set_next_event;
+	priv->clkevt.rating = STM32_LP_RATING;
+
+	clockevents_config_and_register(&priv->clkevt, rate, 0x1,
+					STM32_LPTIM_MAX_ARR);
+}
+
+static int stm32_clkevent_lp_probe(struct platform_device *pdev)
+{
+	struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
+	struct stm32_lp_private *priv;
+	unsigned long rate;
+	int ret, irq;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->reg = ddata->regmap;
+	ret = clk_prepare_enable(ddata->clk);
+	if (ret)
+		return -EINVAL;
+
+	rate = clk_get_rate(ddata->clk);
+	if (!rate) {
+		ret = -EINVAL;
+		goto out_clk_disable;
+	}
+
+	irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
+	if (irq <= 0) {
+		ret = irq;
+		goto out_clk_disable;
+	}
+
+	if (of_property_read_bool(pdev->dev.parent->of_node, "wakeup-source")) {
+		ret = device_init_wakeup(&pdev->dev, true);
+		if (ret)
+			goto out_clk_disable;
+
+		ret = dev_pm_set_wake_irq(&pdev->dev, irq);
+		if (ret)
+			goto out_clk_disable;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, stm32_clkevent_lp_irq_handler,
+			       IRQF_TIMER, pdev->name, &priv->clkevt);
+	if (ret)
+		goto out_clk_disable;
+
+	stm32_clkevent_lp_set_prescaler(priv, &rate);
+
+	stm32_clkevent_lp_init(priv, pdev->dev.parent->of_node, rate);
+
+	priv->dev = &pdev->dev;
+
+	return 0;
+
+out_clk_disable:
+	clk_disable_unprepare(ddata->clk);
+	return ret;
+}
+
+static int stm32_clkevent_lp_remove(struct platform_device *pdev)
+{
+	return -EBUSY; /* cannot unregister clockevent */
+}
+
+static const struct of_device_id stm32_clkevent_lp_of_match[] = {
+	{ .compatible = "st,stm32-lptimer-timer", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stm32_clkevent_lp_of_match);
+
+static struct platform_driver stm32_clkevent_lp_driver = {
+	.probe	= stm32_clkevent_lp_probe,
+	.remove = stm32_clkevent_lp_remove,
+	.driver	= {
+		.name = "stm32-lptimer-timer",
+		.of_match_table = of_match_ptr(stm32_clkevent_lp_of_match),
+	},
+};
+module_platform_driver(stm32_clkevent_lp_driver);
+
+MODULE_ALIAS("platform:stm32-lptimer-timer");
+MODULE_DESCRIPTION("STMicroelectronics STM32 clockevent low power driver");
+MODULE_LICENSE("GPL v2");
-- 
2.15.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ