| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 20 Apr 2020 14:38:50 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Sean Wang <sean.wang@...iatek.com>,
René van Dorst <opensource@...rst.com>,
"David S. Miller" <davem@...emloft.net>
Subject: [PATCH 5.4 12/60] net: ethernet: mediatek: move mt7623 settings out off the mt7530
From: "René van Dorst" <opensource@...rst.com>
[ Upstream commit a5d75538295b06bc6ade1b9da07b9bee57d1c677 ]
Moving mt7623 logic out off mt7530, is required to make hardware setting
consistent after we introduce phylink to mtk driver.
Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support")
Reviewed-by: Sean Wang <sean.wang@...iatek.com>
Tested-by: Sean Wang <sean.wang@...iatek.com>
Signed-off-by: René van Dorst <opensource@...rst.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 24 +++++++++++++++++++++++-
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 8 ++++++++
2 files changed, 31 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -65,6 +65,17 @@ u32 mtk_r32(struct mtk_eth *eth, unsigne
return __raw_readl(eth->base + reg);
}
+u32 mtk_m32(struct mtk_eth *eth, u32 mask, u32 set, unsigned reg)
+{
+ u32 val;
+
+ val = mtk_r32(eth, reg);
+ val &= ~mask;
+ val |= set;
+ mtk_w32(eth, val, reg);
+ return reg;
+}
+
static int mtk_mdio_busy_wait(struct mtk_eth *eth)
{
unsigned long t_start = jiffies;
@@ -193,7 +204,7 @@ static void mtk_mac_config(struct phylin
struct mtk_mac *mac = container_of(config, struct mtk_mac,
phylink_config);
struct mtk_eth *eth = mac->hw;
- u32 mcr_cur, mcr_new, sid;
+ u32 mcr_cur, mcr_new, sid, i;
int val, ge_mode, err;
/* MT76x8 has no hardware settings between for the MAC */
@@ -255,6 +266,17 @@ static void mtk_mac_config(struct phylin
PHY_INTERFACE_MODE_TRGMII)
mtk_gmac0_rgmii_adjust(mac->hw,
state->speed);
+
+ /* mt7623_pad_clk_setup */
+ for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
+ mtk_w32(mac->hw,
+ TD_DM_DRVP(8) | TD_DM_DRVN(8),
+ TRGMII_TD_ODT(i));
+
+ /* Assert/release MT7623 RXC reset */
+ mtk_m32(mac->hw, 0, RXC_RST | RXC_DQSISEL,
+ TRGMII_RCK_CTRL);
+ mtk_m32(mac->hw, RXC_RST, 0, TRGMII_RCK_CTRL);
}
}
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -350,10 +350,13 @@
#define DQSI0(x) ((x << 0) & GENMASK(6, 0))
#define DQSI1(x) ((x << 8) & GENMASK(14, 8))
#define RXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16))
+#define RXC_RST BIT(31)
#define RXC_DQSISEL BIT(30)
#define RCK_CTRL_RGMII_1000 (RXC_DQSISEL | RXCTL_DMWTLAT(2) | DQSI1(16))
#define RCK_CTRL_RGMII_10_100 RXCTL_DMWTLAT(2)
+#define NUM_TRGMII_CTRL 5
+
/* TRGMII RXC control register */
#define TRGMII_TCK_CTRL 0x10340
#define TXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16))
@@ -361,6 +364,11 @@
#define TCK_CTRL_RGMII_1000 TXCTL_DMWTLAT(2)
#define TCK_CTRL_RGMII_10_100 (TXC_INV | TXCTL_DMWTLAT(2))
+/* TRGMII TX Drive Strength */
+#define TRGMII_TD_ODT(i) (0x10354 + 8 * (i))
+#define TD_DM_DRVP(x) ((x) & 0xf)
+#define TD_DM_DRVN(x) (((x) & 0xf) << 4)
+
/* TRGMII Interface mode register */
#define INTF_MODE 0x10390
#define TRGMII_INTF_DIS BIT(0)
Powered by blists - more mailing lists