lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 21 Apr 2020 15:08:44 -0400
From:   "Alex Xu (Hello71)" <alex_y_xu@...oo.ca>
To:     alsa-devel@...a-project.org, Takashi Iwai <tiwai@...e.de>
Cc:     Roy Spliet <nouveau@...iet.org>, linux-kernel@...r.kernel.org,
        linux-pci@...r.kernel.org
Subject: Unrecoverable AER error when resuming from RAM (hda regression in
 5.7-rc2)

With 5.7-rc2, after resuming from suspend to RAM, I get:

[   55.679382] pcieport 0000:00:03.1: AER: Multiple Uncorrected (Non-Fatal) error received: 0000:00:00.0
[   55.679405] pcieport 0000:00:03.1: AER: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
[   55.679410] pcieport 0000:00:03.1: AER:   device [1022:1453] error status/mask=00100000/04400000
[   55.679414] pcieport 0000:00:03.1: AER:    [20] UnsupReq               (First)
[   55.679417] pcieport 0000:00:03.1: AER:   TLP Header: 40000004 0a0000ff fffc0e80 00000000
[   55.679423] amdgpu 0000:0a:00.0: AER: can't recover (no error_detected callback)
[   55.679425] snd_hda_intel 0000:0a:00.1: AER: can't recover (no error_detected callback)
[   55.679455] pcieport 0000:00:03.1: AER: device recovery failed

Then the display freezes and the system basically falls apart (can't 
even sudo reboot -f, need to use magic sysrq).

I bisected this to "ALSA: hda: Skip controller resume if not needed". 
Setting snd_hda_intel.power_save=0 resolves the issue.

I am using an ASRock B450 Pro4 with Realtek HDA codec:

[    1.009400] snd_hda_intel 0000:0a:00.1: enabling device (0000 -> 0002)
[    1.009425] snd_hda_intel 0000:0a:00.1: Force to non-snoop mode
[    1.009653] snd_hda_intel 0000:0c:00.3: enabling device (0000 -> 0002)
[    1.021452] snd_hda_codec_generic hdaudioC0D0: ignore pin 0x7, too many assigned pins
[    1.021461] snd_hda_codec_generic hdaudioC0D0: ignore pin 0x9, too many assigned pins
[    1.021471] snd_hda_codec_generic hdaudioC0D0: ignore pin 0xb, too many assigned pins
[    1.021480] snd_hda_codec_generic hdaudioC0D0: ignore pin 0xd, too many assigned pins
[    1.021482] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[    1.021482] snd_hda_codec_generic hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    1.021483] snd_hda_codec_generic hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    1.021484] snd_hda_codec_generic hdaudioC0D0:    mono: mono_out=0x0
[    1.021484] snd_hda_codec_generic hdaudioC0D0:    dig-out=0x3/0x5
[    1.021485] snd_hda_codec_generic hdaudioC0D0:    inputs:
[    1.046053] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    1.046054] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    1.046055] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    1.046055] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    1.046056] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    1.046057] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    1.046058] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    1.046058] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a

I also have an ASUS RX 480 graphics card with HDMI audio output.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ