[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGb2v67N6t+C8dVKdjuOv1NzD9=3-n0GZQkshy1Pm6PFPJ87dQ@mail.gmail.com>
Date: Tue, 21 Apr 2020 11:48:52 +0800
From: Chen-Yu Tsai <wens@...nel.org>
To: Johan Jonker <jbx6244@...il.com>
Cc: Heiko Stübner <heiko@...ech.de>,
devicetree <devicetree@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
"open list:ARM/Rockchip SoC..." <linux-rockchip@...ts.infradead.org>
Subject: Re: [PATCH 1/3] arm64: dts: rockchip: add bus-width properties to mmc
nodes for rk3328.dtsi
On Fri, Apr 17, 2020 at 2:19 AM Johan Jonker <jbx6244@...il.com> wrote:
>
> 'bus-width' and pinctrl containing the bus-pins
> should be in the same file, so add them to
> all mmc nodes in 'rk3328.dtsi'.
Nope. First of all, pinctrl usage is with pinctrl-N properties, not the
pinctrl device, and there are no defaults set for any of the mmc nodes.
Second, these are board design specific. For example, boards are free to
use just 4 bits for the eMMC if they so desire. So this should be in each
board dts file. If a board is missing this property, fix the board.
This applies to all three patches in the series.
ChenYu
> Signed-off-by: Johan Jonker <jbx6244@...il.com>
> ---
> arch/arm64/boot/dts/rockchip/rk3328.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> index 175060695..db2c3085e 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
> @@ -861,6 +861,7 @@
> clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
> <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
> clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> + bus-width = <4>;
> fifo-depth = <0x100>;
> max-frequency = <150000000>;
> status = "disabled";
> @@ -873,6 +874,7 @@
> clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
> <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
> clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> + bus-width = <4>;
> fifo-depth = <0x100>;
> max-frequency = <150000000>;
> status = "disabled";
> @@ -885,6 +887,7 @@
> clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
> <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
> clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> + bus-width = <8>;
> fifo-depth = <0x100>;
> max-frequency = <150000000>;
> status = "disabled";
> --
> 2.11.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Powered by blists - more mailing lists