[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200421141814.639480-1-jbrunet@baylibre.com>
Date: Tue, 21 Apr 2020 16:18:14 +0200
From: Jerome Brunet <jbrunet@...libre.com>
To: Kevin Hilman <khilman@...libre.com>
Cc: Jerome Brunet <jbrunet@...libre.com>,
linux-amlogic@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] arm64: dts: meson: kvim3: move hdmi to tdm a
The tdmout b is physically routed to the 40 pin header and the tdmout c
is routed to the m2 connector. It makes these interfaces poor
candidates to handle the HDMI 8ch i2s link (2ch i2s * 4 lanes) as it would
force the same link format on the related connectors.
Instead use the TDM A interface. This one is not routed to the outside
world on the vim3, so it can only be used for HDMI.
Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
---
.../dts/amlogic/meson-g12b-khadas-vim3.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index c6c8caed8327..224c890d32d3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -51,11 +51,11 @@ vddcpu_b: regulator-vddcpu-b {
sound {
compatible = "amlogic,axg-sound-card";
model = "G12B-KHADAS-VIM3";
- audio-aux-devs = <&tdmout_b>;
- audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
- "TDMOUT_B IN 1", "FRDDR_B OUT 1",
- "TDMOUT_B IN 2", "FRDDR_C OUT 1",
- "TDM_B Playback", "TDMOUT_B OUT";
+ audio-aux-devs = <&tdmout_a>;
+ audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+ "TDMOUT_A IN 1", "FRDDR_B OUT 0",
+ "TDMOUT_A IN 2", "FRDDR_C OUT 0",
+ "TDM_A Playback", "TDMOUT_A OUT";
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
@@ -80,7 +80,7 @@ dai-link-2 {
/* 8ch hdmi interface */
dai-link-3 {
- sound-dai = <&tdmif_b>;
+ sound-dai = <&tdmif_a>;
dai-format = "i2s";
dai-tdm-slot-tx-mask-0 = <1 1>;
dai-tdm-slot-tx-mask-1 = <1 1>;
@@ -89,7 +89,7 @@ dai-link-3 {
mclk-fs = <256>;
codec {
- sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
};
};
@@ -182,11 +182,11 @@ &pwm_AO_cd {
status = "okay";
};
-&tdmif_b {
+&tdmif_a {
status = "okay";
};
-&tdmout_b {
+&tdmout_a {
status = "okay";
};
--
2.25.2
Powered by blists - more mailing lists