linux-kernel - [PATCH] net: phy: Use IS_ERR() to check and simplify code

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200422081542.8344-1-tangbin@cmss.chinamobile.com>
Date:   Wed, 22 Apr 2020 16:15:42 +0800
From:   Tang Bin <tangbin@...s.chinamobile.com>
To:     andrew@...n.ch, f.fainelli@...il.com, hkallweit1@...il.com,
        linux@...linux.org.uk, davem@...emloft.net
Cc:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Tang Bin <tangbin@...s.chinamobile.com>,
        Zhang Shengju <zhangshengju@...s.chinamobile.com>
Subject: [PATCH] net: phy: Use IS_ERR() to check and simplify code

Use IS_ERR() and PTR_ERR() instead of PTR_ZRR_OR_ZERO()
to simplify code, avoid redundant paramenter definitions
and judgements.

Signed-off-by: Zhang Shengju <zhangshengju@...s.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@...s.chinamobile.com>
---
 drivers/net/phy/mdio_bus.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 9bb9f37f2..b1114f204 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -42,14 +42,11 @@
 
 static int mdiobus_register_gpiod(struct mdio_device *mdiodev)
 {
-	int error;
-
 	/* Deassert the optional reset signal */
 	mdiodev->reset_gpio = gpiod_get_optional(&mdiodev->dev,
 						 "reset", GPIOD_OUT_LOW);
-	error = PTR_ERR_OR_ZERO(mdiodev->reset_gpio);
-	if (error)
-		return error;
+	if (IS_ERR(mdiodev->reset_gpio))
+		return PTR_ERR(mdiodev->reset_gpio);
 
 	if (mdiodev->reset_gpio)
 		gpiod_set_consumer_name(mdiodev->reset_gpio, "PHY reset");
-- 
2.20.1.windows.1