linux-kernel - [PATCH 4.9 026/125] media: ti-vpe: cal: fix disable

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200422095037.543821111@linuxfoundation.org>
Date:   Wed, 22 Apr 2020 11:55:43 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Benoit Parrot <bparrot@...com>,
        Hans Verkuil <hverkuil-cisco@...all.nl>,
        Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
Subject: [PATCH 4.9 026/125] media: ti-vpe: cal: fix disable_irqs to only the intended target

From: Benoit Parrot <bparrot@...com>

commit 1db56284b9da9056093681f28db48a09a243274b upstream.

disable_irqs() was mistakenly disabling all interrupts when called.
This cause all port stream to stop even if only stopping one of them.

Cc: stable <stable@...r.kernel.org>
Signed-off-by: Benoit Parrot <bparrot@...com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@...all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/media/platform/ti-vpe/cal.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -548,16 +548,16 @@ static void enable_irqs(struct cal_ctx *
 
 static void disable_irqs(struct cal_ctx *ctx)
 {
+	u32 val;
+
 	/* Disable IRQ_WDMA_END 0/1 */
-	reg_write_field(ctx->dev,
-			CAL_HL_IRQENABLE_CLR(2),
-			CAL_HL_IRQ_CLEAR,
-			CAL_HL_IRQ_MASK(ctx->csi2_port));
+	val = 0;
+	set_field(&val, CAL_HL_IRQ_CLEAR, CAL_HL_IRQ_MASK(ctx->csi2_port));
+	reg_write(ctx->dev, CAL_HL_IRQENABLE_CLR(2), val);
 	/* Disable IRQ_WDMA_START 0/1 */
-	reg_write_field(ctx->dev,
-			CAL_HL_IRQENABLE_CLR(3),
-			CAL_HL_IRQ_CLEAR,
-			CAL_HL_IRQ_MASK(ctx->csi2_port));
+	val = 0;
+	set_field(&val, CAL_HL_IRQ_CLEAR, CAL_HL_IRQ_MASK(ctx->csi2_port));
+	reg_write(ctx->dev, CAL_HL_IRQENABLE_CLR(3), val);
 	/* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
 	reg_write(ctx->dev, CAL_CSI2_VC_IRQENABLE(1), 0);
 }