lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200423182750.GA32451@pc636>
Date:   Thu, 23 Apr 2020 20:27:50 +0200
From:   Uladzislau Rezki <urezki@...il.com>
To:     "Paul E. McKenney" <paulmck@...nel.org>,
        Johannes Weiner <hannes@...xchg.org>
Cc:     Johannes Weiner <hannes@...xchg.org>,
        Joel Fernandes <joel@...lfernandes.org>,
        Uladzislau Rezki <urezki@...il.com>,
        linux-kernel@...r.kernel.org,
        Josh Triplett <josh@...htriplett.org>,
        Lai Jiangshan <jiangshanlai@...il.com>,
        Mathieu Desnoyers <mathieu.desnoyers@...icios.com>,
        rcu@...r.kernel.org, Steven Rostedt <rostedt@...dmis.org>
Subject: Re: [PATCH RFC] rcu/tree: Refactor object allocation and try harder
 for array allocation

On Thu, Apr 23, 2020 at 11:02:49AM -0700, Paul E. McKenney wrote:
> On Thu, Apr 23, 2020 at 01:48:31PM -0400, Johannes Weiner wrote:
> > On Wed, Apr 22, 2020 at 08:35:03AM -0700, Paul E. McKenney wrote:
> > > On Wed, Apr 22, 2020 at 10:57:52AM -0400, Johannes Weiner wrote:
> > > > On Thu, Apr 16, 2020 at 11:01:00AM -0700, Paul E. McKenney wrote:
> > > > > On Thu, Apr 16, 2020 at 09:17:45AM -0400, Joel Fernandes wrote:
> > > > > > On Thu, Apr 16, 2020 at 12:30:07PM +0200, Uladzislau Rezki wrote:
> > > > > > > I have a question about dynamic attaching of the rcu_head. Do you think
> > > > > > > that we should drop it? We have it because of it requires 8 + syzeof(struct rcu_head)
> > > > > > > bytes and is used when we can not allocate 1 page what is much more for array purpose.
> > > > > > > Therefore, dynamic attaching can succeed because of using SLAB and requesting much
> > > > > > > less memory then one page. There will be higher chance of bypassing synchronize_rcu()
> > > > > > > and inlining freeing on a stack.
> > > > > > > 
> > > > > > > I agree that we should not use GFP_* flags instead we could go with GFP_NOWAIT |
> > > > > > > __GFP_NOWARN when head attaching only. Also dropping GFP_ATOMIC to keep
> > > > > > > atomic reserved memory for others.
> > > > > 
> > > > > I must defer to people who understand the GFP flags better than I do.
> > > > > The suggestion of __GFP_RETRY_MAYFAIL for no memory pressure (or maybe
> > > > > when the CPU's reserve is not yet full) and __GFP_NORETRY otherwise came
> > > > > from one of these people.  ;-)
> > > > 
> > > > The exact flags we want here depends somewhat on the rate and size of
> > > > kfree_rcu() bursts we can expect. We may want to start with one set
> > > > and instrument allocation success rates.
> > > > 
> > > > Memory tends to be fully consumed by the filesystem cache, so some
> > > > form of light reclaim is necessary for almost all allocations.
> > > > 
> > > > GFP_NOWAIT won't do any reclaim by itself, but it'll wake kswapd.
> > > > Kswapd maintains a small pool of free pages so that even allocations
> > > > that are allowed to enter reclaim usually don't have to. It would be
> > > > safe for RCU to dip into that.
> > > > 
> > > > However, there are some cons to using it:
> > > > 
> > > > - Depending on kfree_rcu() burst size, this pool could exhaust (it's
> > > > usually about half a percent of memory, but is affected by sysctls),
> > > > and then it would fail NOWAIT allocations until kswapd has caught up.
> > > > 
> > > > - This pool is shared by all GFP_NOWAIT users, and many (most? all?)
> > > > of them cannot actually sleep. Often they would have to drop locks,
> > > > restart list iterations, or suffer some other form of deterioration to
> > > > work around failing allocations.
> > > > 
> > > > Since rcu wouldn't have anything better to do than sleep at this
> > > > juncture, it may as well join the reclaim effort.
> > > > 
> > > > Using __GFP_NORETRY or __GFP_RETRY_MAYFAIL would allow them that
> > > > without exerting too much pressure on the VM.
> > > 
> > > Thank you for looking this over and for the feedback!
> > > 
> > > Good point on the sleeping.  My assumption has been that sleeping waiting
> > > for a grace period was highly likely to allow memory to eventually be
> > > freed, and that there is a point of diminishing returns beyond which
> > > adding additional tasks to the reclaim effort does not help much.
> > 
> > There is when the VM is struggling, but not necessarily when there is
> > simply a high, concurrent rate of short-lived file cache allocations.
> > 
> > Kswapd can easily reclaim gigabytes of clean page cache each second,
> > but there might be enough allocation concurrency from other threads to
> > starve a kfree_rcu() that only makes a very cursory attempt at getting
> > memory out of being able to snap up some of those returns.
> > 
> > In that scenario it makes sense to be a bit more persistent, or even
> > help scale out the concurrency of reclaim to that of allocations.
> > 
> > > Here are some strategies right offhand when sleeping is required:
> > > 
> > > 1.	Always sleep in synchronize_rcu() in order to (with high
> > > 	probability) free the memory.  This might mean that the reclaim
> > > 	effort goes slower than would be good.
> > > 
> > > 2.	Always sleep in the memory allocator in order to help reclaim
> > > 	along.	(This is a strawman version of what I expect your
> > > 	proposal really is, but putting it here for completeness, please
> > > 	see below.)
> > > 
> > > 3.	Always sleep in the memory allocator in order to help reclaim
> > > 	along, but return failure at some point.  Then the caller
> > > 	invokes synchronize_rcu().  When to return failure?
> > > 
> > > 	o	After some substantial but limited amount of effort has
> > > 		been spent on reclaim.
> > > 
> > > 	o	When it becomes likely that further reclaim effort
> > > 		is not going to free up additional memory.
> > > 
> > > I am guessing that you are thinking in terms of specifying GFP flags to
> > > result in some variant of #3.
> > 
> > Yes, although I would add
> > 
> > 	o	After making more than one attempt at the freelist to
> > 		prevent merely losing races when the allocator/reclaim
> > 		subsystem is mobbed by a high concurrency of requests.
> > 
> > __GFP_NORETRY (despite its name) accomplishes this.
> > 
> > __GFP_RETRY_MAYFAIL is yet more persistent, but may retry for quite a
> > while if the allocation keeps losing the race for a page. This
> > increases the chance of the allocation eventually suceeding, but also
> > the risk of 1) trying to get memory for longer than a
> > synchronize_rcu() might have taken and 2) exerting more temporary
> > memory pressure on the workload* than might be productive.
> > 
> > So I'm inclined to suggest __GFP_NORETRY as a starting point, and make
> > further decisions based on instrumentation of the success rates of
> > these opportunistic allocations.
> > 
> > * Reclaim and OOM handling will be fine since no reserves are tapped
> 
> Thank you for the explanation!  Makes sense to me!!!
> 
> Joel, Vlad, does this seem reasonable?
>
To me that makes sense. I think such strategy does fit to what we do,
i mean we need to release memory asap. Doing it without initiating of
long process of memory reclaim and do it only lightly(what __GFP_NORETRY does)
is a good approach. We have an option to fallback to synchronize_rcu().

But that is for sleepable context.

I have a question about non-sleeping context as well and how we allocate one
page:

<snip>
   bnode = (struct kvfree_rcu_bulk_data *)
       __get_free_page(GFP_NOWAIT | __GFP_NOWARN);

<snip>

Johannes, i saw you mentioned earlier that waking up a kswapd is not a
good idea, what actually GFP_NOWAIT does. Do you recommend to exclude
it? Also to replace by what? __GFP_HIGH|__GFP_ATOMIC?

Thank you in advance!

--
Vlad Rezki

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ