linux-kernel - Re: [PATCH] phy: qualcomm: usb-hs-28nm: Prepare clocks in init

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 22 Apr 2020 20:13:07 -0700
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Kishon Vijay Abraham I <kishon@...com>,
        Bryan O'Donoghue <bryan.odonoghue@...aro.org>
Cc:     Shawn Guo <shawn.guo@...aro.org>, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH] phy: qualcomm: usb-hs-28nm: Prepare clocks in init

On Tue 07 Apr 18:28 PDT 2020, Bjorn Andersson wrote:

> The AHB clock must be on for qcom_snps_hsphy_init() to be able to write
> the initialization sequence to the hardware, so move the clock
> enablement to phy init and exit.
> 
> Fixes: 67b27dbeac4d ("phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver")
> Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>

Kishon, can we have this picked up?

Thanks,
Bjorn

> ---
>  drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c | 32 ++++++++++++++-------
>  1 file changed, 21 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
> index d998e65c89c8..a52a9bf13b75 100644
> --- a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
> +++ b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
> @@ -160,18 +160,11 @@ static int qcom_snps_hsphy_power_on(struct phy *phy)
>  	ret = regulator_bulk_enable(VREG_NUM, priv->vregs);
>  	if (ret)
>  		return ret;
> -	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
> -	if (ret)
> -		goto err_disable_regulator;
> +
>  	qcom_snps_hsphy_disable_hv_interrupts(priv);
>  	qcom_snps_hsphy_exit_retention(priv);
>  
>  	return 0;
> -
> -err_disable_regulator:
> -	regulator_bulk_disable(VREG_NUM, priv->vregs);
> -
> -	return ret;
>  }
>  
>  static int qcom_snps_hsphy_power_off(struct phy *phy)
> @@ -180,7 +173,6 @@ static int qcom_snps_hsphy_power_off(struct phy *phy)
>  
>  	qcom_snps_hsphy_enter_retention(priv);
>  	qcom_snps_hsphy_enable_hv_interrupts(priv);
> -	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
>  	regulator_bulk_disable(VREG_NUM, priv->vregs);
>  
>  	return 0;
> @@ -266,21 +258,39 @@ static int qcom_snps_hsphy_init(struct phy *phy)
>  	struct hsphy_priv *priv = phy_get_drvdata(phy);
>  	int ret;
>  
> -	ret = qcom_snps_hsphy_reset(priv);
> +	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
>  	if (ret)
>  		return ret;
>  
> +	ret = qcom_snps_hsphy_reset(priv);
> +	if (ret)
> +		goto disable_clocks;
> +
>  	qcom_snps_hsphy_init_sequence(priv);
>  
>  	ret = qcom_snps_hsphy_por_reset(priv);
>  	if (ret)
> -		return ret;
> +		goto disable_clocks;
> +
> +	return 0;
> +
> +disable_clocks:
> +	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
> +	return ret;
> +}
> +
> +static int qcom_snps_hsphy_exit(struct phy *phy)
> +{
> +	struct hsphy_priv *priv = phy_get_drvdata(phy);
> +
> +	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
>  
>  	return 0;
>  }
>  
>  static const struct phy_ops qcom_snps_hsphy_ops = {
>  	.init = qcom_snps_hsphy_init,
> +	.exit = qcom_snps_hsphy_exit,
>  	.power_on = qcom_snps_hsphy_power_on,
>  	.power_off = qcom_snps_hsphy_power_off,
>  	.set_mode = qcom_snps_hsphy_set_mode,
> -- 
> 2.24.0
>