| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200423050120.GO1868936@builder.lan>
Date: Wed, 22 Apr 2020 22:01:20 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Suman Anna <s-anna@...com>
Cc: Mathieu Poirier <mathieu.poirier@...aro.org>,
linux-remoteproc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Loic Pallardy <loic.pallardy@...com>
Subject: Re: [PATCH 1/2] remoteproc: Add prepare and unprepare ops
On Tue 21 Apr 07:12 PDT 2020, Suman Anna wrote:
> On 4/20/20 9:52 PM, Bjorn Andersson wrote:
> > On Thu 16 Apr 17:20 PDT 2020, Suman Anna wrote:
> >
> > > From: Loic Pallardy <loic.pallardy@...com>
> > >
> > > On some SoC architecture, it is needed to enable HW like
> > > clock, bus, regulator, memory region... before loading
> > > co-processor firmware.
> > >
> > > This patch introduces prepare and unprepare ops to execute
> > > platform specific function before firmware loading and after
> > > stop execution.
> > >
> > > Signed-off-by: Loic Pallardy <loic.pallardy@...com>
> > > Signed-off-by: Suman Anna <s-anna@...com>
> > > Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> > > Reviewed-by: Mathieu Poirier <mathieu.poirier@...aro.org>
> >
> > Do we have an inbound user of these new oops?
>
> Yes, both the TI K3 R5F and DSP remoteproc drivers use these ops, the
> patches are already on the lists.
>
Thanks for confirming Suman, I'll apply this.
Regards,
Bjorn
> regards
> Suman
>
> >
> > Regards,
> > Bjorn
> >
> > > ---
> > > v1:
> > > - Make the direct ops into inline helper functions in line
> > > with the comments on the MCU sync series (v1 comments).
> > > No change in functionality.
> > > - Picked up the Reviewed-by tags
> > > v0: https://patchwork.kernel.org/patch/11456383/
> > >
> > > drivers/remoteproc/remoteproc_core.c | 15 ++++++++++++++-
> > > drivers/remoteproc/remoteproc_internal.h | 16 ++++++++++++++++
> > > include/linux/remoteproc.h | 4 ++++
> > > 3 files changed, 34 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> > > index d681eeb962b6..e38f627059ac 100644
> > > --- a/drivers/remoteproc/remoteproc_core.c
> > > +++ b/drivers/remoteproc/remoteproc_core.c
> > > @@ -1394,12 +1394,19 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
> > > return ret;
> > > }
> > > + /* Prepare rproc for firmware loading if needed */
> > > + ret = rproc_prepare_device(rproc);
> > > + if (ret) {
> > > + dev_err(dev, "can't prepare rproc %s: %d\n", rproc->name, ret);
> > > + goto disable_iommu;
> > > + }
> > > +
> > > rproc->bootaddr = rproc_get_boot_addr(rproc, fw);
> > > /* Load resource table, core dump segment list etc from the firmware */
> > > ret = rproc_parse_fw(rproc, fw);
> > > if (ret)
> > > - goto disable_iommu;
> > > + goto unprepare_rproc;
> > > /* reset max_notifyid */
> > > rproc->max_notifyid = -1;
> > > @@ -1433,6 +1440,9 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
> > > kfree(rproc->cached_table);
> > > rproc->cached_table = NULL;
> > > rproc->table_ptr = NULL;
> > > +unprepare_rproc:
> > > + /* release HW resources if needed */
> > > + rproc_unprepare_device(rproc);
> > > disable_iommu:
> > > rproc_disable_iommu(rproc);
> > > return ret;
> > > @@ -1838,6 +1848,9 @@ void rproc_shutdown(struct rproc *rproc)
> > > /* clean up all acquired resources */
> > > rproc_resource_cleanup(rproc);
> > > + /* release HW resources if needed */
> > > + rproc_unprepare_device(rproc);
> > > +
> > > rproc_disable_iommu(rproc);
> > > /* Free the copy of the resource table */
> > > diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
> > > index b389dc79da81..101e6be8d240 100644
> > > --- a/drivers/remoteproc/remoteproc_internal.h
> > > +++ b/drivers/remoteproc/remoteproc_internal.h
> > > @@ -64,6 +64,22 @@ struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
> > > struct rproc_mem_entry *
> > > rproc_find_carveout_by_name(struct rproc *rproc, const char *name, ...);
> > > +static inline int rproc_prepare_device(struct rproc *rproc)
> > > +{
> > > + if (rproc->ops->prepare)
> > > + return rproc->ops->prepare(rproc);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static inline int rproc_unprepare_device(struct rproc *rproc)
> > > +{
> > > + if (rproc->ops->unprepare)
> > > + return rproc->ops->unprepare(rproc);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > static inline
> > > int rproc_fw_sanity_check(struct rproc *rproc, const struct firmware *fw)
> > > {
> > > diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> > > index 38607107b7cb..b8481ac969f1 100644
> > > --- a/include/linux/remoteproc.h
> > > +++ b/include/linux/remoteproc.h
> > > @@ -355,6 +355,8 @@ enum rsc_handling_status {
> > > /**
> > > * struct rproc_ops - platform-specific device handlers
> > > + * @prepare: prepare device for code loading
> > > + * @unprepare: unprepare device after stop
> > > * @start: power on the device and boot it
> > > * @stop: power off the device
> > > * @kick: kick a virtqueue (virtqueue id given as a parameter)
> > > @@ -373,6 +375,8 @@ enum rsc_handling_status {
> > > * panic at least the returned number of milliseconds
> > > */
> > > struct rproc_ops {
> > > + int (*prepare)(struct rproc *rproc);
> > > + int (*unprepare)(struct rproc *rproc);
> > > int (*start)(struct rproc *rproc);
> > > int (*stop)(struct rproc *rproc);
> > > void (*kick)(struct rproc *rproc, int vqid);
> > > --
> > > 2.26.0
> > >
>
Powered by blists - more mailing lists