| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200423105438.29034-4-psampat@linux.ibm.com>
Date: Thu, 23 Apr 2020 16:24:38 +0530
From: Pratik Rajesh Sampat <psampat@...ux.ibm.com>
To: linux-kernel@...r.kernel.org, linuxppc-dev@...abs.org,
mpe@...erman.id.au, skiboot@...ts.ozlabs.org, oohall@...il.com,
ego@...ux.vnet.ibm.com, linuxram@...ibm.com,
pratik.r.sampat@...il.com, psampat@...ux.ibm.com
Subject: [PATCH v8 3/3] Self save API integration
The commit makes the self save API available outside the firmware by defining
an OPAL wrapper.
This wrapper has a similar interface to that of self restore and expects the
cpu pir, SPR number, minus the value of that SPR to be passed in its
paramters and returns OPAL_SUCCESS on success. It adds a device-tree
node signifying support for self-save after verifying the stop API
version compatibility.
The commit also documents both the self-save and the self-restore API
calls along with their working and usage.
Signed-off-by: Pratik Rajesh Sampat <psampat@...ux.ibm.com>
---
doc/opal-api/opal-slw-self-save-reg-181.rst | 51 ++++++++++
doc/opal-api/opal-slw-set-reg-100.rst | 5 +
doc/power-management.rst | 48 +++++++++
hw/slw.c | 106 ++++++++++++++++++++
include/opal-api.h | 3 +-
include/p9_stop_api.H | 18 ++++
include/skiboot.h | 3 +
7 files changed, 233 insertions(+), 1 deletion(-)
create mode 100644 doc/opal-api/opal-slw-self-save-reg-181.rst
diff --git a/doc/opal-api/opal-slw-self-save-reg-181.rst b/doc/opal-api/opal-slw-self-save-reg-181.rst
new file mode 100644
index 00000000..f20e9b81
--- /dev/null
+++ b/doc/opal-api/opal-slw-self-save-reg-181.rst
@@ -0,0 +1,51 @@
+.. OPAL_SLW_SELF_SAVE_REG:
+
+OPAL_SLW_SELF_SAVE_REG
+======================
+
+.. code-block:: c
+
+ #define OPAL_SLW_SELF_SAVE_REG 181
+
+ int64_t opal_slw_self_save_reg(uint64_t cpu_pir, uint64_t sprn);
+
+:ref:`OPAL_SLW_SELF_SAVE_REG` is used to inform low-level firmware to save
+the current contents of the SPR before entering a state of loss and
+also restore the content back on waking up from a deep stop state.
+
+An OPAL call `OPAL_SLW_SET_REG` exists which is similar in function as
+saving and restoring the SPR, with one difference being that the value of the
+SPR must also be supplied in the parameters.
+Complete reference: doc/opal-api/opal-slw-set-reg-100.rst
+
+Parameters
+----------
+
+``uint64_t cpu_pir``
+ This parameter specifies the pir of the cpu for which the call is being made.
+``uint64_t sprn``
+ This parameter specifies the spr number as mentioned in p9_stop_api.H
+ The list of SPRs supported is as follows.
+ P9_STOP_SPR_DAWR,
+ P9_STOP_SPR_HSPRG0,
+ P9_STOP_SPR_LDBAR,
+ P9_STOP_SPR_LPCR,
+ P9_STOP_SPR_PSSCR,
+ P9_STOP_SPR_MSR,
+ P9_STOP_SPR_HRMOR,
+ P9_STOP_SPR_HMEER,
+ P9_STOP_SPR_PMCR,
+ P9_STOP_SPR_PTCR
+
+ The property "ibm,opal-self-save" is supplied to the device tree to advterise
+ support.
+
+Returns
+-------
+
+:ref:`OPAL_UNSUPPORTED`
+ If spr restore is not supported by pore engine.
+:ref:`OPAL_PARAMETER`
+ Invalid handle for the pir/chip
+:ref:`OPAL_SUCCESS`
+ On success
diff --git a/doc/opal-api/opal-slw-set-reg-100.rst b/doc/opal-api/opal-slw-set-reg-100.rst
index 2e8f1bd6..ee3e68ce 100644
--- a/doc/opal-api/opal-slw-set-reg-100.rst
+++ b/doc/opal-api/opal-slw-set-reg-100.rst
@@ -21,6 +21,11 @@ In Power 9, it uses p9_stop_save_cpureg(), api provided by self restore code,
to inform the spr with their corresponding values with which they
must be restored.
+An OPAL call `OPAL_SLW_SELF_SAVE_REG` exists which is similar in function
+saving and restoring the SPR, with one difference being that the value of the
+SPR doesn't need to be passed in the parameters, only with the SPR number
+the firmware can identify, save and restore the values for the same.
+Complete reference: doc/opal-api/opal-slw-self-save-reg-181.rst
Parameters
----------
diff --git a/doc/power-management.rst b/doc/power-management.rst
index 76491a71..d6bd5358 100644
--- a/doc/power-management.rst
+++ b/doc/power-management.rst
@@ -15,3 +15,51 @@ On boot, specific stop states can be disabled via setting a mask. For example,
to disable all but stop 0,1,2, use ~0xE0000000. ::
nvram -p ibm,skiboot --update-config opal-stop-state-disable-mask=0x1FFFFFFF
+
+Saving and restoring Special Purpose Registers(SPRs)
+----------------------------------------------------
+
+When a CPU wakes up from a deep stop state which can result in
+hypervisor state loss, all the SPRs are lost. The Linux Kernel expects
+a small set of SPRs to contain an expected value when the CPU wakes up
+from such a deep stop state. The microcode firmware provides the
+following two APIs, collectively known as the stop-APIs, to allow the
+kernel/OPAL to specify this set of SPRs and the value that they need
+to be restored with on waking up from a deep stop state.
+
+Self-restore:
+int64_t opal_slw_set_reg(uint64_t cpu_pir, uint64_t sprn, uint64_t val);
+The SPR number and the value of the that SPR must be restored with on
+wakeup from the deep-stop state must be specified. When this call is
+made, the microcode inserts instruction into the HOMER region to
+restore the content of the SPR to the specified value on wakeup from a
+deep-stop state. These instructions are executed by the CPU as soon as
+it wakes up from a deep stop state. The call is to be made once per
+SPR.
+
+Self-Save:
+int64_t opal_slw_self_save_reg(uint64_t cpu_pir, uint64_t sprn);
+Only the SPR number needs to be specified. When this call is made, the
+microcode inserts instructions into the HOMER region to save the
+current value of the SPR before the CPU goes to a deep stop state, and
+restores the value back when the CPU wakes up from a deep stop state.
+These instructions are correspondingly executed just before and after
+the CPU goes/comes out of a deep stop state. This call can be made
+once per SPR.
+
+The key difference between self-save and self-restore is the
+use-case. If the Kernel expects the SPR to contain a particular value
+on waking up from a deep-stop state, that wasn't the value of that SPR
+before entering deep stop-state, then self-restore is preferable.
+Also in a case where SPR does not change across the lifetime
+self-restore is more efficient as when the value is same the memeory location
+is not updated.
+
+When deep stop states are to be supported in an Ultravisor
+environment, since HOMER is in a secure region, the stop-api cannot
+update the HOMER if invoked from a context when the OPAL/Kernel is
+executing without the ultravisor privilege. In this scenario, at the
+time of early OPAL boot, while OPAL has ultravisor privileges, it can
+make the self-save stop-api call for all the supported SPRs, so that
+the microcode in the HOMER will always save and restore all the
+supported SPRs during entry/exit from a deep stop state.
diff --git a/hw/slw.c b/hw/slw.c
index beb129a8..8423eeaf 100644
--- a/hw/slw.c
+++ b/hw/slw.c
@@ -35,6 +35,43 @@ static bool slw_current_le = false;
enum wakeup_engine_states wakeup_engine_state = WAKEUP_ENGINE_NOT_PRESENT;
bool has_deep_states = false;
+/**
+ * The struct and SPR list is partially consistent with libpore/p9_stop_api.c
+ */
+/**
+ * @brief summarizes attributes associated with a SPR register.
+ */
+typedef struct
+{
+ uint32_t iv_sprId;
+ bool iv_isThreadScope;
+ uint32_t iv_saveMaskPos;
+
+} StopSprReg_t;
+
+/**
+ * @brief a true in the table below means register is of scope thread
+ * whereas a false meanse register is of scope core.
+ * The number is the bit position on a uint32_t mask
+ */
+
+static const StopSprReg_t g_sprRegister[] =
+{
+ { P9_STOP_SPR_DAWR, true, 1 },
+ { P9_STOP_SPR_HSPRG0, true, 3 },
+ { P9_STOP_SPR_LDBAR, true, 4, },
+ { P9_STOP_SPR_LPCR, true, 5 },
+ { P9_STOP_SPR_PSSCR, true, 6 },
+ { P9_STOP_SPR_MSR, true, 7 },
+ { P9_STOP_SPR_HRMOR, false, 255 },
+ { P9_STOP_SPR_HID, false, 21 },
+ { P9_STOP_SPR_HMEER, false, 22 },
+ { P9_STOP_SPR_PMCR, false, 23 },
+ { P9_STOP_SPR_PTCR, false, 24 },
+};
+
+static const uint32_t MAX_SPR_SUPPORTED = ARRAY_SIZE(g_sprRegister);
+
DEFINE_LOG_ENTRY(OPAL_RC_SLW_INIT, OPAL_PLATFORM_ERR_EVT, OPAL_SLW,
OPAL_PLATFORM_FIRMWARE, OPAL_PREDICTIVE_ERR_GENERAL,
OPAL_NA);
@@ -720,11 +757,14 @@ void add_cpu_idle_state_properties(void)
struct cpu_idle_states *states;
struct proc_chip *chip;
int nr_states;
+ int rc;
bool can_sleep = true;
bool has_stop_inst = false;
+ bool has_self_save = true;
u8 i;
+ u64 compVector = -1;
fdt64_t *pm_ctrl_reg_val_buf;
fdt64_t *pm_ctrl_reg_mask_buf;
u32 supported_states_mask;
@@ -766,6 +806,20 @@ void add_cpu_idle_state_properties(void)
*/
chip = next_chip(NULL);
assert(chip);
+ rc = proc_stop_api_discover_capability((void *) chip->homer_base,
+ &compVector);
+ if (rc == STOP_SAVE_ARG_INVALID_IMG) {
+ prlog(PR_DEBUG, "HOMER BASE INVALID\n");
+ return;
+ } else if (rc == STOP_SAVE_API_IMG_INCOMPATIBLE) {
+ prlog(PR_DEBUG, "STOP API running incompatible versions\n");
+ if ((compVector & SELF_RESTORE_VER_MISMATCH) == 0) {
+ prlog(PR_DEBUG, "Self-save API unsupported\n");
+ has_self_save = false;
+ }
+ }
+ if (has_self_save)
+ dt_add_property(power_mgt, "ibm,opal-self-save", NULL, 0);
if (chip->type == PROC_CHIP_P9_NIMBUS ||
chip->type == PROC_CHIP_P9_CUMULUS ||
chip->type == PROC_CHIP_P9P) {
@@ -1446,6 +1500,58 @@ int64_t opal_slw_set_reg(uint64_t cpu_pir, uint64_t sprn, uint64_t val)
opal_call(OPAL_SLW_SET_REG, opal_slw_set_reg, 3);
+int64_t opal_slw_self_save_reg(uint64_t cpu_pir, uint64_t sprn)
+{
+ struct cpu_thread * c = find_cpu_by_pir(cpu_pir);
+ uint32_t save_reg_vector = 0;
+ struct proc_chip * chip;
+ int rc;
+ int index;
+
+ if (!c) {
+ prlog(PR_DEBUG, "SLW: Unknown thread with pir %x\n",
+ (u32) cpu_pir);
+ return OPAL_PARAMETER;
+ }
+
+ chip = get_chip(c->chip_id);
+ if (!chip) {
+ prlog(PR_DEBUG, "SLW: Unknown chip for thread with pir %x\n",
+ (u32) cpu_pir);
+ return OPAL_PARAMETER;
+ }
+ if (proc_gen != proc_gen_p9 || !has_deep_states) {
+ prlog(PR_DEBUG, "SLW: Self-save feature unsupported\n");
+ return OPAL_UNSUPPORTED;
+ }
+ if (wakeup_engine_state != WAKEUP_ENGINE_PRESENT) {
+ log_simple_error(&e_info(OPAL_RC_SLW_REG),
+ "SLW: wakeup_engine in bad state=%d chip=%x\n",
+ wakeup_engine_state, chip->id);
+ return OPAL_INTERNAL_ERROR;
+ }
+ for (index = 0; index < MAX_SPR_SUPPORTED; ++index) {
+ if (sprn == (CpuReg_t) g_sprRegister[index].iv_sprId) {
+ save_reg_vector = PPC_BIT32(
+ g_sprRegister[index].iv_saveMaskPos);
+ break;
+ }
+ }
+ if (save_reg_vector == 0)
+ return OPAL_INTERNAL_ERROR;
+ rc = p9_stop_save_cpureg_control((void *) chip->homer_base,
+ cpu_pir, save_reg_vector);
+
+ if (rc) {
+ log_simple_error(&e_info(OPAL_RC_SLW_REG),
+ "SLW: Failed to save vector %x for CPU %x\n",
+ save_reg_vector, c->pir);
+ return OPAL_INTERNAL_ERROR;
+ }
+ return OPAL_SUCCESS;
+}
+opal_call(OPAL_SLW_SELF_SAVE_REG, opal_slw_self_save_reg, 2);
+
void slw_init(void)
{
struct proc_chip *chip;
diff --git a/include/opal-api.h b/include/opal-api.h
index e90cab1e..1607a89b 100644
--- a/include/opal-api.h
+++ b/include/opal-api.h
@@ -227,7 +227,8 @@
#define OPAL_SECVAR_ENQUEUE_UPDATE 178
#define OPAL_PHB_SET_OPTION 179
#define OPAL_PHB_GET_OPTION 180
-#define OPAL_LAST 180
+#define OPAL_SLW_SELF_SAVE_REG 181
+#define OPAL_LAST 181
#define QUIESCE_HOLD 1 /* Spin all calls at entry */
#define QUIESCE_REJECT 2 /* Fail all calls with OPAL_BUSY */
diff --git a/include/p9_stop_api.H b/include/p9_stop_api.H
index cb5ffd6f..09ce3dc1 100644
--- a/include/p9_stop_api.H
+++ b/include/p9_stop_api.H
@@ -34,6 +34,8 @@
///
/// @file p9_stop_api.H
/// @brief describes STOP API which create/manipulate STOP image.
+/// This header need not be consistent, however is a subset of the
+/// libpore/p9_stop_api.H counterpart
///
// *HWP HW Owner : Greg Still <stillgs@...ibm.com>
// *HWP FW Owner : Prem Shanker Jha <premjha2@...ibm.com>
@@ -58,6 +60,7 @@ typedef enum
P9_STOP_SPR_HRMOR = 313, // core register
P9_STOP_SPR_LPCR = 318, // thread register
P9_STOP_SPR_HMEER = 337, // core register
+ P9_STOP_SPR_PTCR = 464, // core register
P9_STOP_SPR_LDBAR = 850, // thread register
P9_STOP_SPR_PSSCR = 855, // thread register
P9_STOP_SPR_PMCR = 884, // core register
@@ -247,6 +250,21 @@ StopReturnCode_t p9_stop_save_scom( void* const i_pImage,
const ScomOperation_t i_operation,
const ScomSection_t i_section );
+/**
+ * @brief Facilitates self save and restore of a list of SPRs of a thread.
+ * @param[in] i_pImage points to the start of HOMER image of P9 chip.
+ * @param[in] i_pir PIR associated with thread
+ * @param[in] i_saveRegVector bit vector representing SPRs that needs to be restored.
+ * @return STOP_SAVE_SUCCESS if API succeeds, error code otherwise.
+ * @note SPR save vector is a bit vector. For each SPR supported,
+ * there is an associated bit position in the bit vector.Refer
+ * to definition of SprBitPositionList_t to determine bit position
+ * associated with a particular SPR.
+ */
+StopReturnCode_t
+p9_stop_save_cpureg_control( void* i_pImage, const uint64_t i_pir,
+ const uint32_t i_saveRegVector );
+
/**
* @brief verifies if API is compatible of current HOMER image.
* @param[in] i_pImage points to the start of HOMER image of P9 chip.
diff --git a/include/skiboot.h b/include/skiboot.h
index 30ff500c..9ced240e 100644
--- a/include/skiboot.h
+++ b/include/skiboot.h
@@ -306,6 +306,9 @@ extern void nx_p9_rng_late_init(void);
/* SLW reinit function for switching core settings */
extern int64_t slw_reinit(uint64_t flags);
+/* Self save SPR before entering the stop state */
+extern int64_t opal_slw_self_save_reg(uint64_t cpu_pir, uint64_t sprn);
+
/* Patch SPR in SLW image */
extern int64_t opal_slw_set_reg(uint64_t cpu_pir, uint64_t sprn, uint64_t val);
--
2.25.1
Powered by blists - more mailing lists