Message-ID: <20200423154135.38b0ec25@why>
Date:   Thu, 23 Apr 2020 15:41:35 +0100
From:   Marc Zyngier <maz@...nel.org>
To:     Jiaxun Yang <jiaxun.yang@...goat.com>
Cc:     linux-mips@...r.kernel.org, Thomas Gleixner <tglx@...utronix.de>,
        Jason Cooper <jason@...edaemon.net>,
        Rob Herring <robh+dt@...nel.org>,
        Huacai Chen <chenhc@...ote.com>, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: Re: [PATCH 5/6] irqchip: Add Loongson PCH MSI controller

On Wed, 22 Apr 2020 22:24:25 +0800
Jiaxun Yang <jiaxun.yang@...goat.com> wrote:

> This controller appears on Loongson-7A family of PCH to transform
> interrupts from PCI MSI into HyperTransport vectorized interrrupts
> and send them to procrssor's HT vector controller.
> 
> Signed-off-by: Jiaxun Yang <jiaxun.yang@...goat.com>
> ---
>  drivers/irqchip/Kconfig                |  10 +
>  drivers/irqchip/Makefile               |   1 +
>  drivers/irqchip/irq-loongson-pch-msi.c | 265 +++++++++++++++++++++++++
>  3 files changed, 276 insertions(+)
>  create mode 100644 drivers/irqchip/irq-loongson-pch-msi.c
> 
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 4ab7a9b1a5c2..9f2935418f33 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -548,4 +548,14 @@ config LOONGSON_PCH_PIC
>  	help
>  	  Support for the Loongson PCH PIC Controller.
>  
> +config LOONGSON_PCH_MSI
> +	bool "Loongson PCH PIC Controller"
> +	depends on MACH_LOONGSON64 || COMPILE_TEST
> +	depends on PCI
> +	default MACH_LOONGSON64
> +	select IRQ_DOMAIN_HIERARCHY
> +	select PCI_MSI
> +	help
> +	  Support for the Loongson PCH MSI Controller.
> +
>  endmenu
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index acc72331cec8..3a4ce283189a 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -109,3 +109,4 @@ obj-$(CONFIG_LOONGSON_LIOINTC)		+= irq-loongson-liointc.o
>  obj-$(CONFIG_LOONGSON_HTPIC)		+= irq-loongson-htpic.o
>  obj-$(CONFIG_LOONGSON_HTVEC)		+= irq-loongson-htvec.o
>  obj-$(CONFIG_LOONGSON_PCH_PIC)		+= irq-loongson-pch-pic.o
> +obj-$(CONFIG_LOONGSON_PCH_MSI)		+= irq-loongson-pch-msi.o
> diff --git a/drivers/irqchip/irq-loongson-pch-msi.c b/drivers/irqchip/irq-loongson-pch-msi.c
> new file mode 100644
> index 000000000000..4bb00f2ce86a
> --- /dev/null
> +++ b/drivers/irqchip/irq-loongson-pch-msi.c
> @@ -0,0 +1,265 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + *  Copyright (C) 2020, Jiaxun Yang <jiaxun.yang@...goat.com>
> + *  Loongson PCH MSI support
> + */
> +
> +#define pr_fmt(fmt) "pch-msi: " fmt
> +
> +#include <linux/irqchip.h>
> +#include <linux/msi.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_pci.h>
> +#include <linux/pci.h>
> +#include <linux/slab.h>
> +
> +struct pch_msi_data {
> +	spinlock_t msi_map_lock;
> +	phys_addr_t addr;

addr isn't very descriptive. use something like "doorbell", or anything
that shows that this is where the endpoint write to to generate a MSI.

> +	u32 irq_first;		/* The vectoe number that MSIs start */
> +	u32 num_irqs;		/* The number of vector for MSIs */
> +	unsigned long *msi_map;
> +};
> +
> +static void pch_msi_mask_msi_irq(struct irq_data *d)
> +{
> +	pci_msi_mask_irq(d);
> +	irq_chip_mask_parent(d);
> +}
> +
> +static void pch_msi_unmask_msi_irq(struct irq_data *d)
> +{
> +	pci_msi_unmask_irq(d);
> +	irq_chip_unmask_parent(d);
> +}
> +
> +static struct irq_chip pch_msi_irq_chip = {
> +	.name			= "PCH MSI",
> +	.irq_mask		= pch_msi_mask_msi_irq,
> +	.irq_unmask		= pch_msi_unmask_msi_irq,
> +	.irq_set_affinity	= irq_chip_set_affinity_parent,

Same remark as the previous driver.

> +};
> +
> +static int pch_msi_allocate_hwirq(struct pch_msi_data *priv, int num_req)
> +{
> +	int first;
> +
> +	spin_lock(&priv->msi_map_lock);
> +
> +	first = bitmap_find_next_zero_area(priv->msi_map, priv->num_irqs, 0,
> +					   num_req, 0);

This doesn't work for Multi-MSI, where the base of the MSI vectors must
be naturally aligned to the number of vectors. See
bitmap_find_free_region() and co.

> +	if (first >= priv->num_irqs) {
> +		spin_unlock(&priv->msi_map_lock);
> +		return -ENOSPC;
> +	}
> +
> +	bitmap_set(priv->msi_map, first, num_req);
> +
> +	spin_unlock(&priv->msi_map_lock);
> +
> +	return priv->irq_first + first;
> +}
> +
> +static void pch_msi_free_hwirq(struct pch_msi_data *priv,
> +				int hwirq, int num_req)
> +{
> +	int first = hwirq - priv->irq_first;
> +
> +	spin_lock(&priv->msi_map_lock);
> +
> +	bitmap_clear(priv->msi_map, first, num_req);

See bitmap_release_region() in relation to the above.

> +
> +	spin_unlock(&priv->msi_map_lock);
> +}
> +
> +static void pch_msi_compose_msi_msg(struct irq_data *data,
> +					struct msi_msg *msg)
> +{
> +	struct pch_msi_data *priv = irq_data_get_irq_chip_data(data);
> +	phys_addr_t msg_addr = priv->addr;
> +
> +	msg->address_hi = upper_32_bits(msg_addr);
> +	msg->address_lo = lower_32_bits(msg_addr);
> +	msg->data = data->hwirq;
> +}
> +
> +static struct msi_domain_info pch_msi_domain_info = {
> +	.flags		= MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
> +			  MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX,
> +	.chip	= &pch_msi_irq_chip,
> +};
> +
> +static struct irq_chip middle_irq_chip = {
> +	.name			= "PCH MSI Middle",
> +	.irq_mask		= irq_chip_mask_parent,
> +	.irq_unmask		= irq_chip_unmask_parent,
> +	.irq_set_affinity	= irq_chip_set_affinity_parent,

again.

> +	.irq_compose_msi_msg	= pch_msi_compose_msi_msg,
> +};
> +
> +static int pch_msi_parent_domain_alloc(struct irq_domain *domain,
> +					unsigned int virq, int hwirq)
> +{
> +	struct irq_fwspec fwspec;
> +	int ret;
> +
> +	if (!is_of_node(domain->parent->fwnode))
> +		return -EINVAL;

How can that happen?

> +
> +	fwspec.fwnode = domain->parent->fwnode;
> +	fwspec.param_count = 1;
> +	fwspec.param[0] = hwirq;
> +
> +	ret = irq_domain_alloc_irqs_parent(domain, virq, 1, &fwspec);
> +	if (ret)
> +		return ret;
> +
> +	irq_domain_set_info(domain, virq, hwirq,
> +			    &middle_irq_chip, NULL,
> +			    handle_simple_irq, NULL, NULL);

No, this should at least be handle_edge_irq. More importantly, you
should use the flow set by the underlying irqchip, and not provide your
own.

> +	irq_set_probe(virq);

Probe? what does it mean for MSIs? I also don't see how you tell the
underlying irqchip that the MSI is edge triggered.

> +
> +	return 0;
> +}
> +
> +static int pch_msi_middle_domain_alloc(struct irq_domain *domain,
> +					   unsigned int virq,
> +					   unsigned int nr_irqs, void *args)
> +{
> +	struct pch_msi_data *priv = domain->host_data;
> +	int hwirq, err, i;
> +
> +	hwirq = pch_msi_allocate_hwirq(priv, nr_irqs);
> +	if (hwirq < 0)
> +		return hwirq;
> +
> +	for (i = 0; i < nr_irqs; i++) {
> +		err = pch_msi_parent_domain_alloc(domain, virq + i, hwirq + i);
> +		if (err)
> +			goto err_hwirq;
> +
> +		irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
> +					      &middle_irq_chip, priv);
> +	}
> +
> +	return 0;
> +err_hwirq:
> +	while (--i >= 0)
> +		irq_domain_free_irqs_parent(domain, virq, i);
> +
> +	pch_msi_free_hwirq(priv, hwirq, nr_irqs);
> +	return err;
> +}
> +
> +static void pch_msi_middle_domain_free(struct irq_domain *domain,
> +					   unsigned int virq,
> +					   unsigned int nr_irqs)
> +{
> +	struct irq_data *d = irq_domain_get_irq_data(domain, virq);
> +	struct pch_msi_data *priv = irq_data_get_irq_chip_data(d);
> +
> +	irq_domain_free_irqs_parent(domain, virq, nr_irqs);
> +	pch_msi_free_hwirq(priv, d->hwirq, nr_irqs);
> +}
> +
> +static const struct irq_domain_ops pch_msi_middle_domain_ops = {
> +	.alloc	= pch_msi_middle_domain_alloc,
> +	.free	= pch_msi_middle_domain_free,
> +};
> +
> +static int pch_msi_init_domains(struct pch_msi_data *priv,
> +				struct device_node *node,
> +				struct device_node *parent)
> +{
> +	struct irq_domain *middle_domain, *msi_domain, *parent_domain;
> +
> +	parent_domain = irq_find_host(parent);
> +	if (!parent_domain) {
> +		pr_err("Failed to find the parent domain\n");
> +		return -ENXIO;
> +	}
> +
> +	middle_domain = irq_domain_add_tree(NULL,
> +					    &pch_msi_middle_domain_ops,
> +					    priv);

You don't really need a tree, unless your interrupt space is huge and
very sparse. Given that the DT example says 64, I would go with a
linear domain if that number is realistic.

> +	if (!middle_domain) {
> +		pr_err("Failed to create the MSI middle domain\n");
> +		return -ENOMEM;
> +	}
> +
> +	middle_domain->parent = parent_domain;
> +
> +	msi_domain = pci_msi_create_irq_domain(of_node_to_fwnode(node),
> +					       &pch_msi_domain_info,
> +					       middle_domain);
> +	if (!msi_domain) {
> +		pr_err("Failed to create MSI domain\n");
> +		irq_domain_remove(middle_domain);
> +		return -ENOMEM;
> +	}
> +
> +	return 0;
> +}
> +
> +static int pch_msi_init(struct device_node *node,
> +			    struct device_node *parent)
> +{
> +	struct pch_msi_data *priv;
> +	struct resource res;
> +	int ret;
> +
> +	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	spin_lock_init(&priv->msi_map_lock);
> +
> +	ret = of_address_to_resource(node, 0, &res);
> +	if (ret) {
> +		pr_err("Failed to allocate resource\n");
> +		goto err_priv;
> +	}
> +
> +	priv->addr = res.start;
> +
> +	if (of_property_read_u32(node, "loongson,msi-base-vec",
> +				&priv->irq_first)) {
> +		pr_err("Unable to parse MSI vec base\n");
> +		ret = -EINVAL;
> +		goto err_priv;
> +	}
> +
> +	if (of_property_read_u32(node, "loongson,msi-num-vecs",
> +				&priv->num_irqs)) {
> +		pr_err("Unable to parse MSI vec number\n");
> +		ret = -EINVAL;
> +		goto err_priv;
> +	}
> +
> +	priv->msi_map = kcalloc(BITS_TO_LONGS(priv->num_irqs),
> +				sizeof(*priv->msi_map),
> +				GFP_KERNEL);
> +	if (!priv->msi_map) {
> +		ret = -ENOMEM;
> +		goto err_priv;
> +	}
> +
> +	pr_debug("Registering %d MSIs, starting at %d\n",
> +		 priv->num_irqs, priv->irq_first);
> +
> +	ret = pch_msi_init_domains(priv, node, parent);
> +	if (ret)
> +		goto err_map;
> +
> +	return 0;
> +
> +err_map:
> +	kfree(priv->msi_map);
> +err_priv:
> +	kfree(priv);
> +	return ret;
> +}
> +
> +IRQCHIP_DECLARE(pch_msi, "loongson,pch-msi-1.0", pch_msi_init);

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

Powered by blists - more mailing lists