[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1587656017-27911-4-git-send-email-kgunda@codeaurora.org>
Date: Thu, 23 Apr 2020 21:03:36 +0530
From: Kiran Gunda <kgunda@...eaurora.org>
To: bjorn.andersson@...aro.org, jingoohan1@...il.com,
lee.jones@...aro.org, b.zolnierkie@...sung.com,
dri-devel@...ts.freedesktop.org, daniel.thompson@...aro.org,
jacek.anaszewski@...il.com, pavel@....cz, robh+dt@...nel.org,
mark.rutland@....com, robh@...nel.org, linux-leds@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Dan Murphy <dmurphy@...com>
Cc: linux-arm-msm@...r.kernel.org, Kiran Gunda <kgunda@...eaurora.org>,
Subbaraman Narayanamurthy <subbaram@...eaurora.org>
Subject: [PATCH V6 3/4] backlight: qcom-wled: Add WLED5 bindings
Add WLED5 specific bindings.
Signed-off-by: Kiran Gunda <kgunda@...eaurora.org>
Signed-off-by: Subbaraman Narayanamurthy <subbaram@...eaurora.org>
Acked-by: Daniel Thompson <daniel.thompson@...aro.org>
---
.../bindings/leds/backlight/qcom-wled.yaml | 59 ++++++++++++++++++++--
1 file changed, 56 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
index b835443b..01c7d93 100644
--- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -21,6 +21,7 @@ properties:
- qcom,pm8941-wled
- qcom,pmi8998-wled
- qcom,pm660l-wled
+ - qcom,pm8150l-wled
reg:
maxItems: 1
@@ -28,12 +29,13 @@ properties:
default-brightness:
description: |
brightness value on boot.
- minimum: 0
- maximum: 4095
- default: 2048
label: true
+ max-brightness:
+ description: |
+ Maximum brightness level.
+
qcom,cs-out:
description: |
enable current sink output.
@@ -141,6 +143,31 @@ properties:
- const: ovp
- const: short
+ qcom,modulator-sel:
+ description: |
+ Selects the modulator used for brightness modulation.
+ Allowed values are,
+ 0 - Modulator A
+ 1 - Modulator B
+ This property is applicable only to WLED5 peripheral.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1 ]
+ - default: 0
+
+ qcom,cabc-sel:
+ description: |
+ Selects the CABC pin signal used for brightness modulation.
+ Allowed values are,
+ 0 - CABC disabled
+ 1 - CABC 1
+ 2 - CABC 2
+ 3 - External signal (e.g. LPG) is used for dimming
+ This property is applicable only to WLED5 peripheral.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 1, 2, 3 ]
+
allOf:
- if:
properties:
@@ -183,6 +210,32 @@ allOf:
interrupt-names:
minItems: 2
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8150l-wled
+
+ then:
+ properties:
+ default-brightness:
+ minimum: 0
+ maximum: 32767
+
+ max-brightness:
+ minimum: 0
+ maximum: 32767
+
+ else:
+ properties:
+ default-brightness:
+ minimum: 0
+ maximum: 4095
+
+ max-brightness:
+ minimum: 0
+ maximum: 4095
required:
- compatible
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists