linux-kernel - [PATCH v2 75/91] drm/vc4: hdmi: Add PHY init and disable function

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <5ebcf3a94da0eeb23002902822f6fe1eefb43366.1587742492.git-series.maxime@cerno.tech>
Date:   Fri, 24 Apr 2020 17:34:56 +0200
From:   Maxime Ripard <maxime@...no.tech>
To:     Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
        Eric Anholt <eric@...olt.net>
Cc:     dri-devel@...ts.freedesktop.org,
        linux-rpi-kernel@...ts.infradead.org,
        bcm-kernel-feedback-list@...adcom.com,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Dave Stevenson <dave.stevenson@...pberrypi.com>,
        Tim Gover <tim.gover@...pberrypi.com>,
        Phil Elwell <phil@...pberrypi.com>,
        Maxime Ripard <maxime@...no.tech>
Subject: [PATCH v2 75/91] drm/vc4: hdmi: Add PHY init and disable function

The HDMI PHY in the BCM2711 HDMI controller is significantly more
complicated to setup than in the older BCM283x SoCs.

Let's add hooks to enable and disable the PHY.

Signed-off-by: Maxime Ripard <maxime@...no.tech>
---
 drivers/gpu/drm/vc4/Makefile       |  1 +
 drivers/gpu/drm/vc4/vc4_hdmi.c     | 14 +++++++-------
 drivers/gpu/drm/vc4/vc4_hdmi.h     | 13 +++++++++++++
 drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 25 +++++++++++++++++++++++++
 4 files changed, 46 insertions(+), 7 deletions(-)
 create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_phy.c

diff --git a/drivers/gpu/drm/vc4/Makefile b/drivers/gpu/drm/vc4/Makefile
index b303703bc7f3..d0163e18e9ca 100644
--- a/drivers/gpu/drm/vc4/Makefile
+++ b/drivers/gpu/drm/vc4/Makefile
@@ -12,6 +12,7 @@ vc4-y := \
 	vc4_kms.o \
 	vc4_gem.o \
 	vc4_hdmi.o \
+	vc4_hdmi_phy.o \
 	vc4_vec.o \
 	vc4_hvs.o \
 	vc4_irq.o \
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 4bd385f86034..b04b18d9417d 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -323,7 +323,9 @@ static void vc4_hdmi_encoder_disable(struct drm_encoder *encoder)
 
 	HDMI_WRITE(HDMI_RAM_PACKET_CONFIG, 0);
 
-	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+	if (vc4_hdmi->variant->phy_disable)
+		vc4_hdmi->variant->phy_disable(vc4_hdmi);
+
 	HDMI_WRITE(HDMI_VID_CTL,
 		   HDMI_READ(HDMI_VID_CTL) & ~VC4_HD_VID_CTL_ENABLE);
 
@@ -383,12 +385,8 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
 	if (vc4_hdmi->variant->reset)
 		vc4_hdmi->variant->reset(vc4_hdmi);
 
-	/* PHY should be in reset, like
-	 * vc4_hdmi_encoder_disable() does.
-	 */
-	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
-
-	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0);
+	if (vc4_hdmi->variant->phy_init)
+		vc4_hdmi->variant->phy_init(vc4_hdmi, mode);
 
 	if (debug_dump_regs) {
 		struct drm_printer p = drm_info_printer(&vc4_hdmi->pdev->dev);
@@ -1425,6 +1423,8 @@ static const struct vc4_hdmi_variant bcm2835_variant = {
 
 	.init_resources		= vc4_hdmi_init_resources,
 	.reset			= vc4_hdmi_reset,
+	.phy_init		= vc4_hdmi_phy_init,
+	.phy_disable		= vc4_hdmi_phy_disable,
 };
 
 static const struct of_device_id vc4_hdmi_dt_match[] = {
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 93695674c2d3..39ae5273f36b 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -21,6 +21,8 @@ to_vc4_hdmi_encoder(struct drm_encoder *encoder)
 	return container_of(encoder, struct vc4_hdmi_encoder, base.base);
 }
 
+struct drm_display_mode;
+
 struct vc4_hdmi;
 struct vc4_hdmi_register;
 
@@ -38,6 +40,13 @@ struct vc4_hdmi_variant {
 
 	/* Callback to reset the HDMI block */
 	void (*reset)(struct vc4_hdmi *vc4_hdmi);
+
+	/* Callback to initialize the PHY according to the mode */
+	void (*phy_init)(struct vc4_hdmi *vc4_hdmi,
+			 struct drm_display_mode *mode);
+
+	/* Callback to disable the PHY */
+	void (*phy_disable)(struct vc4_hdmi *vc4_hdmi);
 };
 
 /* HDMI audio information */
@@ -95,4 +104,8 @@ encoder_to_vc4_hdmi(struct drm_encoder *encoder)
 	return container_of(_encoder, struct vc4_hdmi, encoder);
 }
 
+void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi,
+		       struct drm_display_mode *mode);
+void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi);
+
 #endif /* _VC4_HDMI_H_ */
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi_phy.c b/drivers/gpu/drm/vc4/vc4_hdmi_phy.c
new file mode 100644
index 000000000000..5a1746877bb5
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_hdmi_phy.c
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015 Broadcom
+ * Copyright (c) 2014 The Linux Foundation. All rights reserved.
+ * Copyright (C) 2013 Red Hat
+ * Author: Rob Clark <robdclark@...il.com>
+ */
+
+#include "vc4_hdmi.h"
+#include "vc4_hdmi_regs.h"
+
+void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi, struct drm_display_mode *mode)
+{
+	/* PHY should be in reset, like
+	 * vc4_hdmi_encoder_disable() does.
+	 */
+
+	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0);
+}
+
+void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi)
+{
+	HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+}
-- 
git-series 0.9.1