[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200424221123.106527-2-lkundrak@v3.sk>
Date: Sat, 25 Apr 2020 00:11:22 +0200
From: Lubomir Rintel <lkundrak@...sk>
To: Lee Jones <lee.jones@...aro.org>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Lubomir Rintel <lkundrak@...sk>
Subject: [PATCH v2 1/2] dt-bindings: mfd: Add ENE KB3930 Embedded Controller binding
Add binding document for the ENE KB3930 Embedded Controller.
Signed-off-by: Lubomir Rintel <lkundrak@...sk>
---
Changes since v1:
- Addressed binding validation failure
.../devicetree/bindings/mfd/ene-kb3930.yaml | 55 +++++++++++++++++++
1 file changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
diff --git a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
new file mode 100644
index 000000000000..005f5cb59ab1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ene-kb3930.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ENE KB3930 Embedded Controller bindings
+
+description: |
+ This binding describes the ENE KB3930 Embedded Controller attached to a
+ I2C bus.
+
+maintainers:
+ - Lubomir Rintel <lkundrak@...sk>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - dell,wyse-ariel-ec # Dell Wyse Ariel board (3020)
+ - const: ene,kb3930
+ reg:
+ maxItems: 1
+
+ off-gpios:
+ description: GPIO used with the shutdown protocol on Ariel
+ maxItems: 2
+
+ system-power-controller: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ embedded-controller@58 {
+ compatible = "dell,wyse-ariel-ec", "ene,kb3930";
+ reg = <0x58>;
+ system-power-controller;
+
+ off-gpios = <&gpio 126 GPIO_ACTIVE_HIGH>,
+ <&gpio 127 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
--
2.26.0
Powered by blists - more mailing lists