[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <97f6f0dfa74264edf5bcb9c12b5424f5b8739021.1587742492.git-series.maxime@cerno.tech>
Date: Fri, 24 Apr 2020 17:34:34 +0200
From: Maxime Ripard <maxime@...no.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
Eric Anholt <eric@...olt.net>
Cc: dri-devel@...ts.freedesktop.org,
linux-rpi-kernel@...ts.infradead.org,
bcm-kernel-feedback-list@...adcom.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Dave Stevenson <dave.stevenson@...pberrypi.com>,
Tim Gover <tim.gover@...pberrypi.com>,
Phil Elwell <phil@...pberrypi.com>,
Maxime Ripard <maxime@...no.tech>
Subject: [PATCH v2 53/91] drm/vc4: crtc: Add FIFO depth to vc4_crtc_data
Not all pixelvalve FIFOs in vc5 have the same depth, so we need to add that
to our vc4_crtc_data structure to be able to compute the fill level
properly later on.
Signed-off-by: Maxime Ripard <maxime@...no.tech>
---
drivers/gpu/drm/vc4/vc4_crtc.c | 19 ++++++++++++++++---
drivers/gpu/drm/vc4/vc4_drv.h | 3 +++
2 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index ea55d4ca2766..e9d71153c6c6 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -251,10 +251,20 @@ vc4_crtc_update_gamma_lut(struct drm_crtc *crtc)
vc4_crtc_lut_load(crtc);
}
-static u32 vc4_get_fifo_full_level(u32 format)
+static u32 vc4_get_fifo_full_level(struct vc4_crtc *vc4_crtc, u32 format)
{
- static const u32 fifo_len_bytes = 64;
+ u32 fifo_len_bytes = vc4_crtc->data->fifo_depth;
+ /*
+ * Pixels are pulled from the HVS if the number of bytes is
+ * lower than the FIFO full level.
+ *
+ * The latency of the pixel fetch mechanism is 6 pixels, so we
+ * need to convert those 6 pixels in bytes, depending on the
+ * format, and then subtract that from the length of the FIFO
+ * to make sure we never end up in a situation where the FIFO
+ * is full.
+ */
switch (format) {
case PV_CONTROL_FORMAT_DSIV_16:
case PV_CONTROL_FORMAT_DSIC_16:
@@ -369,7 +379,7 @@ static void vc4_crtc_config_pv(struct drm_crtc *crtc)
CRTC_WRITE(PV_CONTROL,
VC4_SET_FIELD(format, PV_CONTROL_FORMAT) |
- VC4_SET_FIELD(vc4_get_fifo_full_level(format),
+ VC4_SET_FIELD(vc4_get_fifo_full_level(vc4_crtc, format),
PV_CONTROL_FIFO_LEVEL) |
VC4_SET_FIELD(pixel_rep - 1, PV_CONTROL_PIXEL_REP) |
PV_CONTROL_CLR_AT_START |
@@ -1068,6 +1078,7 @@ static const struct vc4_crtc_data bcm2835_pv0_data = {
.hvs_available_channels = BIT(0),
.hvs_output = 0,
.debugfs_name = "crtc0_regs",
+ .fifo_depth = 64,
.pixels_per_clock = 1,
.encoder_types = {
[PV_CONTROL_CLK_SELECT_DSI] = VC4_ENCODER_TYPE_DSI0,
@@ -1079,6 +1090,7 @@ static const struct vc4_crtc_data bcm2835_pv1_data = {
.hvs_available_channels = BIT(2),
.hvs_output = 2,
.debugfs_name = "crtc1_regs",
+ .fifo_depth = 64,
.pixels_per_clock = 1,
.encoder_types = {
[PV_CONTROL_CLK_SELECT_DSI] = VC4_ENCODER_TYPE_DSI1,
@@ -1090,6 +1102,7 @@ static const struct vc4_crtc_data bcm2835_pv2_data = {
.hvs_available_channels = BIT(1),
.hvs_output = 1,
.debugfs_name = "crtc2_regs",
+ .fifo_depth = 64,
.pixels_per_clock = 1,
.encoder_types = {
[PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI] = VC4_ENCODER_TYPE_HDMI,
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index 6468c6df20b6..1ac27f8ec725 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -450,6 +450,9 @@ to_vc4_encoder(struct drm_encoder *encoder)
}
struct vc4_crtc_data {
+ /* Depth of the PixelValve FIFO in bytes */
+ unsigned int fifo_depth;
+
/* Which channels of the HVS can the output source from */
unsigned int hvs_available_channels;
--
git-series 0.9.1
Powered by blists - more mailing lists