| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1588189552-899-5-git-send-email-opendmb@gmail.com>
Date: Wed, 29 Apr 2020 12:45:49 -0700
From: Doug Berger <opendmb@...il.com>
To: Florian Fainelli <f.fainelli@...il.com>,
"David S. Miller" <davem@...emloft.net>
Cc: bcm-kernel-feedback-list@...adcom.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, Doug Berger <opendmb@...il.com>
Subject: [PATCH net-next 4/7] Revert "net: bcmgenet: remove unused function in bcmgenet.c"
This reverts commit e2072600a24161b7ddcfb26814f69f5fbc8ef85a.
This commit restores the previous implementation of Hardware Filter
Block functions to the file for use in subsequent commits.
Signed-off-by: Doug Berger <opendmb@...il.com>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 122 +++++++++++++++++++++++++
1 file changed, 122 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 57b8608feae1..b37ef05c5083 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2759,6 +2759,128 @@ static void bcmgenet_enable_dma(struct bcmgenet_priv *priv, u32 dma_ctrl)
bcmgenet_tdma_writel(priv, reg, DMA_CTRL);
}
+static bool bcmgenet_hfb_is_filter_enabled(struct bcmgenet_priv *priv,
+ u32 f_index)
+{
+ u32 offset;
+ u32 reg;
+
+ offset = HFB_FLT_ENABLE_V3PLUS + (f_index < 32) * sizeof(u32);
+ reg = bcmgenet_hfb_reg_readl(priv, offset);
+ return !!(reg & (1 << (f_index % 32)));
+}
+
+static void bcmgenet_hfb_enable_filter(struct bcmgenet_priv *priv, u32 f_index)
+{
+ u32 offset;
+ u32 reg;
+
+ offset = HFB_FLT_ENABLE_V3PLUS + (f_index < 32) * sizeof(u32);
+ reg = bcmgenet_hfb_reg_readl(priv, offset);
+ reg |= (1 << (f_index % 32));
+ bcmgenet_hfb_reg_writel(priv, reg, offset);
+}
+
+static void bcmgenet_hfb_set_filter_rx_queue_mapping(struct bcmgenet_priv *priv,
+ u32 f_index, u32 rx_queue)
+{
+ u32 offset;
+ u32 reg;
+
+ offset = f_index / 8;
+ reg = bcmgenet_rdma_readl(priv, DMA_INDEX2RING_0 + offset);
+ reg &= ~(0xF << (4 * (f_index % 8)));
+ reg |= ((rx_queue & 0xF) << (4 * (f_index % 8)));
+ bcmgenet_rdma_writel(priv, reg, DMA_INDEX2RING_0 + offset);
+}
+
+static void bcmgenet_hfb_set_filter_length(struct bcmgenet_priv *priv,
+ u32 f_index, u32 f_length)
+{
+ u32 offset;
+ u32 reg;
+
+ offset = HFB_FLT_LEN_V3PLUS +
+ ((priv->hw_params->hfb_filter_cnt - 1 - f_index) / 4) *
+ sizeof(u32);
+ reg = bcmgenet_hfb_reg_readl(priv, offset);
+ reg &= ~(0xFF << (8 * (f_index % 4)));
+ reg |= ((f_length & 0xFF) << (8 * (f_index % 4)));
+ bcmgenet_hfb_reg_writel(priv, reg, offset);
+}
+
+static int bcmgenet_hfb_find_unused_filter(struct bcmgenet_priv *priv)
+{
+ u32 f_index;
+
+ for (f_index = 0; f_index < priv->hw_params->hfb_filter_cnt; f_index++)
+ if (!bcmgenet_hfb_is_filter_enabled(priv, f_index))
+ return f_index;
+
+ return -ENOMEM;
+}
+
+/* bcmgenet_hfb_add_filter
+ *
+ * Add new filter to Hardware Filter Block to match and direct Rx traffic to
+ * desired Rx queue.
+ *
+ * f_data is an array of unsigned 32-bit integers where each 32-bit integer
+ * provides filter data for 2 bytes (4 nibbles) of Rx frame:
+ *
+ * bits 31:20 - unused
+ * bit 19 - nibble 0 match enable
+ * bit 18 - nibble 1 match enable
+ * bit 17 - nibble 2 match enable
+ * bit 16 - nibble 3 match enable
+ * bits 15:12 - nibble 0 data
+ * bits 11:8 - nibble 1 data
+ * bits 7:4 - nibble 2 data
+ * bits 3:0 - nibble 3 data
+ *
+ * Example:
+ * In order to match:
+ * - Ethernet frame type = 0x0800 (IP)
+ * - IP version field = 4
+ * - IP protocol field = 0x11 (UDP)
+ *
+ * The following filter is needed:
+ * u32 hfb_filter_ipv4_udp[] = {
+ * Rx frame offset 0x00: 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ * Rx frame offset 0x08: 0x00000000, 0x00000000, 0x000F0800, 0x00084000,
+ * Rx frame offset 0x10: 0x00000000, 0x00000000, 0x00000000, 0x00030011,
+ * };
+ *
+ * To add the filter to HFB and direct the traffic to Rx queue 0, call:
+ * bcmgenet_hfb_add_filter(priv, hfb_filter_ipv4_udp,
+ * ARRAY_SIZE(hfb_filter_ipv4_udp), 0);
+ */
+int bcmgenet_hfb_add_filter(struct bcmgenet_priv *priv, u32 *f_data,
+ u32 f_length, u32 rx_queue)
+{
+ int f_index;
+ u32 i;
+
+ f_index = bcmgenet_hfb_find_unused_filter(priv);
+ if (f_index < 0)
+ return -ENOMEM;
+
+ if (f_length > priv->hw_params->hfb_filter_size)
+ return -EINVAL;
+
+ for (i = 0; i < f_length; i++)
+ bcmgenet_hfb_writel(priv, f_data[i],
+ (f_index * priv->hw_params->hfb_filter_size + i) *
+ sizeof(u32));
+
+ bcmgenet_hfb_set_filter_length(priv, f_index, 2 * f_length);
+ bcmgenet_hfb_set_filter_rx_queue_mapping(priv, f_index, rx_queue);
+ bcmgenet_hfb_enable_filter(priv, f_index);
+ bcmgenet_hfb_reg_writel(priv, 0x1, HFB_CTRL);
+
+ return 0;
+}
+
/* bcmgenet_hfb_clear
*
* Clear Hardware Filter Block and disable all filtering.
--
2.7.4
Powered by blists - more mailing lists