| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <2a554708f40ab8fd34905755518eeeda315cf4c9.1588261997.git.mchehab+huawei@kernel.org>
Date: Thu, 30 Apr 2020 18:04:18 +0200
From: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
To: Linux Doc Mailing List <linux-doc@...r.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>,
linux-kernel@...r.kernel.org, Jonathan Corbet <corbet@....net>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Kalle Valo <kvalo@...eaurora.org>, netdev@...r.kernel.org,
linux-wireless@...r.kernel.org
Subject: [PATCH 23/37] docs: networking: convert ray_cs.txt to ReST
- add SPDX header;
- use copyright symbol;
- add a document title;
- mark code blocks and literals as such;
- mark tables as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
---
Documentation/networking/index.rst | 1 +
.../networking/{ray_cs.txt => ray_cs.rst} | 101 ++++++++++--------
drivers/net/wireless/Kconfig | 2 +-
3 files changed, 60 insertions(+), 44 deletions(-)
rename Documentation/networking/{ray_cs.txt => ray_cs.rst} (65%)
diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst
index 85bc52d0b3a6..b7e35b0d905c 100644
--- a/Documentation/networking/index.rst
+++ b/Documentation/networking/index.rst
@@ -96,6 +96,7 @@ Contents:
ppp_generic
proc_net_tcp
radiotap-headers
+ ray_cs
.. only:: subproject and html
diff --git a/Documentation/networking/ray_cs.txt b/Documentation/networking/ray_cs.rst
similarity index 65%
rename from Documentation/networking/ray_cs.txt
rename to Documentation/networking/ray_cs.rst
index c0c12307ed9d..9a46d1ae8f20 100644
--- a/Documentation/networking/ray_cs.txt
+++ b/Documentation/networking/ray_cs.rst
@@ -1,6 +1,14 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+=========================
+Raylink wireless LAN card
+=========================
+
September 21, 1999
-Copyright (c) 1998 Corey Thomas (corey@...ld.std.com)
+Copyright |copy| 1998 Corey Thomas (corey@...ld.std.com)
This file is the documentation for the Raylink Wireless LAN card driver for
Linux. The Raylink wireless LAN card is a PCMCIA card which provides IEEE
@@ -13,7 +21,7 @@ wireless LAN cards.
As of kernel 2.3.18, the ray_cs driver is part of the Linux kernel
source. My web page for the development of ray_cs is at
-http://web.ralinktech.com/ralink/Home/Support/Linux.html
+http://web.ralinktech.com/ralink/Home/Support/Linux.html
and I can be emailed at corey@...ld.std.com
The kernel driver is based on ray_cs-1.62.tgz
@@ -29,6 +37,7 @@ with nondefault parameters, they can be edited in
will find them all.
Information on card services is available at:
+
http://pcmcia-cs.sourceforge.net/
@@ -39,72 +48,78 @@ the driver.
Currently, ray_cs is not part of David Hinds card services package,
so the following magic is required.
-At the end of the /etc/pcmcia/config.opts file, add the line:
-source ./ray_cs.opts
+At the end of the /etc/pcmcia/config.opts file, add the line:
+source ./ray_cs.opts
This will make card services read the ray_cs.opts file
when starting. Create the file /etc/pcmcia/ray_cs.opts containing the
-following:
+following::
-#### start of /etc/pcmcia/ray_cs.opts ###################
-# Configuration options for Raylink Wireless LAN PCMCIA card
-device "ray_cs"
- class "network" module "misc/ray_cs"
+ #### start of /etc/pcmcia/ray_cs.opts ###################
+ # Configuration options for Raylink Wireless LAN PCMCIA card
+ device "ray_cs"
+ class "network" module "misc/ray_cs"
-card "RayLink PC Card WLAN Adapter"
- manfid 0x01a6, 0x0000
- bind "ray_cs"
+ card "RayLink PC Card WLAN Adapter"
+ manfid 0x01a6, 0x0000
+ bind "ray_cs"
-module "misc/ray_cs" opts ""
-#### end of /etc/pcmcia/ray_cs.opts #####################
+ module "misc/ray_cs" opts ""
+ #### end of /etc/pcmcia/ray_cs.opts #####################
To join an existing network with
-different parameters, contact the network administrator for the
+different parameters, contact the network administrator for the
configuration information, and edit /etc/pcmcia/ray_cs.opts.
Add the parameters below between the empty quotes.
Parameters for ray_cs driver which may be specified in ray_cs.opts:
-bc integer 0 = normal mode (802.11 timing)
- 1 = slow down inter frame timing to allow
- operation with older breezecom access
- points.
+=============== =============== =============================================
+bc integer 0 = normal mode (802.11 timing),
+ 1 = slow down inter frame timing to allow
+ operation with older breezecom access
+ points.
-beacon_period integer beacon period in Kilo-microseconds
- legal values = must be integer multiple
- of hop dwell
- default = 256
+beacon_period integer beacon period in Kilo-microseconds,
-country integer 1 = USA (default)
- 2 = Europe
- 3 = Japan
- 4 = Korea
- 5 = Spain
- 6 = France
- 7 = Israel
- 8 = Australia
+ legal values = must be integer multiple
+ of hop dwell
+
+ default = 256
+
+country integer 1 = USA (default),
+ 2 = Europe,
+ 3 = Japan,
+ 4 = Korea,
+ 5 = Spain,
+ 6 = France,
+ 7 = Israel,
+ 8 = Australia
essid string ESS ID - network name to join
+
string with maximum length of 32 chars
default value = "ADHOC_ESSID"
-hop_dwell integer hop dwell time in Kilo-microseconds
+hop_dwell integer hop dwell time in Kilo-microseconds
+
legal values = 16,32,64,128(default),256
irq_mask integer linux standard 16 bit value 1bit/IRQ
+
lsb is IRQ 0, bit 1 is IRQ 1 etc.
Used to restrict choice of IRQ's to use.
- Recommended method for controlling
- interrupts is in /etc/pcmcia/config.opts
+ Recommended method for controlling
+ interrupts is in /etc/pcmcia/config.opts
-net_type integer 0 (default) = adhoc network,
+net_type integer 0 (default) = adhoc network,
1 = infrastructure
phy_addr string string containing new MAC address in
hex, must start with x eg
x00008f123456
-psm integer 0 = continuously active
+psm integer 0 = continuously active,
1 = power save mode (not useful yet)
pc_debug integer (0-5) larger values for more verbose
@@ -114,14 +129,14 @@ ray_debug integer Replaced with pc_debug
ray_mem_speed integer defaults to 500
-sniffer integer 0 = not sniffer (default)
- 1 = sniffer which can be used to record all
- network traffic using tcpdump or similar,
- but no normal network use is allowed.
+sniffer integer 0 = not sniffer (default),
+ 1 = sniffer which can be used to record all
+ network traffic using tcpdump or similar,
+ but no normal network use is allowed.
-translate integer 0 = no translation (encapsulate frames)
+translate integer 0 = no translation (encapsulate frames),
1 = translation (RFC1042/802.1)
-
+=============== =============== =============================================
More on sniffer mode:
@@ -136,7 +151,7 @@ package which parses the 802.11 headers.
Known Problems and missing features
- Does not work with non x86
+ Does not work with non x86
Does not work with SMP
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 1c98d781ae49..15b0ad171f4c 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -57,7 +57,7 @@ config PCMCIA_RAYCS
---help---
Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
(PC-card) wireless Ethernet networking card to your computer.
- Please read the file <file:Documentation/networking/ray_cs.txt> for
+ Please read the file <file:Documentation/networking/ray_cs.rst> for
details.
To compile this driver as a module, choose M here: the module will be
--
2.25.4
Powered by blists - more mailing lists