lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200430220619.3169-10-ansuelsmth@gmail.com>
Date:   Fri,  1 May 2020 00:06:16 +0200
From:   Ansuel Smith <ansuelsmth@...il.com>
To:     Bjorn Andersson <bjorn.andersson@...aro.org>
Cc:     Sham Muthayyan <smuthayy@...eaurora.org>,
        Ansuel Smith <ansuelsmth@...il.com>,
        Andy Gross <agross@...nel.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Stanimir Varbanov <svarbanov@...sol.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Andrew Murray <amurray@...goodpenguin.co.uk>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 09/11] PCI: qcom: add ipq8064 rev2 variant and set tx term offset

From: Sham Muthayyan <smuthayy@...eaurora.org>

Add tx term offset support to pcie qcom driver need in some revision of
the ipq806x SoC.
Ipq8064 have tx term offset set to 7.
Ipq8064-v2 revision and ipq8065 have the tx term offset set to 0.

Signed-off-by: Sham Muthayyan <smuthayy@...eaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@...il.com>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index da8058fd1925..372d2c8508b5 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -45,6 +45,9 @@
 #define PCIE_CAP_CPL_TIMEOUT_DISABLE		0x10
 
 #define PCIE20_PARF_PHY_CTRL			0x40
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK	GENMASK(12, 16)
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x)		((x) << 16)
+
 #define PCIE20_PARF_PHY_REFCLK			0x4C
 #define PHY_REFCLK_SSP_EN			BIT(16)
 #define PHY_REFCLK_USE_PAD			BIT(12)
@@ -118,6 +121,7 @@ struct qcom_pcie_resources_2_1_0 {
 	u32 tx_swing_full;
 	u32 tx_swing_low;
 	u32 rx0_eq;
+	u8 phy_tx0_term_offset;
 };
 
 struct qcom_pcie_resources_1_0_0 {
@@ -318,6 +322,11 @@ static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
 	if (IS_ERR(res->ext_reset))
 		return PTR_ERR(res->ext_reset);
 
+	if (of_device_is_compatible(dev->of_node, "qcom,pcie-ipq8064"))
+		res->phy_tx0_term_offset = 7;
+	else
+		res->phy_tx0_term_offset = 0;
+
 	res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
 	return PTR_ERR_OR_ZERO(res->phy_reset);
 }
@@ -402,6 +411,11 @@ static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 	/* enable PCIe clocks and resets */
 	qcom_clear_and_set_dword(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
 
+	/* set TX termination offset */
+	qcom_clear_and_set_dword(pcie->parf + PCIE20_PARF_PHY_CTRL,
+			PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK,
+			PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset));
+
 	writel(PCS_DEEMPH_TX_DEEMPH_GEN1(res->tx_deemph_gen1) |
 	       PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(res->tx_deemph_gen2_3p5db) |
 	       PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(res->tx_deemph_gen2_6db),
@@ -1485,6 +1499,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 static const struct of_device_id qcom_pcie_match[] = {
 	{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
 	{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
+	{ .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 },
 	{ .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 },
 	{ .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 },
 	{ .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 },
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ