| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200430060132.GB6645@xin-VirtualBox>
Date: Thu, 30 Apr 2020 14:01:32 +0800
From: Xin Ji <xji@...logixsemi.com>
To: Sam Ravnborg <sam@...nborg.org>
Cc: devel@...verdev.osuosl.org,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Dan Carpenter <dan.carpenter@...cle.com>,
Andrzej Hajda <a.hajda@...sung.com>,
Neil Armstrong <narmstrong@...libre.com>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...l.net>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org,
Pi-Hsun Shih <pihsun@...omium.org>,
Sheng Pan <span@...logixsemi.com>
Subject: Re: [PATCH v8 1/2] dt-bindings: drm/bridge: anx7625: MIPI to DP
transmitter binding
Hi Sam, thanks for your comments.
On Mon, Apr 27, 2020 at 08:49:09PM +0200, Sam Ravnborg wrote:
> Hi Xin Ji
>
> On Mon, Apr 27, 2020 at 02:17:46PM +0800, Xin Ji wrote:
> > The ANX7625 is an ultra-low power 4K Mobile HD Transmitter designed
> > for portable device. It converts MIPI to DisplayPort 1.3 4K.
>
> Thanks for providing this binding.
> When you re-submit please also send to devicetree@...r.kernel.org.
OK
>
> Running the binding through dt_binding_check gives me:
>
> /home/sam/drm/linux.git/Documentation/devicetree/bindings/display/bridge/anx7625.yaml: ignoring, error in schema:
> warning: no schema found in file: /home/sam/drm/linux.git/Documentation/devicetree/bindings/display/bridge/anx7625.yaml
> make[2]: *** [/home/sam/drm/linux.git/Documentation/devicetree/bindings/Makefile:42: Documentation/devicetree/bindings/processed-schema.yaml] Error 255
> make[2]: *** Waiting for unfinished jobs....
> /home/sam/drm/linux.git/Documentation/devicetree/bindings/display/bridge/anx7625.yaml: Additional properties are not allowed ('example' was unexpected)
> /home/sam/drm/linux.git/Documentation/devicetree/bindings/display/bridge/anx7625.yaml: Additional properties are not allowed ('example' was unexpected)
>
> See writing-schemas.rst for instruction installing tools etc.
OK
>
> >
> > You can add support to your board with binding.
> >
> > Example:
> > anx7625_bridge: encoder@58 {
> > compatible = "analogix,anx7625";
> > reg = <0x58>;
> > status = "okay";
> > panel-flags = <1>;
> > enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
> > reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> >
> > port@0 {
> > reg = <0>;
> > anx_1_in: endpoint {
> > remote-endpoint = <&mipi_dsi>;
> > };
> > };
> >
> > port@2 {
> > reg = <2>;
> > anx_1_out: endpoint {
> > remote-endpoint = <&panel_in>;
> > };
> > };
> > };
> >
> > Signed-off-by: Xin Ji <xji@...logixsemi.com>
> > ---
> > .../bindings/display/bridge/anx7625.yaml | 91 ++++++++++++++++++++++
> > 1 file changed, 91 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/display/bridge/anx7625.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/anx7625.yaml
> > new file mode 100644
> > index 0000000..1149ebb
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/anx7625.yaml
>
> Name the file "analogix,anx7625.yaml".
> (We should rename anx6345.yaml, so others do not omit the company name)
OK
>
> > @@ -0,0 +1,91 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +# Copyright 2019 Analogix Semiconductor, Inc.
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/display/bridge/anx7625.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter)
> > +
> > +maintainers:
> > + - Xin Ji <xji@...logixsemi.com>
> > +
> > +description: |
> > + The ANX7625 is an ultra-low power 4K Mobile HD Transmitter
> > + designed for portable devices.
> > +
> > +properties:
> > + "#address-cells": true
> > + "#size-cells": true
> > +
> > + compatible:
> > + items:
> > + - const: analogix,anx7625
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + panel-flags:
> > + description: indicate the panel is internal or external.
> > + maxItems: 1
> This property hint at something needs to be modelled in a different way.
> I do not recall other bindings need similar info.
I'll change it to vendor,int-property
>
> > +
> > + interrupts:
> > + maxItems: 1
> A description would be nice.
OK
>
> > +
> > + enable-gpios:
> > + description: used for power on chip control, POWER_EN pin D2.
> > + maxItems: 1
> > +
> > + reset-gpios:
> > + description: used for reset chip control, RESET_N pin B7.
> > + maxItems: 1
> > +
> > + port@0:
> > + type: object
> > + description:
> > + A port node pointing to MIPI DSI host port node.
> > +
> > + port@1:
> > + type: object
> > + description:
> > + A port node pointing to MIPI DPI host port node.
> Maybe explain how it differs from port@0 and why it is optional.
It seems this port is not need any more, I'll remove this port.
>
> > +
> > + port@2:
> > + type: object
> > + description:
> > + A port node pointing to panel port node.
> Unless there is a good reason not to then please use a ports node, like
> you see in almost (all?) other bridge bindings.
I'll use ports node.
>
> > +
> > +required:
> > + - "#address-cells"
> > + - "#size-cells"
> > + - compatible
> > + - reg
> > + - port@0
> > + - port@2
>
> additionalProperties: false??
OK
>
>
> > +
> > +example:
> It must be named "examples:" - this is what dt_binding_check complains
> about.
OK
>
> > + - |
> > + anx7625_bridge: encoder@58 {
> > + compatible = "analogix,anx7625";
> > + reg = <0x58>;
> > + status = "okay";
> No status in examples.
OK
>
> > + panel-flags = <1>;
> > + enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
> You need to include a header file to pull in GPIO_ACTIVE_HIGH - see what
> other bindings do.
> > + reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> Be consistent with indent. My personal preference is 4 spaces.
OK
>
> > + anx_1_in: endpoint {
> > + remote-endpoint = <&mipi_dsi>;
> > + };
> > + };
> > +
> > + port@2 {
> > + reg = <2>;
> > + anx_1_out: endpoint {
> > + remote-endpoint = <&panel_in>;
> > + };
> > + };
> > + };
>
> Lot's of small comments. But if this is your first binding then this is
> expected.
> Looks forward for v2.
>
> Sam
Powered by blists - more mailing lists