[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200430115702.5768-6-plaes@plaes.org>
Date: Thu, 30 Apr 2020 14:57:01 +0300
From: Priit Laes <plaes@...es.org>
To: Maxime Ripard <mripard@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
Rob Herring <robh+dt@...nel.org>, linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org, linux-sunxi@...glegroups.com
Cc: Priit Laes <plaes@...es.org>
Subject: [PATCH v3 5/6] ARM: dts: sun7i: Use syscon-based implementation for gmac
Use syscon-based approach to access gmac clock configuration
register, instead of relying on a custom clock driver.
As a bonus, we can now drop the custom clock implementation
and dummy clocks making sun7i fully CCU-compatible.
Signed-off-by: Priit Laes <plaes@...es.org>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 36 +++-----------------------------
1 file changed, 3 insertions(+), 33 deletions(-)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index ffe1d10a1a84..750962a94fad 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -219,37 +219,6 @@ osc32k: clk-32k {
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
-
- /*
- * The following two are dummy clocks, placeholders
- * used in the gmac_tx clock. The gmac driver will
- * choose one parent depending on the PHY interface
- * mode, using clk_set_rate auto-reparenting.
- *
- * The actual TX clock rate is not controlled by the
- * gmac_tx clock.
- */
- mii_phy_tx_clk: clk-mii-phy-tx {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <25000000>;
- clock-output-names = "mii_phy_tx";
- };
-
- gmac_int_tx_clk: clk-gmac-int-tx {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "gmac_int_tx";
- };
-
- gmac_tx_clk: clk@...0164 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-gmac-clk";
- reg = <0x01c20164 0x4>;
- clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
- clock-output-names = "gmac_tx";
- };
};
@@ -1511,11 +1480,12 @@ mali: gpu@...0000 {
gmac: ethernet@...0000 {
compatible = "allwinner,sun7i-a20-gmac";
+ syscon = <&ccu>;
reg = <0x01c50000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
- clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>;
- clock-names = "stmmaceth", "allwinner_gmac_tx";
+ clocks = <&ccu CLK_AHB_GMAC>;
+ clock-names = "stmmaceth";
snps,pbl = <2>;
snps,fixed-burst;
snps,force_sf_dma_mode;
--
2.26.2
Powered by blists - more mailing lists