linux-kernel - Re: BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 in nilfs_segctor_do

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 30 Apr 2020 21:38:42 +0900 (JST)
From:   Hideki EIRAKU <hdk1983@...il.com>
To:     linux-nilfs@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org
Subject: Re: BUG: unable to handle kernel NULL pointer dereference at
 00000000000000a8 in nilfs_segctor_do_co

> In Msg <874kuapb2s.fsf@...and.com>;
>    Subject "Re: BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 in nilfs_segctor_do_construct":
> 
>> Tomas Hlavaty <tom@...and.com> writes:
>>>>> 2) Can you mount the corrupted(?) partition from a recent version of
>>>>> kernel ?
>> 
>> I tried the following Linux kernel versions:
>> 
>> - v4.19
>> - v5.4
>> - v5.5.11
>> 
>> and still get the crash

I found conditions to reproduce this issue with Linux 5.7-rc3:

- CONFIG_MEMCG=y *and* CONFIG_BLK_CGROUP=y

- When the NILFS2 file system writes to a device, the device file has
  never written by other programs since boot

The following is an example with CONFIG_MEMCG=y and
CONFIG_BLK_CGROUP=y kernel.  If you do mkfs and mount it, it works
because the mkfs command has written data to the device file before
mounting:

# mkfs -t nilfs2 /dev/sda1
mkfs.nilfs2 (nilfs-utils 2.2.7)
Start writing file system initial data to the device
       Blocksize:4096  Device:/dev/sda1  Device Size:267386880
File system initialization succeeded !! 
# mount /dev/sda1 /mnt
# touch /mnt
# sync
# 

Loopback mount seems to be the same - if you do losetup, mkfs and
mount on a loopback device, it works:

# losetup /dev/loop0 foo
# mkfs -t nilfs2 /dev/loop0
mkfs.nilfs2 (nilfs-utils 2.2.7)
Start writing file system initial data to the device
       Blocksize:4096  Device:/dev/loop0  Device Size:267386880
File system initialization succeeded !! 
# mount /dev/sda1 /mnt
# touch /mnt
# sync
# 

But if you do mkfs on a file and use mount -o loop, it may fail,
depending on whether the loopback device assigned by the mount command
was used or not before mounting:

# /sbin/mkfs.nilfs2 ./foo
mkfs.nilfs2 (nilfs-utils 2.2.7)
Start writing file system initial data to the device
       Blocksize:4096  Device:./foo  Device Size:268435456
File system initialization succeeded !! 
# mount -o loop ./foo /mnt
[   36.371331] NILFS (loop0): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds
# touch /mnt
# sync
[   40.252869] BUG: kernel NULL pointer dereference, address: 00000000000000a8
(snip)

After reboot, it fails:

# mount /dev/sda1 /mnt
[   14.021188] NILFS (sda1): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds
# touch /mnt
# sync
[   20.576309] BUG: kernel NULL pointer dereference, address: 00000000000000a8
(snip)

But if you do dummy write to the device file before mounting, it
works:

# dd if=/dev/sda1 of=/dev/sda1 count=1
1+0 records in
1+0 records out
512 bytes copied, 0.0135982 s, 37.7 kB/s
# mount /dev/sda1 /mnt
[   52.604560] NILFS (sda1): mounting unchecked fs
[   52.613335] NILFS (sda1): recovery complete
[   52.613877] NILFS (sda1): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds
# touch /mnt
# sync
# 

# losetup /dev/loop0 foo
# dd if=/dev/loop0 of=/dev/loop0 count=1
1+0 records in
1+0 records out
512 bytes copied, 0.0243797 s, 21.0 kB/s
# mount /dev/loop0 /mnt
[  271.915595] NILFS (loop0): mounting unchecked fs
[  272.049603] NILFS (loop0): recovery complete
[  272.049724] NILFS (loop0): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds
# touch /mnt
# sync
# 

I think the dummy write is a simple workaround for now, unless
mounting NILFS2 at boot time.  But I have been using NILFS2 /home for
years, I would like to know better workarounds.