linux-kernel - [PATCH v2 0/2] Raspberry Pi 4 VL805 firmware load

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200430130433.11248-1-nsaenzjulienne@suse.de>
Date:   Thu, 30 Apr 2020 15:04:31 +0200
From:   Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
To:     mbrugger@...e.com, u-boot@...ts.denx.de, bmeng.cn@...il.com,
        marex@...x.de, linux-kernel@...r.kernel.org
Cc:     sjg@...omium.org, m.szyprowski@...sung.com, s.nawrocki@...sung.com,
        Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
Subject: [PATCH v2 0/2] Raspberry Pi 4 VL805 firmware load

Newer revisions of the RPi4 need their xHCI chip, VL805, firmware to be
loaded explicitly. Earlier versions didn't need that as they where using
an EEPROM for that purpose. This series takes care of setting up the
relevant infrastructure and run the firmware loading routine at the
right moment.

Note that this builds on top of Sylwester Nawrocki's "USB host support
for Raspberry Pi 4 board" series.

---

Changes since v1:
 - Rename function
 - Use callback in xhci-pci.c

Nicolas Saenz Julienne (2):
  arm: rpi: Add function to trigger VL805's firmware load
  usb: xhci: Load Raspberry Pi 4 VL805's firmware

 arch/arm/mach-bcm283x/include/mach/mbox.h | 13 +++++++
 arch/arm/mach-bcm283x/include/mach/msg.h  |  7 ++++
 arch/arm/mach-bcm283x/msg.c               | 43 +++++++++++++++++++++++
 board/raspberrypi/rpi/rpi.c               | 12 +++++++
 drivers/usb/host/xhci-pci.c               |  6 ++++
 include/usb/xhci.h                        |  3 ++
 6 files changed, 84 insertions(+)

-- 
2.26.2