lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Fri,  1 May 2020 13:03:20 -0600
From:   Jordan Crouse <jcrouse@...eaurora.org>
To:     linux-arm-msm@...r.kernel.org
Cc:     Eric Anholt <eric@...olt.net>, stable@...r.kernel.org,
        Akhil P Oommen <akhilpo@...eaurora.org>,
        AngeloGioacchino Del Regno <kholk11@...il.com>,
        Ben Dooks <ben.dooks@...ethink.co.uk>,
        Daniel Vetter <daniel@...ll.ch>,
        David Airlie <airlied@...ux.ie>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jeffrey Hugo <jeffrey.l.hugo@...il.com>,
        "Michael J. Ruhl" <michael.j.ruhl@...el.com>,
        Rob Clark <robdclark@...il.com>, Sean Paul <sean@...rly.run>,
        Sharat Masetty <smasetty@...eaurora.org>,
        Thomas Gleixner <tglx@...utronix.de>,
        dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH v2] drm/msm: Check for powered down HW in the devfreq callbacks

Writing to the devfreq sysfs nodes while the GPU is powered down can
result in a system crash (on a5xx) or a nasty GMU error (on a6xx):

 $ /sys/class/devfreq/5000000.gpu# echo 500000000 > min_freq
  [  104.841625] platform 506a000.gmu: [drm:a6xx_gmu_set_oob]
	*ERROR* Timeout waiting for GMU OOB set GPU_DCVS: 0x0

Despite the fact that we carefully try to suspend the devfreq device when
the hardware is powered down there are lots of holes in the governors that
don't check for the suspend state and blindly call into the devfreq
callbacks that end up triggering hardware reads in the GPU driver.

Call pm_runtime_get_if_in_use() in the gpu_busy() and gpu_set_freq()
callbacks to skip the hardware access if it isn't active.

v2: Use pm_runtime_get_if_in_use() per Eric Anholt

Cc: stable@...r.kernel.org
Signed-off-by: Jordan Crouse <jcrouse@...eaurora.org>
---

 drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 6 ++++++
 drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 8 ++++++++
 drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 7 +++++++
 3 files changed, 21 insertions(+)

diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
index 724024a2243a..4d7f269edfcc 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -1404,6 +1404,10 @@ static unsigned long a5xx_gpu_busy(struct msm_gpu *gpu)
 {
 	u64 busy_cycles, busy_time;
 
+	/* Only read the gpu busy if the hardware is already active */
+	if (pm_runtime_get_if_in_use(&gpu->pdev->dev) <= 0)
+		return 0;
+
 	busy_cycles = gpu_read64(gpu, REG_A5XX_RBBM_PERFCTR_RBBM_0_LO,
 			REG_A5XX_RBBM_PERFCTR_RBBM_0_HI);
 
@@ -1412,6 +1416,8 @@ static unsigned long a5xx_gpu_busy(struct msm_gpu *gpu)
 
 	gpu->devfreq.busy_cycles = busy_cycles;
 
+	pm_runtime_put(&gpu->pdev->dev);
+
 	if (WARN_ON(busy_time > ~0LU))
 		return ~0LU;
 
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
index c4e71abbdd53..8ace989b11db 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
@@ -108,6 +108,13 @@ static void __a6xx_gmu_set_freq(struct a6xx_gmu *gmu, int index)
 	struct msm_gpu *gpu = &adreno_gpu->base;
 	int ret;
 
+	/*
+	 * This can get called from devfreq while the hardware is idle. Don't
+	 * bring up the power if it isn't already active
+	 */
+	if (pm_runtime_get_if_in_use(gmu->dev) <= 0)
+		return;
+
 	gmu_write(gmu, REG_A6XX_GMU_DCVS_ACK_OPTION, 0);
 
 	gmu_write(gmu, REG_A6XX_GMU_DCVS_PERF_SETTING,
@@ -134,6 +141,7 @@ static void __a6xx_gmu_set_freq(struct a6xx_gmu *gmu, int index)
 	 * for now leave it at max so that the performance is nominal.
 	 */
 	icc_set_bw(gpu->icc_path, 0, MBps_to_icc(7216));
+	pm_runtime_put(gmu->dev);
 }
 
 void a6xx_gmu_set_freq(struct msm_gpu *gpu, unsigned long freq)
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
index 68af24150de5..bf43eb2fb078 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -810,6 +810,11 @@ static unsigned long a6xx_gpu_busy(struct msm_gpu *gpu)
 	struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
 	u64 busy_cycles, busy_time;
 
+
+	/* Only read the gpu busy if the hardware is already active */
+	if (pm_runtime_get_if_in_use(a6xx_gpu->gmu.dev) <= 0)
+		return 0;
+
 	busy_cycles = gmu_read64(&a6xx_gpu->gmu,
 			REG_A6XX_GMU_CX_GMU_POWER_COUNTER_XOCLK_0_L,
 			REG_A6XX_GMU_CX_GMU_POWER_COUNTER_XOCLK_0_H);
@@ -819,6 +824,8 @@ static unsigned long a6xx_gpu_busy(struct msm_gpu *gpu)
 
 	gpu->devfreq.busy_cycles = busy_cycles;
 
+	pm_runtime_put(a6xx_gpu->gmu.dev);
+
 	if (WARN_ON(busy_time > ~0LU))
 		return ~0LU;
 
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ