[<prev] [next>] [day] [month] [year] [list]
Message-Id: <20200501194326.14593-1-jcrouse@codeaurora.org>
Date: Fri, 1 May 2020 13:43:26 -0600
From: Jordan Crouse <jcrouse@...eaurora.org>
To: linux-arm-msm@...r.kernel.org
Cc: Eric Anholt <eric@...olt.net>, stable@...r.kernel.org,
Akhil P Oommen <akhilpo@...eaurora.org>,
AngeloGioacchino Del Regno <kholk11@...il.com>,
Ben Dooks <ben.dooks@...ethink.co.uk>,
Daniel Vetter <daniel@...ll.ch>,
David Airlie <airlied@...ux.ie>,
Jeffrey Hugo <jeffrey.l.hugo@...il.com>,
Rob Clark <robdclark@...il.com>, Sean Paul <sean@...rly.run>,
Sharat Masetty <smasetty@...eaurora.org>,
Stephen Boyd <swboyd@...omium.org>,
Thomas Gleixner <tglx@...utronix.de>,
dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v3] drm/msm: Check for powered down HW in the devfreq callbacks
Writing to the devfreq sysfs nodes while the GPU is powered down can
result in a system crash (on a5xx) or a nasty GMU error (on a6xx):
$ /sys/class/devfreq/5000000.gpu# echo 500000000 > min_freq
[ 104.841625] platform 506a000.gmu: [drm:a6xx_gmu_set_oob]
*ERROR* Timeout waiting for GMU OOB set GPU_DCVS: 0x0
Despite the fact that we carefully try to suspend the devfreq device when
the hardware is powered down there are lots of holes in the governors that
don't check for the suspend state and blindly call into the devfreq
callbacks that end up triggering hardware reads in the GPU driver.
Call pm_runtime_get_if_in_use() in the gpu_busy() and gpu_set_freq()
callbacks to skip the hardware access if it isn't active.
v3: Only check pm_runtime_get_if_in_use() for == 0 per Eric Anholt
v2: Use pm_runtime_get_if_in_use() per Eric Anholt
Cc: stable@...r.kernel.org
Reviewed-by: Eric Anholt <eric@...olt.net>
Signed-off-by: Jordan Crouse <jcrouse@...eaurora.org>
---
drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 6 ++++++
drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 8 ++++++++
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 7 +++++++
3 files changed, 21 insertions(+)
diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
index 724024a2243a..662d02289533 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -1404,6 +1404,10 @@ static unsigned long a5xx_gpu_busy(struct msm_gpu *gpu)
{
u64 busy_cycles, busy_time;
+ /* Only read the gpu busy if the hardware is already active */
+ if (pm_runtime_get_if_in_use(&gpu->pdev->dev) == 0)
+ return 0;
+
busy_cycles = gpu_read64(gpu, REG_A5XX_RBBM_PERFCTR_RBBM_0_LO,
REG_A5XX_RBBM_PERFCTR_RBBM_0_HI);
@@ -1412,6 +1416,8 @@ static unsigned long a5xx_gpu_busy(struct msm_gpu *gpu)
gpu->devfreq.busy_cycles = busy_cycles;
+ pm_runtime_put(&gpu->pdev->dev);
+
if (WARN_ON(busy_time > ~0LU))
return ~0LU;
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
index c4e71abbdd53..34607a98cc7c 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
@@ -108,6 +108,13 @@ static void __a6xx_gmu_set_freq(struct a6xx_gmu *gmu, int index)
struct msm_gpu *gpu = &adreno_gpu->base;
int ret;
+ /*
+ * This can get called from devfreq while the hardware is idle. Don't
+ * bring up the power if it isn't already active
+ */
+ if (pm_runtime_get_if_in_use(gmu->dev) == 0)
+ return;
+
gmu_write(gmu, REG_A6XX_GMU_DCVS_ACK_OPTION, 0);
gmu_write(gmu, REG_A6XX_GMU_DCVS_PERF_SETTING,
@@ -134,6 +141,7 @@ static void __a6xx_gmu_set_freq(struct a6xx_gmu *gmu, int index)
* for now leave it at max so that the performance is nominal.
*/
icc_set_bw(gpu->icc_path, 0, MBps_to_icc(7216));
+ pm_runtime_put(gmu->dev);
}
void a6xx_gmu_set_freq(struct msm_gpu *gpu, unsigned long freq)
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
index 68af24150de5..2c09d2c21773 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -810,6 +810,11 @@ static unsigned long a6xx_gpu_busy(struct msm_gpu *gpu)
struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
u64 busy_cycles, busy_time;
+
+ /* Only read the gpu busy if the hardware is already active */
+ if (pm_runtime_get_if_in_use(a6xx_gpu->gmu.dev) == 0)
+ return 0;
+
busy_cycles = gmu_read64(&a6xx_gpu->gmu,
REG_A6XX_GMU_CX_GMU_POWER_COUNTER_XOCLK_0_L,
REG_A6XX_GMU_CX_GMU_POWER_COUNTER_XOCLK_0_H);
@@ -819,6 +824,8 @@ static unsigned long a6xx_gpu_busy(struct msm_gpu *gpu)
gpu->devfreq.busy_cycles = busy_cycles;
+ pm_runtime_put(a6xx_gpu->gmu.dev);
+
if (WARN_ON(busy_time > ~0LU))
return ~0LU;
--
2.17.1
Powered by blists - more mailing lists