linux-kernel - [PATCH v2 00/18] S5PV210 and Aries DTS improvements

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <BN6PR04MB066033FD7FF6E5C37747C7A2A3AB0@BN6PR04MB0660.namprd04.prod.outlook.com>
Date:   Fri,  1 May 2020 16:50:01 -0700
From:   Jonathan Bakker <xc-racer2@...e.ca>
To:     kgene@...nel.org, krzk@...nel.org, robh+dt@...nel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-samsung-soc@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     Jonathan Bakker <xc-racer2@...e.ca>
Subject: [PATCH v2 00/18] S5PV210 and Aries DTS improvements

This patchset makes several improvements to Aries devices which are
based on S5PV210.  Several pulls on GPIOs were incorrect/not specified,
sleep GPIO configurations have been added, and more devices have been
added.

Touching the common S5PV210 DTSI are the addition of the ADC node
as well as fixes to the FIMC definitions and a sleep GPIO helper
added.  The GPI gpio node name has been corrected.

The patches have been tested on both a GT-i9000 as well as an
SGH-T959P and both can now suspend/resume properly.

Changes from v1:
- Correct ADC node name to match reg
- Restore removed regulator suspend state
- Split commit adding support for new devices into separate commits
  for each device
- Add note where sleep gpio cfgs come from
- Ensure subject of all patches matches subsystem
- Add patch correcting GPI node name


Jonathan Bakker (17):
  ARM: dts: s5pv210: Add helper define for sleep gpio config
  ARM: dts: s5pv210: Add sleep GPIO configuration for fascinate4g
  ARM: dts: s5pv210: Add sleep GPIO configuration for galaxys
  ARM: dts: s5pv210: Set keep-power-in-suspend for SDHCI1 on aries
  ARM: dts: s5pv210: Disable pulls on GPIO i2c adapters for aries
  ARM: dts: s5pv210: Add WM8994 support to aries boards
  ARM: dts: s5pv210: Add FSA9480 support to Aries boards
  ARM: dts: s5pv210: Add touchkey support to aries boards
  ARM: dts: s5pv210: Add panel support to aries boards
  ARM: dts: s5pv210: Add remaining i2c-gpio adapters to aries
  ARM: dts: s5pv210: Disable pull for vibrator ena GPIO on aries
  ARM: dts: s5pv210: Add an ADC node
  ARM: dts: s5pv210: Enable ADC on aries boards
  ARM: dts: s5pv210: Assign clocks to MMC devices on aries
  ARM: dts: s5pv210: Correct FIMC definitions
  ARM: dts: s5pv210: Set MAX8998 GPIO pulls on aries
  ARM: dts: s5pv210: Correct gpi gpio node name

Paweł Chmiel (1):
  ARM: dts: s5pv210: Add si470x fmradio to galaxys

 arch/arm/boot/dts/s5pv210-aries.dtsi      | 359 ++++++++++++++++++++--
 arch/arm/boot/dts/s5pv210-fascinate4g.dts | 249 +++++++++++++++
 arch/arm/boot/dts/s5pv210-galaxys.dts     | 292 ++++++++++++++++++
 arch/arm/boot/dts/s5pv210-pinctrl.dtsi    |   9 +-
 arch/arm/boot/dts/s5pv210.dtsi            |  23 +-
 5 files changed, 907 insertions(+), 25 deletions(-)

-- 
2.20.1