| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <72511ddc-c94d-3c20-14cb-e971b000fc48@collabora.com>
Date: Fri, 1 May 2020 16:40:54 +0200
From: Enric Balletbo i Serra <enric.balletbo@...labora.com>
To: Chun-Kuang Hu <chunkuang.hu@...nel.org>
Cc: linux-kernel <linux-kernel@...r.kernel.org>,
Collabora Kernel ML <kernel@...labora.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Nicolas Boichat <drinkcat@...omium.org>,
Hsin-Yi Wang <hsinyi@...omium.org>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Daniel Vetter <daniel@...ll.ch>,
David Airlie <airlied@...ux.ie>,
Philipp Zabel <p.zabel@...gutronix.de>,
DRI Development <dri-devel@...ts.freedesktop.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@...ts.infradead.org>
Subject: Re: [PATCH v3 4/7] drm/mediatek: mtk_dsi: Convert to bridge driver
Hi Chun-Kuang,
Thank you for the review.
On 1/5/20 15:21, Chun-Kuang Hu wrote:
> Hi, Enric:
>
> Enric Balletbo i Serra <enric.balletbo@...labora.com> 於 2020年4月17日 週五 下午11:06寫道：
>>
>> Convert mtk_dsi to a bridge driver with built-in encoder support for
>> compatibility with existing component drivers.
>>
>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
>> ---
>>
>> Changes in v3:
>> - Add the bridge.type. (Laurent Pinchart)
>>
>> Changes in v2: None
>>
>> drivers/gpu/drm/mediatek/mtk_dsi.c | 93 ++++++++++++++++++++++--------
>> 1 file changed, 69 insertions(+), 24 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
>> index 37b8d7ffd835..869ae0a2e9f8 100644
>> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
>> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
>> @@ -180,6 +180,7 @@ struct mtk_dsi {
>> struct device *dev;
>> struct mipi_dsi_host host;
>> struct drm_encoder encoder;
>> + struct drm_bridge bridge;
>> struct drm_connector conn;
>> struct drm_panel *panel;
>> struct drm_bridge *next_bridge;
>> @@ -205,9 +206,9 @@ struct mtk_dsi {
>> const struct mtk_dsi_driver_data *driver_data;
>> };
>>
>> -static inline struct mtk_dsi *encoder_to_dsi(struct drm_encoder *e)
>> +static inline struct mtk_dsi *bridge_to_dsi(struct drm_bridge *b)
>> {
>> - return container_of(e, struct mtk_dsi, encoder);
>> + return container_of(b, struct mtk_dsi, bridge);
>> }
>>
>> static inline struct mtk_dsi *connector_to_dsi(struct drm_connector *c)
>> @@ -796,32 +797,43 @@ static const struct drm_encoder_funcs mtk_dsi_encoder_funcs = {
>> .destroy = mtk_dsi_encoder_destroy,
>> };
>>
>> -static bool mtk_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
>> - const struct drm_display_mode *mode,
>> - struct drm_display_mode *adjusted_mode)
>> +static int mtk_dsi_create_conn_enc(struct drm_device *drm, struct mtk_dsi *dsi);
>> +static void mtk_dsi_destroy_conn_enc(struct mtk_dsi *dsi);
>> +
>> +static int mtk_dsi_bridge_attach(struct drm_bridge *bridge,
>> + enum drm_bridge_attach_flags flags)
>> +{
>> + struct mtk_dsi *dsi = bridge_to_dsi(bridge);
>> +
>> + return mtk_dsi_create_conn_enc(bridge->dev, dsi);
>> +}
>> +
>> +static void mtk_dsi_bridge_detach(struct drm_bridge *bridge)
>> {
>> - return true;
>> + struct mtk_dsi *dsi = bridge_to_dsi(bridge);
>> +
>> + mtk_dsi_destroy_conn_enc(dsi);
>> }
>>
>> -static void mtk_dsi_encoder_mode_set(struct drm_encoder *encoder,
>> - struct drm_display_mode *mode,
>> - struct drm_display_mode *adjusted)
>> +static void mtk_dsi_bridge_mode_set(struct drm_bridge *bridge,
>> + const struct drm_display_mode *mode,
>> + const struct drm_display_mode *adjusted)
>> {
>> - struct mtk_dsi *dsi = encoder_to_dsi(encoder);
>> + struct mtk_dsi *dsi = bridge_to_dsi(bridge);
>>
>> drm_display_mode_to_videomode(adjusted, &dsi->vm);
>> }
>>
>> -static void mtk_dsi_encoder_disable(struct drm_encoder *encoder)
>> +static void mtk_dsi_bridge_disable(struct drm_bridge *bridge)
>> {
>> - struct mtk_dsi *dsi = encoder_to_dsi(encoder);
>> + struct mtk_dsi *dsi = bridge_to_dsi(bridge);
>>
>> mtk_output_dsi_disable(dsi);
>> }
>>
>> -static void mtk_dsi_encoder_enable(struct drm_encoder *encoder)
>> +static void mtk_dsi_bridge_enable(struct drm_bridge *bridge)
>> {
>> - struct mtk_dsi *dsi = encoder_to_dsi(encoder);
>> + struct mtk_dsi *dsi = bridge_to_dsi(bridge);
>>
>> mtk_output_dsi_enable(dsi);
>> }
>> @@ -833,11 +845,12 @@ static int mtk_dsi_connector_get_modes(struct drm_connector *connector)
>> return drm_panel_get_modes(dsi->panel, connector);
>> }
>>
>> -static const struct drm_encoder_helper_funcs mtk_dsi_encoder_helper_funcs = {
>> - .mode_fixup = mtk_dsi_encoder_mode_fixup,
>> - .mode_set = mtk_dsi_encoder_mode_set,
>> - .disable = mtk_dsi_encoder_disable,
>> - .enable = mtk_dsi_encoder_enable,
>> +static const struct drm_bridge_funcs mtk_dsi_bridge_funcs = {
>> + .attach = mtk_dsi_bridge_attach,
>> + .detach = mtk_dsi_bridge_detach,
>> + .disable = mtk_dsi_bridge_disable,
>> + .enable = mtk_dsi_bridge_enable,
>> + .mode_set = mtk_dsi_bridge_mode_set,
>> };
>>
>> static const struct drm_connector_funcs mtk_dsi_connector_funcs = {
>> @@ -1123,6 +1136,34 @@ static const struct mipi_dsi_host_ops mtk_dsi_ops = {
>> .transfer = mtk_dsi_host_transfer,
>> };
>>
>> +static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
>> +{
>> + int ret;
>> +
>> + ret = drm_encoder_init(drm, &dsi->encoder, &mtk_dsi_encoder_funcs,
>> + DRM_MODE_ENCODER_DSI, NULL);
>
> I'm a bit confused here. drm_encoder_init() exist here and in
> mtk_dsi_create_conn_enc(). Do you plan to init encodr twice?
>
Right, it should be removed from mtk_dsi_create_conn_enc(). I will do in next
version.
>> + if (ret) {
>> + DRM_ERROR("Failed to encoder init to drm\n");
>> + return ret;
>> + }
>> +
>> + /*
>> + * Currently display data paths are statically assigned to a crtc each.
>> + * crtc 0 is OVL0 -> COLOR0 -> AAL -> OD -> RDMA0 -> UFOE -> DSI0
>> + */
>> + dsi->encoder.possible_crtcs = 1;
>> +
>> + ret = drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL, 0);
>> + if (ret)
>> + goto err_cleanup_encoder;
>> +
>> + return 0;
>> +
>> +err_cleanup_encoder:
>> + drm_encoder_cleanup(&dsi->encoder);
>> + return ret;
>> +}
>> +
>> static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
>> {
>> int ret;
>> @@ -1136,11 +1177,9 @@ static int mtk_dsi_bind(struct device *dev, struct device *master, void *data)
>> return ret;
>> }
>>
>> - ret = mtk_dsi_create_conn_enc(drm, dsi);
>> - if (ret) {
>> - DRM_ERROR("Encoder create failed with %d\n", ret);
>> + ret = mtk_dsi_encoder_init(drm, dsi);
>> + if (ret)
>> goto err_unregister;
>> - }
>>
>> return 0;
>>
>> @@ -1155,7 +1194,6 @@ static void mtk_dsi_unbind(struct device *dev, struct device *master,
>> struct drm_device *drm = data;
>> struct mtk_dsi *dsi = dev_get_drvdata(dev);
>>
>> - mtk_dsi_destroy_conn_enc(dsi);
>
> There is mtk_dsi_encoder_init() in bind(), why no mtk_dsi_encoder_uninit() here?
>
Right, I need uninit the encoder but a simple call to drm_encoder_cleanup should
be enough. I don't think is needed create a new function for that. I'll do in
next version.
> Regards,
> Chun-Kuang.
>
>> mtk_ddp_comp_unregister(drm, &dsi->ddp_comp);
>> }
>>
>> @@ -1265,6 +1303,12 @@ static int mtk_dsi_probe(struct platform_device *pdev)
>>
>> platform_set_drvdata(pdev, dsi);
>>
>> + dsi->bridge.funcs = &mtk_dsi_bridge_funcs;
>> + dsi->bridge.of_node = dev->of_node;
>> + dsi->bridge.type = DRM_MODE_CONNECTOR_DSI;
>> +
>> + drm_bridge_add(&dsi->bridge);
>> +
>> ret = component_add(&pdev->dev, &mtk_dsi_component_ops);
>> if (ret) {
>> dev_err(&pdev->dev, "failed to add component: %d\n", ret);
>> @@ -1283,6 +1327,7 @@ static int mtk_dsi_remove(struct platform_device *pdev)
>> struct mtk_dsi *dsi = platform_get_drvdata(pdev);
>>
>> mtk_output_dsi_disable(dsi);
>> + drm_bridge_remove(&dsi->bridge);
>> component_del(&pdev->dev, &mtk_dsi_component_ops);
>> mipi_dsi_host_unregister(&dsi->host);
>>
>> --
>> 2.25.1
>>
Powered by blists - more mailing lists