lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Sat, 2 May 2020 08:30:36 +0200 From: Sam Ravnborg <sam@...nborg.org> To: dillon min <dillon.minfei@...il.com> Cc: Alexandre Torgue <alexandre.torgue@...com>, airlied@...ux.ie, Daniel Vetter <daniel@...ll.ch>, robh+dt@...nel.org, dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, mcoquelin.stm32@...il.com, linux-stm32@...md-mailman.stormreply.com, linux-arm-kernel@...ts.infradead.org, thierry.reding@...il.com Subject: Re: [PATCH 1/4] add dts node for drm panel driver ili9341 add dts i2c3 for stmpe touch add dts spi5 for gyro & ili9341 Hi dillon min > > okay, thanks alexandre, i will go through these docs. currently i'm on may > day holiday, will be back at next wensday. > after go back to work. i will separate this patch to five part with 9 > patchs , should be more clear > > dts releated > 1, ARM: dts: stm32: Add i2c3 node for stm32f429 > 2, ARM: dts: stm32: Add drm panel ili9341 nodes connect to ldtc > support for stm32f429-disco board > 3, ARM: dts: stm32: Add stmpe811 touch screen support for > stm32f429-disco board > 4, ARM: dts: stm32: Add l3gd20 gyroscope sensor support for > stm32f429-disco board > > clk releated > 1, clk: stm32: Fix ltdc loading hang in set clk rate, pll_hw set to > clks[PLL_VCO_SAI] but not clks[PLL_SAI] > 2, clk: stm32: Add CLK_IGNORE_UNUSED flags for ltdc, make sure ltdc clk > not be released after system startup > > spi releated > 1, spi: stm32: Add transfer mode SPI_SIMPLE_RX, SPI_3WIRE_RX support > for stm32f4 > > drm releated > 1, drm/panel: Add panel driver ilitek-ili9341 > > doc releated > 1, dt-bindings: display: panel: Add binding document for Ilitek Ili9341 Patch separation looks good. Please cc: me on both the binding and the panel patches. The binding must be in DT Schema format (.yaml). See a lot of examples in drm-misc-next for inspiration. Looks forward to see/review your submission. Sam
Powered by blists - more mailing lists