linux-kernel - [PATCH v2 0/6] Add Stinger96 and IoT Box board support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200503154215.23654-1-mani@kernel.org>
Date:   Sun,  3 May 2020 21:12:09 +0530
From:   mani@...nel.org
To:     robh+dt@...nel.org, mcoquelin.stm32@...il.com,
        alexandre.torgue@...com
Cc:     devicetree@...r.kernel.org,
        linux-stm32@...md-mailman.stormreply.com,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Manivannan Sadhasivam <mani@...nel.org>
Subject: [PATCH v2 0/6] Add Stinger96 and IoT Box board support

From: Manivannan Sadhasivam <mani@...nel.org>

Hello,

This series adds Stinger96 and IoT Box board support. These boards are
based on STM32MP157A SoC, designed and manufactured by Shiratech solutions.

The Stinger96 is a base board (96Boards IoT Extended edition) while IoT Box
adds one mezzanine on top of it and sold as a gateway device.

This series depends on below patchsets already submitted and gone through
reviews:

[PATCH v3 0/3] Add Reset and Wakeup support for CCS811
[PATCH v3 0/2] Add CTS/RTS gpio support to STM32 UART

More information about these boards can be found in below links:

https://www.shiratech-solutions.com/products/stinger96/
https://www.shiratech-solutions.com/products/iot-box/

Thanks,
Mani

Changes in v2:

* Used "stm32" prefix for all DT commits
* Dropped custom sdmmc2 pinctrl node since existing node itself has pullup
  enabled and works fine.

Manivannan Sadhasivam (6):
  dt-bindings: Add vendor prefix for Shiratech Solutions
  ARM: dts: stm32: Add missing pinctrl entries for STM32MP15
  dt-bindings: arm: stm32: Document Stinger96 compatible
  ARM: dts: stm32: Add Stinger96 board support
  dt-bindings: arm: stm32: Document IoT Box compatible
  ARM: dts: stm32: Add IoT Box board support

 .../devicetree/bindings/arm/stm32/stm32.yaml  |   2 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi      |  64 ++++
 arch/arm/boot/dts/stm32mp157a-iot-box.dts     |  68 ++++
 arch/arm/boot/dts/stm32mp157a-stinger96.dts   |  12 +
 arch/arm/boot/dts/stm32mp157a-stinger96.dtsi  | 342 ++++++++++++++++++
 7 files changed, 492 insertions(+)
 create mode 100644 arch/arm/boot/dts/stm32mp157a-iot-box.dts
 create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dts
 create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dtsi

-- 
2.17.1