| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200503122237.4af34181@archlinux>
Date: Sun, 3 May 2020 12:22:37 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Hans de Goede <hdegoede@...hat.com>
Cc: "Rafael J . Wysocki" <rjw@...ysocki.net>,
Len Brown <lenb@...nel.org>,
Darren Hart <dvhart@...radead.org>,
Andy Shevchenko <andy@...radead.org>,
linux-acpi@...r.kernel.org, platform-driver-x86@...r.kernel.org,
linux-kernel@...r.kernel.org, Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
linux-iio@...r.kernel.org,
Andy Shevchenko <andy.shevchenko@...il.com>
Subject: Re: [PATCH v3 10/11] iio: light: cm32181: Add support for parsing
CPM0 and CPM1 ACPI tables
On Tue, 28 Apr 2020 19:29:22 +0200
Hans de Goede <hdegoede@...hat.com> wrote:
> On ACPI based systems the CPLM3218 ACPI device node describing the
> CM3218[1] sensor typically will have some extra tables with register
> init values for initializing the sensor and calibration info.
>
> This is based on a newer version of cm32181.c, with a copyright of:
>
> * Copyright (C) 2014 Capella Microsystems Inc.
> * Author: Kevin Tsai <ktsai@...ellamicro.com>
> *
> * This program is free software; you can redistribute it and/or modify it
> * under the terms of the GNU General Public License version 2, as published
> * by the Free Software Foundation.
>
> Which is floating around on the net in various places, but the changes
> from this newer version never made it upstream.
>
> This was tested on the following models: Acer Switch 10 SW5-012 (CM32181)
> Asus T100TA (CM3218), Asus T100CHI (CM3218) and HP X2 10-n000nd (CM32181).
I assume it's far too much to hope this CPM0 / CPM1 stuff is actually defined
in a spec anywhere?
There are standard way of adding vendor specific data blobs to ACPI and this
isn't one of them (unless I'm missing something). People need to beat
up vendors earlier about this stuff.
Grumble over...
Code looks fine to me, but I'd like an ACPI review ideally.
Thanks,
Jonathan
>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>
> Signed-off-by: Hans de Goede <hdegoede@...hat.com>
> ---
> Changes in v2:
> - Factor out the parsing into a separate helper function
> ---
> drivers/iio/light/cm32181.c | 101 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 101 insertions(+)
>
> diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c
> index cae2264e4336..d8b128286527 100644
> --- a/drivers/iio/light/cm32181.c
> +++ b/drivers/iio/light/cm32181.c
> @@ -4,6 +4,7 @@
> * Author: Kevin Tsai <ktsai@...ellamicro.com>
> */
>
> +#include <linux/acpi.h>
> #include <linux/delay.h>
> #include <linux/err.h>
> #include <linux/i2c.h>
> @@ -53,6 +54,15 @@
>
> #define SMBUS_ALERT_RESPONSE_ADDRESS 0x0c
>
> +/* CPM0 Index 0: device-id (3218 or 32181), 1: Unknown, 2: init_regs_bitmap */
> +#define CPM0_REGS_BITMAP 2
> +#define CPM0_HEADER_SIZE 3
> +
> +/* CPM1 Index 0: lux_per_bit, 1: calibscale, 2: resolution (100000) */
> +#define CPM1_LUX_PER_BIT 0
> +#define CPM1_CALIBSCALE 1
> +#define CPM1_SIZE 3
> +
> /* CM3218 Family */
> static const int cm3218_als_it_bits[] = { 0, 1, 2, 3 };
> static const int cm3218_als_it_values[] = { 100000, 200000, 400000, 800000 };
> @@ -65,6 +75,7 @@ static const int cm32181_als_it_values[] = {
>
> struct cm32181_chip {
> struct i2c_client *client;
> + struct device *dev;
> struct mutex lock;
> u16 conf_regs[CM32181_CONF_REG_NUM];
> unsigned long init_regs_bitmap;
> @@ -76,6 +87,92 @@ struct cm32181_chip {
> const int *als_it_values;
> };
>
> +static int cm32181_read_als_it(struct cm32181_chip *cm32181, int *val2);
> +
> +#ifdef CONFIG_ACPI
> +/**
> + * cm32181_acpi_get_cpm() - Get CPM object from ACPI
> + * @client pointer of struct i2c_client.
> + * @obj_name pointer of ACPI object name.
> + * @count maximum size of return array.
> + * @vals pointer of array for return elements.
> + *
> + * Convert ACPI CPM table to array.
> + *
> + * Return: -ENODEV for fail. Otherwise is number of elements.
> + */
> +static int cm32181_acpi_get_cpm(struct device *dev, char *obj_name,
> + u64 *values, int count)
> +{
> + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
> + union acpi_object *cpm, *elem;
> + acpi_handle handle;
> + acpi_status status;
> + int i;
> +
> + handle = ACPI_HANDLE(dev);
> + if (!handle)
> + return -ENODEV;
> +
> + status = acpi_evaluate_object(handle, obj_name, NULL, &buffer);
> + if (ACPI_FAILURE(status)) {
> + dev_err(dev, "object %s not found\n", obj_name);
> + return -ENODEV;
> + }
> +
> + cpm = buffer.pointer;
> + if (cpm->package.count > count)
> + dev_warn(dev, "%s table contains %d values, only using first %d values\n",
> + obj_name, cpm->package.count, count);
> +
> + count = min_t(int, cpm->package.count, count);
> + for (i = 0; i < count; i++) {
> + elem = &(cpm->package.elements[i]);
> + values[i] = elem->integer.value;
> + }
> +
> + kfree(buffer.pointer);
> +
> + return count;
> +}
> +
> +static void cm32181_acpi_parse_cpm_tables(struct cm32181_chip *cm32181)
> +{
> + u64 vals[CPM0_HEADER_SIZE + CM32181_CONF_REG_NUM];
> + struct device *dev = cm32181->dev;
> + int i, count;
> +
> + count = cm32181_acpi_get_cpm(dev, "CPM0", vals, ARRAY_SIZE(vals));
> + if (count <= CPM0_HEADER_SIZE)
> + return;
> +
> + count -= CPM0_HEADER_SIZE;
> +
> + cm32181->init_regs_bitmap = vals[CPM0_REGS_BITMAP];
> + cm32181->init_regs_bitmap &= GENMASK(count - 1, 0);
> + for_each_set_bit(i, &cm32181->init_regs_bitmap, count)
> + cm32181->conf_regs[i] = vals[CPM0_HEADER_SIZE + i];
> +
> + count = cm32181_acpi_get_cpm(dev, "CPM1", vals, ARRAY_SIZE(vals));
> + if (count != CPM1_SIZE)
> + return;
> +
> + cm32181->lux_per_bit = vals[CPM1_LUX_PER_BIT];
> +
> + /* Check for uncalibrated devices */
> + if (vals[CPM1_CALIBSCALE] == CM32181_CALIBSCALE_DEFAULT)
> + return;
> +
> + cm32181->calibscale = vals[CPM1_CALIBSCALE];
> + /* CPM1 lux_per_bit is for the current it value */
> + cm32181_read_als_it(cm32181, &cm32181->lux_per_bit_base_it);
> +}
> +#else
> +static void cm32181_acpi_parse_cpm_tables(struct cm32181_chip *cm32181)
> +{
> +}
> +#endif /* CONFIG_ACPI */
> +
> /**
> * cm32181_reg_init() - Initialize CM32181 registers
> * @cm32181: pointer of struct cm32181.
> @@ -119,6 +216,9 @@ static int cm32181_reg_init(struct cm32181_chip *cm32181)
> cm32181->lux_per_bit = CM32181_LUX_PER_BIT;
> cm32181->lux_per_bit_base_it = CM32181_LUX_PER_BIT_BASE_IT;
>
> + if (ACPI_HANDLE(cm32181->dev))
> + cm32181_acpi_parse_cpm_tables(cm32181);
> +
> /* Initialize registers*/
> for_each_set_bit(i, &cm32181->init_regs_bitmap, CM32181_CONF_REG_NUM) {
> ret = i2c_smbus_write_word_data(client, i,
> @@ -361,6 +461,7 @@ static int cm32181_probe(struct i2c_client *client)
>
> cm32181 = iio_priv(indio_dev);
> cm32181->client = client;
> + cm32181->dev = dev;
>
> mutex_init(&cm32181->lock);
> indio_dev->dev.parent = dev;
Powered by blists - more mailing lists