lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200503113415.21034-2-stanley.chu@mediatek.com>
Date:   Sun, 3 May 2020 19:34:08 +0800
From:   Stanley Chu <stanley.chu@...iatek.com>
To:     <linux-scsi@...r.kernel.org>, <martin.petersen@...cle.com>,
        <avri.altman@....com>, <alim.akhtar@...sung.com>,
        <jejb@...ux.ibm.com>, <asutoshd@...eaurora.org>
CC:     <beanhuo@...ron.com>, <cang@...eaurora.org>,
        <matthias.bgg@...il.com>, <bvanassche@....org>,
        <linux-mediatek@...ts.infradead.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <kuohong.wang@...iatek.com>,
        <peter.wang@...iatek.com>, <chun-hung.wu@...iatek.com>,
        <andy.teng@...iatek.com>, Stanley Chu <stanley.chu@...iatek.com>
Subject: [PATCH v5 1/8] scsi: ufs: enable WriteBooster on some pre-3.1 UFS devices

WriteBooster feature can be supported by some pre-3.1 UFS devices
by upgrading firmware.

To enable WriteBooster feature in such devices, introduce a device
quirk to relax the entrance condition of ufshcd_wb_probe() to allow
host driver to check those devices' WriteBooster capability.

WriteBooster feature can be available if below all conditions are
satisfied,

1. Host enables WriteBooster capability
2. UFS 3.1 device or UFS pre-3.1 device with quirk
   UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES enabled
3. Device descriptor has dExtendedUFSFeaturesSupport field
4. WriteBooster support is specified in above field

Signed-off-by: Stanley Chu <stanley.chu@...iatek.com>
---
 drivers/scsi/ufs/ufs_quirks.h |  7 ++++
 drivers/scsi/ufs/ufshcd.c     | 67 ++++++++++++++++++++++-------------
 2 files changed, 49 insertions(+), 25 deletions(-)

diff --git a/drivers/scsi/ufs/ufs_quirks.h b/drivers/scsi/ufs/ufs_quirks.h
index df7a1e6805a3..e3175a63c676 100644
--- a/drivers/scsi/ufs/ufs_quirks.h
+++ b/drivers/scsi/ufs/ufs_quirks.h
@@ -101,4 +101,11 @@ struct ufs_dev_fix {
  */
 #define UFS_DEVICE_QUIRK_HOST_VS_DEBUGSAVECONFIGTIME	(1 << 9)
 
+/*
+ * Some pre-3.1 UFS devices can support extended features by upgrading
+ * the firmware. Enable this quirk to make UFS core driver probe and enable
+ * supported features on such devices.
+ */
+#define UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES (1 << 10)
+
 #endif /* UFS_QUIRKS_H_ */
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 915e963398c4..04ddfb15e858 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6800,9 +6800,19 @@ static int ufshcd_scsi_add_wlus(struct ufs_hba *hba)
 
 static void ufshcd_wb_probe(struct ufs_hba *hba, u8 *desc_buf)
 {
+	if (!ufshcd_is_wb_allowed(hba))
+		return;
+
+	if (hba->desc_size.dev_desc <= DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP)
+		goto wb_disabled;
+
 	hba->dev_info.d_ext_ufs_feature_sup =
 		get_unaligned_be32(desc_buf +
 				   DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP);
+
+	if (!(hba->dev_info.d_ext_ufs_feature_sup & UFS_DEV_WRITE_BOOSTER_SUP))
+		goto wb_disabled;
+
 	/*
 	 * WB may be supported but not configured while provisioning.
 	 * The spec says, in dedicated wb buffer mode,
@@ -6818,11 +6828,29 @@ static void ufshcd_wb_probe(struct ufs_hba *hba, u8 *desc_buf)
 	hba->dev_info.b_presrv_uspc_en =
 		desc_buf[DEVICE_DESC_PARAM_WB_PRESRV_USRSPC_EN];
 
-	if (!((hba->dev_info.d_ext_ufs_feature_sup &
-		 UFS_DEV_WRITE_BOOSTER_SUP) &&
-		hba->dev_info.b_wb_buffer_type &&
+	if (!(hba->dev_info.b_wb_buffer_type &&
 	      hba->dev_info.d_wb_alloc_units))
-		hba->caps &= ~UFSHCD_CAP_WB_EN;
+		goto wb_disabled;
+
+	return;
+
+wb_disabled:
+	hba->caps &= ~UFSHCD_CAP_WB_EN;
+}
+
+static void ufs_fixup_device_setup(struct ufs_hba *hba)
+{
+	struct ufs_dev_fix *f;
+	struct ufs_dev_info *dev_info = &hba->dev_info;
+
+	for (f = ufs_fixups; f->quirk; f++) {
+		if ((f->wmanufacturerid == dev_info->wmanufacturerid ||
+		     f->wmanufacturerid == UFS_ANY_VENDOR) &&
+		     ((dev_info->model &&
+		       STR_PRFX_EQUAL(f->model, dev_info->model)) ||
+		      !strcmp(f->model, UFS_ANY_MODEL)))
+			hba->dev_quirks |= f->quirk;
+	}
 }
 
 static int ufs_get_device_desc(struct ufs_hba *hba)
@@ -6862,10 +6890,6 @@ static int ufs_get_device_desc(struct ufs_hba *hba)
 
 	model_index = desc_buf[DEVICE_DESC_PARAM_PRDCT_NAME];
 
-	/* Enable WB only for UFS-3.1 */
-	if (dev_info->wspecversion >= 0x310)
-		ufshcd_wb_probe(hba, desc_buf);
-
 	err = ufshcd_read_string_desc(hba, model_index,
 				      &dev_info->model, SD_ASCII_STD);
 	if (err < 0) {
@@ -6874,6 +6898,16 @@ static int ufs_get_device_desc(struct ufs_hba *hba)
 		goto out;
 	}
 
+	ufs_fixup_device_setup(hba);
+
+	/*
+	 * Probe WB only for UFS-3.1 devices or UFS devices with quirk
+	 * UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES enabled
+	 */
+	if (dev_info->wspecversion >= 0x310 ||
+	    (hba->dev_quirks & UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES))
+		ufshcd_wb_probe(hba, desc_buf);
+
 	/*
 	 * ufshcd_read_string_desc returns size of the string
 	 * reset the error value
@@ -6893,21 +6927,6 @@ static void ufs_put_device_desc(struct ufs_hba *hba)
 	dev_info->model = NULL;
 }
 
-static void ufs_fixup_device_setup(struct ufs_hba *hba)
-{
-	struct ufs_dev_fix *f;
-	struct ufs_dev_info *dev_info = &hba->dev_info;
-
-	for (f = ufs_fixups; f->quirk; f++) {
-		if ((f->wmanufacturerid == dev_info->wmanufacturerid ||
-		     f->wmanufacturerid == UFS_ANY_VENDOR) &&
-		     ((dev_info->model &&
-		       STR_PRFX_EQUAL(f->model, dev_info->model)) ||
-		      !strcmp(f->model, UFS_ANY_MODEL)))
-			hba->dev_quirks |= f->quirk;
-	}
-}
-
 /**
  * ufshcd_tune_pa_tactivate - Tunes PA_TActivate of local UniPro
  * @hba: per-adapter instance
@@ -7244,8 +7263,6 @@ static int ufshcd_device_params_init(struct ufs_hba *hba)
 
 	ufshcd_get_ref_clk_gating_wait(hba);
 
-	ufs_fixup_device_setup(hba);
-
 	if (!ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_READ_FLAG,
 			QUERY_FLAG_IDN_PWR_ON_WPE, &flag))
 		hba->dev_info.f_power_on_wp_en = flag;
-- 
2.18.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ