linux-kernel - [PATCH 5.4 17/57] mmc: meson-mx-sdio: remove the broken ->card

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200504165457.896543710@linuxfoundation.org>
Date:   Mon,  4 May 2020 19:57:21 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
        Ulf Hansson <ulf.hansson@...aro.org>
Subject: [PATCH 5.4 17/57] mmc: meson-mx-sdio: remove the broken ->card_busy() op

From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>

commit ddca1092c4324c89cf692b5efe655aa251864b51 upstream.

The recent commit 0d84c3e6a5b2 ("mmc: core: Convert to
mmc_poll_for_busy() for erase/trim/discard") makes use of the
->card_busy() op for SD cards. This uncovered that the ->card_busy() op
in the Meson SDIO driver was never working right:
while polling the busy status with ->card_busy()
meson_mx_mmc_card_busy() reads only one of the two MESON_MX_SDIO_IRQC
register values 0x1f001f10 or 0x1f003f10. This translates to "three out
of four DAT lines are HIGH" and "all four DAT lines are HIGH", which
is interpreted as "the card is busy".

It turns out that no situation can be observed where all four DAT lines
are LOW, meaning the card is not busy anymore. Upon further research the
3.10 vendor driver for this controller does not implement the
->card_busy() op.

Remove the ->card_busy() op from the meson-mx-sdio driver since it is
not working. At the time of writing this patch it is not clear what's
needed to make the ->card_busy() implementation work with this specific
controller hardware. For all use-cases which have previously worked the
MMC_CAP_WAIT_WHILE_BUSY flag is now taking over, even if we don't have
a ->card_busy() op anymore.

Fixes: ed80a13bb4c4c9 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Cc: stable@...r.kernel.org
Link: https://lore.kernel.org/r/20200416183513.993763-3-martin.blumenstingl@googlemail.com
Signed-off-by: Ulf Hansson <ulf.hansson@...aro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/mmc/host/meson-mx-sdio.c |    9 ---------
 1 file changed, 9 deletions(-)

--- a/drivers/mmc/host/meson-mx-sdio.c
+++ b/drivers/mmc/host/meson-mx-sdio.c
@@ -357,14 +357,6 @@ static void meson_mx_mmc_request(struct
 		meson_mx_mmc_start_cmd(mmc, mrq->cmd);
 }
 
-static int meson_mx_mmc_card_busy(struct mmc_host *mmc)
-{
-	struct meson_mx_mmc_host *host = mmc_priv(mmc);
-	u32 irqc = readl(host->base + MESON_MX_SDIO_IRQC);
-
-	return !!(irqc & MESON_MX_SDIO_IRQC_FORCE_DATA_DAT_MASK);
-}
-
 static void meson_mx_mmc_read_response(struct mmc_host *mmc,
 				       struct mmc_command *cmd)
 {
@@ -506,7 +498,6 @@ static void meson_mx_mmc_timeout(struct
 static struct mmc_host_ops meson_mx_mmc_ops = {
 	.request		= meson_mx_mmc_request,
 	.set_ios		= meson_mx_mmc_set_ios,
-	.card_busy		= meson_mx_mmc_card_busy,
 	.get_cd			= mmc_gpio_get_cd,
 	.get_ro			= mmc_gpio_get_ro,
 };