linux-kernel - RE: [PATCH v2 2/2] PCI: hv: Retry PCI bus D0 entry when the first attempt failed with invalid device state

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <MW2PR2101MB1052F3C838E8E49823FCF47DD7A60@MW2PR2101MB1052.namprd21.prod.outlook.com>
Date:   Mon, 4 May 2020 23:45:58 +0000
From:   Michael Kelley <mikelley@...rosoft.com>
To:     Wei Hu <weh@...rosoft.com>, KY Srinivasan <kys@...rosoft.com>,
        Haiyang Zhang <haiyangz@...rosoft.com>,
        Stephen Hemminger <sthemmin@...rosoft.com>,
        "wei.liu@...nel.org" <wei.liu@...nel.org>,
        "lorenzo.pieralisi@....com" <lorenzo.pieralisi@....com>,
        "robh@...nel.org" <robh@...nel.org>,
        "bhelgaas@...gle.com" <bhelgaas@...gle.com>,
        "linux-hyperv@...r.kernel.org" <linux-hyperv@...r.kernel.org>,
        "linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Dexuan Cui <decui@...rosoft.com>
Subject: RE: [PATCH v2 2/2] PCI: hv: Retry PCI bus D0 entry when the first
 attempt failed with invalid device state

From: Wei Hu <weh@...rosoft.com> Sent: Thursday, April 30, 2020 10:37 PM
> 
> In the case of kdump, the PCI device was not cleanly shut down
> before the kdump kernel starts. This causes the initial
> attempt of entering D0 state in the kdump kernel to fail with
> invalid device state returned from Hyper-V host.
> When this happens, explicitly call PCI bus exit and retry to
> enter the D0 state.
> 
> Signed-off-by: Wei Hu <weh@...rosoft.com>
> ---
>    v2: Incorporate review comments from Michael Kelley, Dexuan Cui and
>    Bjorn Helgaas
> 
>  drivers/pci/controller/pci-hyperv.c | 40 +++++++++++++++++++++++++++--
>  1 file changed, 38 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
> index e6fac0187722..92092a47d3af 100644
> --- a/drivers/pci/controller/pci-hyperv.c
> +++ b/drivers/pci/controller/pci-hyperv.c
> @@ -2739,6 +2739,8 @@ static void hv_free_config_window(struct hv_pcibus_device
> *hbus)
>  	vmbus_free_mmio(hbus->mem_config->start, PCI_CONFIG_MMIO_LENGTH);
>  }
> 
> +static int hv_pci_bus_exit(struct hv_device *hdev, bool keep_devs);
> +
>  /**
>   * hv_pci_enter_d0() - Bring the "bus" into the D0 power state
>   * @hdev:	VMBus's tracking struct for this root PCI bus
> @@ -2751,8 +2753,10 @@ static int hv_pci_enter_d0(struct hv_device *hdev)
>  	struct pci_bus_d0_entry *d0_entry;
>  	struct hv_pci_compl comp_pkt;
>  	struct pci_packet *pkt;
> +	bool retry = true;
>  	int ret;
> 
> +enter_d0_retry:
>  	/*
>  	 * Tell the host that the bus is ready to use, and moved into the
>  	 * powered-on state.  This includes telling the host which region
> @@ -2779,6 +2783,38 @@ static int hv_pci_enter_d0(struct hv_device *hdev)
>  	if (ret)
>  		goto exit;
> 
> +	/*
> +	 * In certain case (Kdump) the pci device of interest was
> +	 * not cleanly shut down and resource is still held on host
> +	 * side, the host could return invalid device status.
> +	 * We need to explicitly request host to release the resource
> +	 * and try to enter D0 again.
> +	 */
> +	if (comp_pkt.completion_status < 0 && retry) {
> +		retry = false;
> +
> +		dev_err(&hdev->device, "Retrying D0 Entry\n");
> +
> +		/*
> +		 * Hv_pci_bus_exit() calls hv_send_resource_released()
> +		 * to free up resources of its child devices.
> +		 * In the kdump kernel we need to set the
> +		 * wslot_res_allocated to 255 so it scans all child
> +		 * devices to release resources allocated in the
> +		 * normal kernel before panic happened.
> +		 */
> +		hbus->wslot_res_allocated = 255;
> +
> +		ret = hv_pci_bus_exit(hdev, true);
> +
> +		if (ret == 0) {
> +			kfree(pkt);
> +			goto enter_d0_retry;
> +		}
> +		dev_err(&hdev->device,
> +			"Retrying D0 failed with ret %d\n", ret);
> +	}
> +
>  	if (comp_pkt.completion_status < 0) {
>  		dev_err(&hdev->device,
>  			"PCI Pass-through VSP failed D0 Entry with status %x\n",
> @@ -3185,7 +3221,7 @@ static int hv_pci_probe(struct hv_device *hdev,
>  	return ret;
>  }
> 
> -static int hv_pci_bus_exit(struct hv_device *hdev, bool hibernating)
> +static int hv_pci_bus_exit(struct hv_device *hdev, bool keep_devs)
>  {
>  	struct hv_pcibus_device *hbus = hv_get_drvdata(hdev);
>  	struct {
> @@ -3203,7 +3239,7 @@ static int hv_pci_bus_exit(struct hv_device *hdev, bool
> hibernating)
>  	if (hdev->channel->rescind)
>  		return 0;
> 
> -	if (!hibernating) {
> +	if (!keep_devs) {
>  		/* Delete any children which might still exist. */
>  		dr = kzalloc(sizeof(*dr), GFP_KERNEL);
>  		if (dr && hv_pci_start_relations_work(hbus, dr))
> --
> 2.20.1

Reviewed-by: Michael Kelley <mikelley@...rosoft.com>