lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200504091952.15820-1-kai.heng.feng@canonical.com>
Date:   Mon,  4 May 2020 17:19:52 +0800
From:   Kai-Heng Feng <kai.heng.feng@...onical.com>
To:     mathias.nyman@...el.com
Cc:     Kai-Heng Feng <kai.heng.feng@...onical.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        linux-usb@...r.kernel.org (open list:USB XHCI DRIVER),
        linux-kernel@...r.kernel.org (open list)
Subject: [PATCH] xhci: Prevent runtime suspend all the time with XHCI_RESET_ON_RESUME quirk

Etron EJ168 USB 3.0 Host Controller stops working after S3, if it was
runtime suspended previously:
[  370.080359] pci 0000:02:00.0: can't change power state from D3cold to D0 (config space inaccessible)
[  370.080477] xhci_hcd 0000:04:00.0: can't change power state from D3cold to D0 (config space inaccessible)
[  370.080532] pcieport 0000:00:1c.0: DPC: containment event, status:0x1f05 source:0x0200
[  370.080533] pcieport 0000:00:1c.0: DPC: ERR_FATAL detected
[  370.080536] xhci_hcd 0000:04:00.0: can't change power state from D3hot to D0 (config space inaccessible)
[  370.080552] xhci_hcd 0000:04:00.0: AER: can't recover (no error_detected callback)
[  370.080566] usb usb3: root hub lost power or was reset
[  370.080566] usb usb4: root hub lost power or was reset
[  370.080572] xhci_hcd 0000:04:00.0: Host halt failed, -19
[  370.080574] xhci_hcd 0000:04:00.0: Host not accessible, reset failed.
[  370.080575] xhci_hcd 0000:04:00.0: PCI post-resume error -19!
[  370.080586] xhci_hcd 0000:04:00.0: HC died; cleaning up

This can be fixed by not runtime suspend the controller at all.

So instead of conditionally runtime suspend the controller, always
prevent runtime suspend with XHCI_RESET_ON_RESUME quirk.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
---
 drivers/usb/host/xhci-pci.c |  3 ++-
 drivers/usb/host/xhci.c     | 19 -------------------
 2 files changed, 2 insertions(+), 20 deletions(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 766b74723e64..7d2660923dae 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -371,7 +371,8 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		xhci->shared_hcd->can_do_streams = 1;
 
 	/* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
-	pm_runtime_put_noidle(&dev->dev);
+	if (!(xhci->quirks & XHCI_RESET_ON_RESUME))
+		pm_runtime_put_noidle(&dev->dev);
 
 	if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
 		pm_runtime_allow(&dev->dev);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index bee5deccc83d..8a1e3172405b 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3860,16 +3860,6 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
 	struct xhci_slot_ctx *slot_ctx;
 	int i, ret;
 
-#ifndef CONFIG_USB_DEFAULT_PERSIST
-	/*
-	 * We called pm_runtime_get_noresume when the device was attached.
-	 * Decrement the counter here to allow controller to runtime suspend
-	 * if no devices remain.
-	 */
-	if (xhci->quirks & XHCI_RESET_ON_RESUME)
-		pm_runtime_put_noidle(hcd->self.controller);
-#endif
-
 	ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);
 	/* If the host is halted due to driver unload, we still need to free the
 	 * device.
@@ -4020,15 +4010,6 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
 
 	xhci_debugfs_create_slot(xhci, slot_id);
 
-#ifndef CONFIG_USB_DEFAULT_PERSIST
-	/*
-	 * If resetting upon resume, we can't put the controller into runtime
-	 * suspend if there is a device attached.
-	 */
-	if (xhci->quirks & XHCI_RESET_ON_RESUME)
-		pm_runtime_get_noresume(hcd->self.controller);
-#endif
-
 	/* Is this a LS or FS device under a HS hub? */
 	/* Hub or peripherial? */
 	return 1;
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ